steering wheel INFINITI Q70 2017 Quick Reference Guide

2
Cockpit Overview
1 Dynamic Driver Assistance (DDA) switch (if so equipped)
2 Intelligent Cruise Control (ICC) switches (if so equipped)
3 Wiper and washer switch
4 Trip computer controls and reset button (behind the steering wheel)
5 Vehicle information display
6 Paddle shifters
7 Vehicle information display brightness controls (behind the steering w\
heel)
8 Combined turn signal / headlight control switch
9 Menu control switches and audio control switches
10 Bluetooth® control switches and audio control switches
2586986_17a_Q70_US_pQRG_090916.indd 29/9/16 4:04 PM

4
Instrument Panel
1 Multi-function control touch-screen / RearView Monitor display / Aroun d View® Monitor (AVM)
display (if so equipped)
2 Climate control panel
• Heater and air conditioning (automatic)
• Front/Rear window defroster
3 Navigation control panel
4 Audio control panel
5 Shift lever
6 Push-button ignition system (behind the steering wheel)
7 Adaptive Front Lighting system switch (behind the steering wheel)
8 Tilt/Telescopic steering wheel switch (behind the steering wheel)
9 Parking brake
10 Hood latch release
11 Lower switch bank
• Vehicle Dynamic Control (VDC) OFF switch • Trunk release • Rear sunshade switch (if so equipped) •
Warning Systems switch (if so equipped) • Heated steering wheel switch (if so equipped)
•


Backup Collision Intervention on/off switch
(if so equipped)
2586986_17a_Q70_US_pQRG_090916.indd 49/9/16 4:04 PM

14
Move the lever 1 up or down to one of
the following positions to operate the
windshield wipers:
MIST
One sweep operation
OFF



Wipers are OFF
AUTO



Speed-sensing and rain-sensing
automatic wipe
LO



Continuous wipe, slow
HI
Continuous wipe, fast
To adjust the wiper sensitivity for the AUTO
setting, twist the control ring
2.
Pull the lever
1 toward you operate the
windshield washer.
To turn the rain-sensing automatic wiper system
off, push up the lever to the OFF position, or pull
down the lever to the LO or HI position.
Wiper and Washer Switch
1
2
SYSTEM OPERATING TIPS •
The interior of the vehicle should be as quiet as possible.
•


Speak naturally. Speaking too fast, too slow, too soft, or
too loud makes voice recognition more difficult.
•


Confirm that the correct voice commands are
being used. Glance at the screen to see the currently
available commands.
USING THE VOICE RECOGNITION SYSTEM
•


Press
the
button 1 on the steering wheel, and a list
of commands will appear on the screen.
•


After the tone sounds, speak the command.
•


To skip the voice prompt and give the command
immediately, press the button 1 on the steering
wheel to interrupt the system. Speak the next command
after the tone sounds.
•


To cancel the command, press and hold the button 1 on the steering wheel.
Please see your Owner’s Manual for important safety information, syst\
em
limitations, and additional operating and feature information.
Voice Recognition

1
PULLING UP THE WIPER ARM
The wiper arm should be in the UP
position when replacing the wiper.
• With the shift lever in the P (PARK)
position, place the ignition switch


in the OFF position.
•


Within 1 minute, push the wiper
switch to the MIST

position twice.
The wiper operation stops in mid-
operation and the wiper arm can
be pulled up.
•


To return the wiper arm, place
the wiper arm in the DOWN
position and operate the wiper
switch once.
Please see your Owner’s Manual for important safety information, syst\
em limitations, and additional operating and
feature information.
2586986_17a_Q70_US_pQRG_090916.indd 149/9/16 4:05 PM