INFINITI Q60 COUPE 2021 Quick Reference Guide

8
Two positions for the driver’s seat, steering column and outside mirrors can be stored in
the memory seat system. To set a memory position:
1.

Place the ignition swit
ch in the ON position. (The vehicle should be stopped while
setting the memory.)
2.


Adjust the driv
er’s seat, steering column
and outside mirrors to the desired
positions using the adjusting switches
for each feature.
3.




Push the SET
switch
, and within 5
seconds, push the memory switch (1 or 2)
. The indicator light for the memory
switch you select will illuminate for
approximately 5 seconds and a chime will
sound when the memory is stored.
The steering column will automatically move when the driver’s side door is
opened to allow the driver to get in and out of the driver’s seat more easily.
“Lift Steering upon Exit” and “Slide Driver Seat Back on Exit” can be adjusted in the
lower touch-screen display under “Comfort & Convenience”.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
Memory Seat (if so equipped)

9
Starting/Stopping
the Engine
It is important to make sure
the INFINITI Intelligent Key
is with you (that is, in your
pocket or purse).
1.

Depress the br
ake pedal.
2.


Push the ignition switch
S

TART/STOP button to
the ON position.
TURNING THE ENGINE OFF
1.


Mo
ve the shift lever to the P (PARK) position
and apply the parking brake.
2.


Push the ignition switch
START/STOP button
to turn off the engine.
Please see your Owner’s Manual for important safety information,
system limitations, and additional operating and feature information.
Power Folding Outside Mirrors
(if so equipped)
ADJUSTING THE OUTSIDE MIRRORS:
•
To adjust the outside mirr
ors, move the
switch
right or left to select the right
or left mirror.
•
Adjust the position o

f the mirror using the
directional control switch
.
FOLDING THE OUTSIDE MIRRORS:
•
To f

old the mirrors closed, push
the
switch .
•
To open the mirr

ors, push the
switch .
REVERSE TILT-DOWN FEATURE
(IF SO EQUIPPED)
When backing up the vehicle, the outside
mirrors will turn downward automatically to
provide better rear visibility. To enable the
reverse tilt-down feature, move the switch

to either the left or right position.
If the switch
is set in the center (neutral) position, the mirror will not tilt down
when reversing.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.

10
AUTOMATIC ANTI-GLARE REARVIEW MIRROR
The inside mirror is designed so that it automatically dims during night-time
conditions and according to the intensity of the headlights of the vehicle following
you. The automatic anti-glare feature is activated when the ignition switch is in
the ON position.
• The indicat
or light
will illuminate when the automatic anti-glare
feature is operating.
• To turn o

ff the anti-glare feature, press the O button on the rearview mirror. The
indicator light will turn off.
• To turn on the an

ti-glare feature, press the | button on the rearview mirror. The
indicator light
will turn on.
PROGRAMING THE HOMELINK
® UNIVERSAL TRANSCEIVER: 1.
Position the handheld tr
ansceiver 1-3 in (2-8 cm) away from the HomeLink
surface, keeping the HomeLink indicator light in view.
2.


Press and hold the desir

ed HomeLink button and the handheld transmitter button
simultaneously until the HomeLink indicator light flashes slowly and then rapidly.
3.





Both butt

ons may be released when the indicator light flashes rapidly.
4.


Press and hold the pr

ogramed HomeLink button and observe the indicator light. A solid, continuous light indicates the programing is complete. If
the indicator light rapidly blinks for two seconds and then turns to a solid, continuous light, continue with steps for a rolling code device.
5.


At the r

eceiver located on the garage door opener motor, locate the “learn” or “smart” button. If there is difficulty locating the button, reference the
garage door opener’s manual. Once the button is pressed, you have approximately 30 seconds to initiate the next step.
6.


Press and hold the pr

ogramed HomeLink button for two seconds and release. Repeat the sequence up to three times to complete the programing
process. HomeLink should now activate your rolling code equipped device.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information.
Automatic Anti-Glare Rearview Mirror with HomeLink® Universal
Transceiver (if so equipped)
HomeLink

11
Heater and Air Conditioner (automatic)
The climate controls can be adjusted using the buttons on either side of the lower
display or through the “Climate” screen
on the lower display.
•


To ac

cess the “Climate” screen
, press the CLIMATE button below the
lower display.
HEATED STEERING WHEEL (IF SO EQUIPPED)
•


To turn the heat

ed steering wheel on or off, touch the “Steering Heater” key
on
the lower display.
HEATED SEATS (IF SO EQUIPPED)
The front seats can be warmed by built-in heaters. The heating system of the driver’s
seat and front passenger seat can be operated independently.
•


Push the heated seat swit

ches
on the instrument panel or to operate through
the touch-screen, press the CLIMATE button
and touch the heated seat key(s)
on the lower display to select the seat heating mode.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.

12
To turn the rain sensor function on and off:
1.

Press the
MENU button below the lower display.
2. Touch the

“Settings” key and then the “Comfort &
Convenience” key
on the display.
3. Touch the

“Rain Sensor” key
to toggle the
feature ON and OFF.
When the rain-sensing function is disabled, the AUTO
position on the wiper stalk will work in conventional
intermittent mode.
WIPER BLADE REPLACEMENT PROCEDURE
The windshield wipers must be in the service position
in order to replace the wiper blades.
To move the wiper blades to the service position:
•


When the ignition switch is in the ON position or

within 60 seconds of placing the ignition switch
in the OFF position, lift the windshield wiper
and washer lever upwards twice in less than 0.5
seconds. The windshield wipers will move to the
service position automatically, and the wiper blades
can now be replaced.
To move the wiper blades back to the original position:
•


Place the wiper

arm in the down position and lift the wiper and washer lever up
for more than 1 second, or lower the lever down to operate at any wiper speed.
Wiper and Washer Switch
Move the lever up or down to one of the following
positions to operate the windshield wipers:
MIST
One sweep oper

ation
OFF
Wipers are OFF
AU

TO
Speed-sensing and rain-sensing aut

omatic wipe
LO
Con

tinuous wipe, slow
HI
Con

tinuous wipe, fast
To adjust the wiper sensitivity for the AUTO setting, twist
the control ring
.
Pull the lever
toward you to operate the
windshield washer.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information.

13
Vehicle Information Display
The vehicle information display will provide warnings and information for
items such as the following:
USING THE VEHICLE INFORMATION DISPLAY
To change the displayed item on the vehicle information
display
, press the or button on the steering wheel.
The odometer and twin trip odometer are displayed in the vehicle
information display when the ignition switch is in the ON position.
RESETTING THE TRIP ODOMETER
Pushing the TRIP RESET switch
under the combination meter
panel changes display to TRIP A or TRIP B.
Pushing the TRIP RESET switch
for more than 1 second resets
the trip odometer to zero.
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
• Automatic Transmission (AT)
•


All-Wheel Driv
e (AWD)
• Cruise Con

trol
•


Int
elligent Cruise Control (ICC)
• Activ

e Lane Control
•


Lane Departure
Warning (LDW)/
Lane Departure Prevention (LDP)
•


Blind Spot
Warning (BSW)
•


Blind Spot In
tervention (BSI) • Back -up Collision
Intervention (BCI)
•


Distanc
e Control Assist (DCA)
• Forw

ard Emergency Braking (FEB)
•


Pr
edictive Forward
Collision Warning (PFCW)
•


A
ctive Trace Control
•


Int
elligent Key System

14
Fuel-filler Door
Passenger Rear Seat Entry/Exit
To access the rear seat:
1. Pull the lev
er
upward to
fold the seatback forward.
2. Press the butt

on
to
slide the front seat forward
and press the button

again to stop the seat.
To return the front seat to its
original position:
1. Pull the lev

er
upward and push the seatback to the locked,
upright position.
2. Press the butt

on
to slide the front seat backward.
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
To open the fuel-filler door,
unlock the vehicle and gently
push the upper left side of
the
fuel-filler

door.
Please see your Owner’s Manual for
important safety information, system
limitations, and additional operating
and feature information.
To adjust the time and the appearance of the clock
on the display:
1. Pr
ess the MENU button
below the lower display. Then,
touch the “Settings” key on the lower display.
2. Loc

ate and touch the “Clock” key to adjust “On-Screen
Clock”, “Daylight Savings Time”, “Clock Format (24h)”
and “Time Zone”.
Please see your INFINITI InTouch™ Owner’s Manual for important safety information,
system limitations, and additional operating and feature information.
Clock Set/Adjustment

15
Connecting your Cellular Phone or Device via Bluetooth®*
Using Bluetooth® technology, you can connect (pair) your cellular phone with the in-vehicle system for hands-free use of your cellular phone.
1.


Press the

MENU button below the lower display.
2.


Touch the

“Settings” key on the lower display.
3.





Touch the

“Connections” key.
4. Touch the

“Add New” key.
5.


Follo

w the instructions on the screen. If a PIN appears on the screen, operate the Bluetooth
® device to enter/confirm the PIN.
The paired cellular phone will be added to the list on the “Connections” screen.
FAVORITE HANDS-FREE PHONE
•


You c

an register a favorite hands-free cellular phone. The device selected as a favorite will be marked with a star.
For any Bluetooth
® connectivity issues, reboot your cellular phone or device.
* Some jurisdictions prohibit the use of cellular telephones while driving.
Please see your INFINITI InTouch™ Owner’s Manual for important safety information, system limitations, and additional operating and feature information.

16
Bluetooth® Hands-free Phone System*
SYSTEM OPERATING TIPS
•

The int
erior of the vehicle should be as quiet as possible.
•


Speak natur
ally. Speaking too fast, too slow, too soft, or too loud makes voice recognition more difficult.
•


Con
firm that the correct voice commands are being used.
•


To skip the
voice prompt and give the command immediately, press the
button on the steering wheel to
interrupt the system. Speak the next command after the tone sounds.
•


To c

ancel the command, press and hold the
button on the steering wheel.
MAKING A CALL
1. Press the

MENU button below the lower display and touch the Phone key on the lower display.
2.


Select one of

the available keys on the “Phone” screen; including “Quick Dial”, “Phonebook”, “Call History”, or
“Dial Number” to make a call.
RECEIVING A CALL
•


To answ

er the call, press the
button on the steering wheel or touch the Answer key on the lower display.
•


To r

eject the call, press and hold the
button on the steering wheel or touch the Decline key.
•


To hold the c

all, touch the “Hold Call” key.
DURING A CALL
•


To hang up the phone,

touch the
Hang up key on the lower display.
•


To answ

er the call from the second person and place the first caller on hold, press the
button on the
steering wheel or touch the Answer key.
•


To r

eject a call from the second person and continue the conversation with the first caller, touch the
Decline key.
•


To hang up the phone and r

eturn to the conversation with the first caller, touch the
Hang up key.
• To swit

ch between two calls, touch the “Switch Call” key.
For any Bluetooth
® connectivity issues, reboot your cellular phone or device.* Some jurisdictions prohibit the use of cellular telephones while driving.
Please see your INFINITI InTouch™ Owner’s Manual for important safety information, system limitations, and additional operating and feature information.

17
Bluetooth®
Streaming Audio
*
If you have a compatible Bluetooth® device with
streaming audio (A2DP and AVRCP profiles),
you can set up a wireless connection between
your Bluetooth
® device and the in-vehicle audio
system, enabling you to listen to the audio from
your device through the vehicle’s audio system.
After connecting your Bluetooth
® device, press
the DISC•AUX button
on the control panel
to switch to Bluetooth® Streaming Audio.
For any Bluetooth
® connectivity issues, reboot
your cellular phone or device.
* Some jurisdictions prohibit the use of cellular
telephones while driving.
Please see your INFINITI InTouch™ Owner’s Manual for
important safety information, system limitations, and additional
operating and feature information.
FM/AM/HD Radio®/SiriusXM®
Radio (if so equipped)
The AUDIO button displays the audio screen.
The power button turns the system on or off. Turning the knob adjusts the volume.
Change stations with the SEEK•TRACK buttons. This applies to satellite,
HD R
adio® and CDs.
Manually tune the radio through the TUNE•CH•FOLDER buttons.
The RADIO butt on changes the radio in the order of AM, FM and satellite radio.
The DISC•AUX button changes the audio source.
Touch and hold the desired station to store a preset. This applies to AM, FM , or satellite
radio stations.
Please see your INFINITI InTouch™ Owner’s Manual for important safety information, system limitations, and additional
operating and feature information.