key INFINITI Q70 2014 Repair Manual

Black plate (211,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
.The Dual control mode cannot be
activated when the air conditioner is
in the front defrosting mode “
”.
Automatic upper ventilator system:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE01. Push the “CLIMATE”button to on.
2. Select the “Upper Vent”key and the
indicator on the screen will illuminate.
The air flow against the driver’s or
passenger’s upper body becomes gen-
tle.
In this mode, air from the center
ventilators flows both straight and
upward in order to control the cabin
temperature without blowing air di-
rectly on the occupants.
Distribution between straight and upward
flows is determined automatically by the
climate control system. If you prefer strong
air flow against your upper body, select
“Upper Vent” key to turn the indicator off.
. When the outside temperature de-
creases to approximately 148F
(−108C), the “Upper Vent” function
does not activate. The “Upper Vent”
function reactivates automatically when
the ambient temperature is 148F
(−108C) or more. Display Forest Air
®system setting screen:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0The
“Forest Air setting” screen will appear
when selecting the “Forest Air Setting” key.
For the details about the Forest Air
®
system setting operation, see “Setting
Forest Air®” (P.4-45).
Display Forest Air
®Information screen:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0The Forest Air®system information screen
will appear when selecting the “Forest Air
Info” key.
For details about the Forest Air
®system
information screen, see “Forest Air®sys-
tem Information” (P.4-46).
FOREST AIR®(if so equipped)Y51D-V-E01-4E3D2E2C-EF45-431E-A6F5-661AE504E2B8The Forest Air®system keeps the air inside
the vehicle clean using the automatic air
intake system and automatic ventilation.
The Forest Air
®system also makes the
inside of the vehicle more comfortable,
using a combination of the upper ventilator
and center ventilators at random.
*Forest Air
®is a trademark of Nissan Motor
Co., Ltd.
Main operationY51D-V-E01-2954897B-9BB4-4A02-9E95-B59CEABD9595Push the “”Forest button.
(The “
”and “AUTO” indicator light on the button will illuminate.)
When the following functions and sensors
are turned on, the Forest Air
®system
settings will activate.
. Breeze Mode
. Outside odor and exhaust gas detection
sensor
. Inside Air Quality sensor
. Auto humidity control
The fan speed and air flow is automatically
set to the AUTO position.
. The Forest Air
®system can be adjusted
and/or activated/deactivated for each
function. For details of The Forest Air
®
system settings, see later in this
section.
. When the “
”Forest button is
pushed while the air conditioner is
off, the air conditioner will automati-
cally activate.
. When the outside temperature de-
creases to approximately 328F (08C),
the outside odor and exhaust gas
detection sensor and auto humidity
control functions will not operate. The
system will not be reactivated auto-
matically even if the outside tempera-
ture reaches 328F (08C). To reactivate
Monitor, climate, audio, phone and voice recognition systems4-43
Condition:

Black plate (213,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
activate again.
Auto humidity control:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0The sensor installed on the upper side of
the windshield detects the temperature
and humidity of the passenger compart-
ment and the surface of the windshield,
and controls the humidity of the passenger
compartment to not be over-dry or moist
enough to fog the windows. Moreover, it
detects potential fog before formation on
the windows and operates to remove it.
. Push the “AUTO”or“
”Forest button
(The “AUTO” or“
”indicator light on
the button will illuminate and “AUTO
DEF” will appear on the display.)
. The “Auto humidity control” function
will not operate if the fan speed or a
vent outlet is manually adjusted.
(“AUTO DEF” will disappear from the
display.)
. When auto humidity control is turned
off while the Forest Air
®system is on,
turn off and on the Forest Air®system,
the auto humidity control will activate
again.
SAA2961
Setting Forest Air®Y51D-V-E01-B20BFEAC-8C6A-4E39-A45E-D5662260EE8D1. Push the “CLIMATE” button on the
instrument panel and turn the display
to the “CLIMATE mode” screen.
2. Select the “Forest Air Setting” key.
The Forest Air
®system settings screen
is displayed.
. No settings, except for auto humidity
control, are available unless the “
”
indicator light on the button illumi-
nates. Breeze Mode ON/OFF:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0When this item is turned to ON, the Breeze
Mode function will activate while the Forest
Air
®system operates.
Fan Speed Variance:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Set the Breeze Mode fluctuation effect.
Select the “Fan Speed Variance” key and
select the “High”or“Low” key setting of
the Breeze Mode fluctuation effect.
Setting the fan speed to “High”allows a
larger fluctuation change.
Outside/Inside Air Mix:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0This item allows the user to set priority
between the outside air circulation and air
recirculation modes.
Select the “Outside/Inside Air Mix” key
and use “
”or “”key to adjust
priority.
Greater priority will be given to the air
recirculation mode when the indicator is
closer to “
”, and the outside air
circulation mode when the indicator is
closer to “
”.
Auto Defogging Sensitivity:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0This item allows the user to set the timing
of the automatic defogging activation
function.
Monitor, climate, audio, phone and voice recognition systems4-45
Condition:

Black plate (214,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
4-46Monitor, climate, audio, phone and voice recognition systems
Select the“Auto Defogging Sensitivity” key
and select the “Slow”or“Fast” key.
When set to OFF, the automatic defogging
function will turn off.
SAA2962
Forest Air®system InformationY51D-V-E01-4618A1BE-158A-4C86-8C7C-8117F809EB75The present status of the Forest Air®
system operation and the conditions of
air inside and outside of the vehicle can be
checked.
Push the “CLIMATE” button on the instru-
ment panel and turn the display to the
“CLIMATE mode” screen and select the
“Forest Air Info” key.
1. Breeze Mode The animation image of the Breeze
Mode function is displayed.
2. The condition of outside and inside air The present condition of air inside and
outside the vehicle is indicated by
color.
Blue: The air is clean.
Orange: The air is not clean.
3. Outside air circulation/Air recirculation arrow
The air flow of the outside air circula-
tion and air recirculation functions is
indicated with an arrow.
Blue arrow: The air is clean.
Orange arrow: The air is not clean.
4. Auto humidity control status The condition of fog on the window is
displayed. When the window starts to
fog, the color turns white.
5. Outside air circulation/Air recirculation display
When the outside air circulation or air
recirculation mode is automatically
selected, either “
”or “”is
displayed. When the outside air circula-
tion or air recirculation mode is manu-
ally selected, either “
”or “”,
and “Manual” are displayed.
Condition:

Black plate (216,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
4-48Monitor, climate, audio, phone and voice recognition systems
The sensors*Aand*Bon the instrument
panel helps maintain a constant tempera-
ture. Do not put anything on or around this
sensor.
LINKING INTELLIGENT KEYGUID-BF69D1FC-1387-40CF-82CD-F392D72AD5A9The Climate control system settings can be
memorized for each Intelligent Key. For
more details, see “Setting memory func-
tion” (P.3-30).
IN-CABIN MICROFILTERY51D-V-E01-785030EE-08BA-43B6-A88C-00F044790061
Without Forest Air®systemY51D-V-E01-E979F6F5-2A36-4BC3-B97C-A8907FEC6CB7The climate control system is equipped
with an in-cabin microfilter which collects
dirt, pollen, dust, allergen (such as pollen,
tick shell), etc. To make sure that the air
conditioner heats, defogs, and ventilates
efficiently, replace the filter in accordance
with the maintenance schedule in the
INFINITI Service and Maintenance Guide.
To replace the filter, contact an INFINITI
retailer.
The filter should be replaced if the air flow
decreases significantly or if windows fog
up easily when operating the heater or air
conditioner.
With Forest Air®systemY51D-V-E01-AA38FB15-6E05-4F11-895E-EF3B0A2AE36EThe climate control system is equipped
with a natural grape seed polyphenol filter
which collects and neutralizes dirt, pollen,
dust, etc. To make sure that the air
conditioner heats, defogs and ventilates
efficiently, replace the filter in accordance
with the maintenance schedule in the
INFINITI Service and Maintenance Guide.
To replace the filter, contact an INFINITI
retailer.
The filter should be replaced if the air flow
decreases significantly or if windows fog
up easily when operating the heater or air
conditioner.
SERVICING CLIMATE CONTROLY51D-V-E01-88385B5B-392F-4C76-AE03-D5B56C8221ADThe climate control system in your INFINITI
is charged with a refrigerant designed with
the environment in mind. This refrigerant
will not harm the earth’s ozone layer.
However, special charging equipment and
lubricant are required when servicing your
INFINITI air conditioner. Using improper
refrigerants or lubricants will cause severe
damage to your climate control system.
(See “Capacities and recommended fuel/
lubricants” (P.9-2) for climate control sys-
tem refrigerant and lubricant recommenda- tions.)
Your INFINITI retailer will be able to service
your environmentally friendly climate con-
trol system.
WARNING
The system contains refrigerant under high
pressure. To avoid personal injury, any air
conditioner service should be done only by
an experienced technician with the proper
equipment.
Condition:

Black plate (231,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
Audio main operationY51D-V-E01-081E019A-6B6C-4BDF-A346-ADED33AE47C7
Head unit :GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0The auto loudness circuit enhances the low
and high frequency ranges automatically in
both radio reception and CD playback.
ON·OFF/Volume control:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Push the ignition switch to the ACC or ON
position, and then push the ON·OFF button
while the system is off to turn on the last
audio source, which was playing immedi-
ately before the system was turned off.
While the system is on, pushing the
ON·OFF button turns the system off.
Turn the VOL control knob to adjust the
volume.
Adjusting tone quality and speaker bal-
ance:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0To adjust Bass, Treble, Balance and Fade,
push the Audio control knob. When the
display shows the setting you want to
change (Bass, Treble, Balance and Fade),
rotate the Audio control knob to set the
desired setting. For the other setting
methods, see“How to use SETTING button”
(P.4-16).
This vehicle has some sound effect func-
tions as follows: .
Speed Sensitive Vol.
. Precision Phased Audio (if so equipped)
. BOSE
®Centerpoint®2 (if so equipped)
. BOSE®AudioPilot®2 (if so equipped)
. Surround effect (if so equipped)
For more details, see “How to use SETTING
button” (P.4-16).
Switching the display:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Pushing the DISC·AUX button will switch
the displays as follows:
. Models with navigation system
iPod
®/USB ?CD/DVD ?Bluetooth®
Audio ?iPod®/USB
. Models without navigation system
iPod
®/USB ?CD ?iPod®/USB
Linking Intelligent Key (models with navi-
gation system):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0The audio settings can be memorized for
each Intelligent Key. For more details, see
“Setting memory function” (P.3-30).
FM-AM-SAT radio operationY51D-V-E01-87805BD4-032C-4FD6-ADD3-E6C276E34F8AWhen the radio band select button is
pushed while the ignition switch is in the
ACC or ON position, the radio will come on
at the channel last played.
The last channel played will also come on when the ON·OFF button is pushed to ON.
If another audio source is playing when the
radio band select button is turned to ON,
the audio source will automatically be
turned off and the last radio channel
played will come on.
When the stereo broadcast signal is weak,
the radio will automatically change from
stereo to monaural reception.
radio (FM·AM) band select :GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Pushing the XM radio band select button
will change the band as follows:
AM
?FM1 ?FM2 ?AM
radio (XM) band select:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Pushing the XM radio band select button
will change the band as follows:
XM1 ?XM2 ?XM3 ?XM1
The satellite radio is not available in
Alaska, Hawaii and Guam.
TUNE (Tuning) :
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0. For AM and FM radio
Turn the radio TUNE knob for manual
tuning.
. For SiriusXM Satellite Radio
Turn the radio TUNE knob to seek
Monitor, climate, audio, phone and voice recognition systems4-63
Condition:

Black plate (232,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
4-64Monitor, climate, audio, phone and voice recognition systems
channels from all of the categories
when any category is not selected.
SEEK tuning/CATEGORY (CAT):GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0.For AM and FM radio
Push the SEEK button
orto
tune from low to high or high to low
frequencies and to stop at the next
broadcasting station.
. For SiriusXM Satellite Radio
Push the SEEK button
orto
tune to the first channel of the next or
previous category.
During satellite radio reception, the follow-
ing notices will be displayed under certain
conditions.
. NO SIGNAL (No signal is received while
the SAT tuner is connected.)
. OFF AIR (Broadcasting signed off)
. CHECK ANTENNA (Antenna connection
error)
. LOADING (When the initial setting is
performed)
. UPDATING (When the satellite radio
subscription is not active)
SCAN tuning:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Push the SCAN tuning button to tune from
low to high frequencies and stop at each
broadcasting station/channel for 5 sec-
onds. Pushing the button again during this
5 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
toStation memory operations:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE012 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for
SiriusXM Satellite Radio (6 each for XM1,
XM2 and XM3) and 6 stations can be set
for the AM band.
1. Choose the radio band using the radio band select button.
2. Tune to the desired station/channel
using the
, SCAN button or the
radio TUNE knob.
3. Push and hold the desired station
preset button
tountil the radio
mutes.
4. The station indicator will then come on and the sound will resume. Memorizing is now complete.
5. Other buttons can be set in the same manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
Menu (SiriusXM Satellite Radio) (models
with navigation system):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0When the “Menu”key on the display is
selected while the SiriusXM Satellite Radio
is being played, the menu list will be
displayed.
The following items are available.
. Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
stored as the new preset.
. Customize Channel List
Selects specific channels to skip while
using the TUNE, SEEK/CATEGORY or
Menu-Categories feature.
. Favorite Artists & Songs
Stores the current artist or song that is
being played. Touch the “Alert”key to
be reminded when the stored artist or
Condition:

Black plate (233,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
song is playing on a station while
listening to SiriusXM Satellite Radio.
. Categories
Selecting a category will go to the first
channel in that category as defined by
SiriusXM Satellite Radio.
. Direct Tune
Inputs the channel number by using a
keypad.
Text (models without navigation system):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0When the “Text”key is selected with the
INFINITI controller on the display and then
the ENTER button is pushed while the
satellite radio is being played, the text
information listed below will be displayed
on the screen.
. CH Name
. Category
. Name
. Title
. Other
Compact Disc (CD) player operationY51D-V-E01-A497E71C-C82B-4B07-9E59-CFE21EBD2F73Push the ignition switch to the ACC or ON
position and insert the Compact Disc (CD)
into the slot with the label side facing up.
The CD will be guided automatically into
the slot and start playing.
After loading the CD, the number of tracks
on the CD and the play time will appear on
the display.
If the radio is already operating, it will
automatically turn off and the CD will play.
If the system has been turned off while the
CD was playing, pushing the ON·OFF
button will start the CD.
Do not use 3.1 in (8 cm) discs.
PLAY:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0When the DISC·AUX (CD play) button is
pushed with the system off and the CD
loaded, the system will turn on and the CD
will start to play.
When the DISC·AUX button is pushed with
the CD loaded and the radio playing, the
radio will automatically be turned off and
the CD will start to play. Menu (models with navigation system):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0When the
“Menu”key on the display is
selected while the CD is being played, the
menu screen will be displayed. The follow-
ing menu options are available.
. Folder List (for CD with compressed
audio files)
Displays the folder list.
. Track List
Displays the track list.
. Play Mode
Select a play mode from the following
items.
— Normal
— 1 Folder Repeat (for CD with com-
pressed audio files)
— 1 Track Repeat
— 1 Disc Random
— 1 Folder Random (for CD with
compressed audio files)
Text (models without navigation system):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0When the “Text”key is selected in the
screen using the INFINITI controller and
then the ENTER button is pushed while the
CD is being played, the music information
below will be displayed on the screen.
Monitor, climate, audio, phone and voice recognition systems4-65
Condition:

Black plate (235,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
CAUTION
.Only operate the DVD while the vehicle
engine is running. Operating the DVD for
extended periods of time with the
engine OFF can discharge the vehicle
battery.
. Do not allow the system to get wet.
Excessive moisture such as spilled
liquids may cause the system to mal-
function.
. While playing VIDEO-CD media, this DVD
player does not guarantee complete
functionality of all VIDEO-CD formats.
Display settingsY51D-V-E01-53F4FBE0-9CD0-405C-B003-65030AE4A681To adjust the front display mode, push the
SETTING button while the DVD is being
played, select the “Others”key and then
select the “Display”key.
To adjust the display ON/OFF, brightness,
tint, color and contrast, select the “Display
Adjustment” key and then select each key.
Then you can adjust each item using the
INFINITI controller. After changes have
been made push the BACK button to save
the setting.
SAA2497
Playing a DVDY51D-V-E01-11340633-A2C1-4A0D-98E6-9849C1DE24D2
DISC·AUX button:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Park the vehicle in a safe location for the
front seat occupants to operate the DVD
drive while watching the images.
Push the DISC·AUX button on the instru-
ment panel and turn the display to the DVD
mode.
When a DVD is loaded, it will be replayed
automatically.
The operation screen will be turned on
when the DISC·AUX button located on the
instrument panel is pushed while a DVD is
being played, and it will turn off auto- matically after a period of time. To turn it
on again, push the DISC·AUX button again.
DVD operation keys:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0When the DVD is playing without the
operation screen being shown, you may
use the touch screen to select items from
the displayed video. You may also use the
INFINITI controller to select an item from
the displayed video. When the operation
screen is being shown, use the INFINITI
controller or touch screen to select an item
from the displayed menus.
PAUSE:
Select the “
”key to pause the DVD. To
resume playing the DVD, use the “PLAY”
key.
PLAY:
Select the “
”key to start playing the
DVD, for example, after pausing the DVD.
STOP:
Select the “
”key to stop playing the
DVD.
Monitor, climate, audio, phone and voice recognition systems4-67
Condition:

Black plate (236,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
4-68Monitor, climate, audio, phone and voice recognition systems
/Next/Previous Chapter:
Select the “
”or “”key to skip the
chapter(s) of the disc forward/backward.
The chapters will advance/go back the
number of times this key is selected.
/Commercial Skip:
This function is only for DVD-VIDEO, DVD-
VR. Select the “
”or “”key to skip
forward or backwards by the set amount as
defined in the DVD Settings menu.
Top Menu:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0When the “Top Menu” key is selected in
the screen while a DVD is being played, the
top menu specific to each disc will be
displayed. For details, see the instructions
on the disc.
SAA2498
Example
DVD settingsY51D-V-E01-7632A88E-BE7F-42D4-940A-0741B878503ASelect the “Settings”key to adjust the
following settings.
Key (DVD-VIDEO):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Keys for the DVD menu operation are
displayed.
: Move the cursor to select a DVD menu.
Enter: Enter the selected menu.
Move: Change the display location by moving the operation key.
Back: Return to the previous screen.
Hide: Hide the operation key.
Title Menu (DVD-VIDEO):GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Some menus specific to each disc will be
shown. For details, see the instructions on
the disc.
Title Search (DVD-VIDEO, DVD-VR):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0The scene with the specified title will be
displayed each time the “+”side or “−”
side is selected.
Group Search (VIDEO CD):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0A scene in the specified group will be
displayed each time the “+”side or “−”
side is selected.
10 Key Search (DVD-VIDEO, VIDEO-CD,CD-
DA, DVD-VR):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Select the “10 Key Search” key to open the
number entry screen. Input the number to
be searched and select the “OK”key. The
specified Title/Chapter or Group/Track will
be played.
Select No. (VIDEO-CD):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Select the “Select No.” key to open the
number entry screen. Input the number to
be searched and select the “OK”key. The
specified scene will be played.
Condition:

Black plate (237,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
Angle (DVD-VIDEO):GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0If the DVD contains different angles (such
as moving images), the current image
angle can be switched to another one.
Select the“Angle”key. The angle will
change each time the “+”side or “−”side
is selected.
Angle Mark (DVD-VIDEO):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0When this item is turned on, an angle mark
will be shown on the bottom of the screen
if the scene can be seen from a different
angle.
Menu Skip (DVD-VIDEO):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0DVD menus are automatically configured
and the contents will be played directly
when the “Menu Skip” key is turned on.
Note that some discs may not be played
directly even if this item is turned on.
CM Skip (DVD-VIDEO):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Select the “CM Skip” key. Choose the
setting time from 15, 30 or 60 seconds by
selecting the “+”side or “−”side.
DRC (DVD-VIDEO, DVD-VR):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0DRC (Dynamic Range Compression) auto-
matically adjusts the soundtrack volume
level to maintain a more even sound to the
speakers. DVD Language (DVD-VIDEO, VIDEO-CD):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Select the
“DVD Language” key to open the
number entry screen. Input the number
corresponding to the preferred language
and select the “OK”key. The DVD top menu
language will be changed to the one
specified.
Display:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0To adjust the image quality of the screen,
select the preferred adjustment items.
Audio:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Select the preferred language for audio.
Subtitle (DVD-VIDEO, DVD-VR):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Select the preferred language for subtitles.
Display Mode (DVD-VIDEO, VIDEO-CD, DVD-
VR):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Select from the “Full”,“Wide”, “Normal” or
“Cinema” modes.
Title List (DVD-VR):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Select the preferred title from the list.
Play Mode:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Select the preferred play mode.
PG/PL Mode (DVD-VR):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Select the “PG”or“PL” mode.
SAA2963
USB INPUT OPERATIONY51D-V-E01-3E714A7F-A0E3-4C4C-9CA0-B2922C07F381
Audio main operationY51D-V-E01-A1CC1578-7D9C-45BB-A45E-F8FED83A8FE3Open the console lid and connect a USB
memory. Then, push the DISC·AUX button
repeatedly to switch to the USB memory
mode.
If the system has been turned off while the
USB memory was playing, pushing the
ON·OFF/VOL control knob will start the USB
memory.
Monitor, climate, audio, phone and voice recognition systems4-69
Condition: