wiper blades INFINITI Q60 COUPE 2021 Quick Reference Guide

12
To turn the rain sensor function on and off:
1.

Press the
MENU button below the lower display.
2. Touch the

“Settings” key and then the “Comfort &
Convenience” key
on the display.
3. Touch the

“Rain Sensor” key
to toggle the
feature ON and OFF.
When the rain-sensing function is disabled, the AUTO
position on the wiper stalk will work in conventional
intermittent mode.
WIPER BLADE REPLACEMENT PROCEDURE
The windshield wipers must be in the service position
in order to replace the wiper blades.
To move the wiper blades to the service position:
•


When the ignition switch is in the ON position or

within 60 seconds of placing the ignition switch
in the OFF position, lift the windshield wiper
and washer lever upwards twice in less than 0.5
seconds. The windshield wipers will move to the
service position automatically, and the wiper blades
can now be replaced.
To move the wiper blades back to the original position:
•


Place the wiper

arm in the down position and lift the wiper and washer lever up
for more than 1 second, or lower the lever down to operate at any wiper speed.
Wiper and Washer Switch
Move the lever up or down to one of the following
positions to operate the windshield wipers:
MIST
One sweep oper

ation
OFF
Wipers are OFF
AU

TO
Speed-sensing and rain-sensing aut

omatic wipe
LO
Con

tinuous wipe, slow
HI
Con

tinuous wipe, fast
To adjust the wiper sensitivity for the AUTO setting, twist
the control ring
.
Pull the lever
toward you to operate the
windshield washer.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information.