INFINITI Q70 2018 Quick Reference Guide
Manufacturer: INFINITI, Model Year: 2018, Model line: Q70, Model: INFINITI Q70 2018Pages: 20, PDF Size: 0.84 MB
Page 11 of 20
8
5
6
Cruise Control
3
2
1
4
3
2 1
CONVENTIONAL CRUISE CONTROL (if so equipped)
SETTING A CRUISING SPEED
•
Press the CRUISE ON/OFF switch 1 to turn on the system.
•
With the
vehicle at the desired speed, push down the switch
2 to COAST/SET to
enable cruise control.
•
The cruising speed c
an be adjusted to a higher or lower speed by toggling the
control switch
2 up or down.
CANCELING THE PRESET SPEED
•
Push the CANCEL switch
3 or tap the brake pedal.
INTELLIGENT CRUISE CONTROL (ICC) (if so equipped)
The ICC system is designed to maintain a selected distance from the vehicle in front of
you and reduce the speed to match a slower vehicle ahead.
•
T
o increase the distance to the vehicle ahead to be maintained by the ICC system,
push the distance switch
4 until the display shows the desired set distance, which
is shown by the number of lines on the set distance indicator
5.
•
When a
vehicle is detected ahead, a car icon will illuminate on the vehicle ahead
detection indicator
6 and your vehicle will reduce the speed to match the
slower vehicle.
To use Conventional (fixed speed) Cruise Control mode (if so equipped):
•
While cruise c
ontrol is off, push and hold the CRUISE ON/OFF switch
1 for more
than 1.5 seconds. The CRUISE indicator light will illuminate.
•
A
ccelerate to the desired speed.
•
Push the swit
ch
2 down toward COAST/SET and release it. The SET indicator
light will illuminate.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
INTELLIGENT CRUISE CONTROL (ICC) (if so equipped)
2917603_18a_Q70_US_pQRG_051717.indd 85/17/17 2:25 PM
Page 12 of 20
9
Navigation System (if so equipped)
Use the Infiniti controller 1 and ENTER button 2 to navigate through the center display screen.
•
Press the
BACK button 3 to return to the previous screen.
•
Press the MAP button
4 to display the map.
SETTING A ROUTE
To set a route, first ensure that the correct region is selected on the touch-screen.
1.
Pr
ess the NAVI button
5 on the Infiniti controller.
2.
T
ouch the “Destination Menu” key
6 on the display.
3
.
Select the pr
eferred destination setting method.
4.
E
nter the address number, street name, and city as prompted by the screen.
CANCELING A ROUTE
1. Pr
ess the NAVI button
5 on the Infiniti controller.
2.
T
ouch the “Cancel Route” key
7.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information.
6
7
1 2
3
4
5
2917603_18a_Q70_US_pQRG_051717.indd 95/17/17 2:25 PM
Page 13 of 20
10
POWER SEAT ADJUSTMENTS
•
T
o slide the seat forward or
backward, push the
switch
1 forward or backward.
•
T
o recline the seatback, push the
switch 2 forward
or backward.
SEAT LIFTER
•
T
o adjust the angle of the front portion or height of the seat,
push the front or rear end of the
switch 1 up or down.
POWER LUMBAR SUPPORT
•
T
o adjust the seat lumbar support, push the front or back end of
the
switch 3.
AUTOMATIC ENTRY/
EXIT FUNCTION
•
T
o turn on and off the automatic
entry/exit function, with the
vehicle in P (Park) and the
ignition switch in the OFF
position, press and hold the SET switch
4 for more than
10 seconds.
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
Seat Adjustments
4
3 2 1
ROLL DOWN FEATURE
The windows can be opened remotely using your
Infiniti Intelligent Key.
•
Pr
ess and hold the unlock button
1 to
open the windows and moonroof (if so
equipped) remotely.
•
I
f the unlock button
1 is released, the
windows will stop. To resume the roll
down feature, press and hold the unlock
button
1 again.
Please see your Owner’s Manual for important safety
information, system limitations, and additional operating and
feature information.
Infiniti Intelligent Key System
1
Fuel-filler Door
To open the fuel-filler door, unlock the
vehicle and gently push the rearward
side of the fuel-filler door.
Please see your Owner’s Manual for important
safety information, system limitations, and additional
operating and feature information.
2917603_18a_Q70_US_pQRG_051717.indd 105/17/17 2:26 PM
Page 14 of 20
11
To change the settings for the door locking and
unlocking system, press the SETTING button
2, select the “Others” key, and select the “Comfort”
key on the display.
•
T
o unlock all doors by touching the
inside of the door handle, select
“Selective Door Unlock”.
•
T
o disable unlocking by touching the inside of the door handle, select
“Touch Sensitive Door Sensor”.
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
USB Connection Port
• The USB ports 1 are
located in the center
console under the armrest.
Compatible audio and
video files stored on a
USB device can be played
through the vehicle’s audio
system and front display.
Use these switches to adjust
the brightness of the vehicle
information display.
•
T
o increase the brightness,
push the upper switch
1.
•
T
o decrease the brightness,
push the lower switch
2.
Please see your Owner’s Manual for
important safety information, system
limitations, and additional operating and
feature information.
Brightness Control Switches
1
2
To use the door handles to lock and
unlock your vehicle, make sure the
Intelligent Key is with you (that is, in
your pocket or purse).
•
Push the door
handle request
switch
1 to unlock the
corresponding door.
•
Push the door
handle request
switch
1 again within 1 minute to
unlock the rest of the doors.
•
T
o lock the vehicle, push either door
handle request switch
1 once.
Locking and Unlocking your
Vehicle via the Door Handle
1
2
Please see your Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
1
2917603_18a_Q70_US_pQRG_051717.indd 115/17/17 2:26 PM
Page 15 of 20
12
6
7
Exterior Light Operation Windows
2
1 5
3
4
1
2
1 OFF position
2 Automatic headlight mode ON position (headlights switch on/off
automatically depending on ambient light conditions/daytime running
light system)
3 Side lights, license plate lights and combination meter lighting ON position
4 Headlight ON position
5 Front fog light switch
6 Push the headlight switch forward for the high beams.
7 Pull the headlight switch rearward to flash the high beams.
For normal headlight operation, leave the exterior light switch in the AUTO
position
2.
Please see your Owner’s Manual for important safety information, system limitations, and additional
operating and feature information.
All power windows can be operated through the main
switch on the driver’s door.
1 Power windows open/close
2 Disable rear passenger window operation by
rear passengers
Please see your Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
2917603_18a_Q70_US_pQRG_051717.indd 125/17/17 2:27 PM
Page 16 of 20
13
When the button 1 is
pressed, the following modes
will appear on the vehicle
information display
2:
Trip Computer
3
1
2
• MPG
•
MPG/MPH
•
TIME/MILES
•
RANGE • OUTSIDE TEMP
•
SETTING
•
WARNING
To reset the elapsed time/miles, press and hold the
button 3 for more than 1 second. Both elapsed
time/miles will reset at the same time.
Please see your Owner’s Manual for important safety information,
system limitations, and additional operating and feature information.
3
To adjust the time and the appearance of the clock on the display:
Pr
ess the SETTING button
1 on the control panel.
Locate and touch the “Clock” key to adjust “On-Screen Clock”, “Daylight Savings Time”,
“Clock Format (24h)”, and “Time Zone” on the display.
The time can be adjusted through “Offset Adjustment”
2 by adjusting the minutes
and/or hours forward or backward. The current clock time can be set up to a
difference of 12 hours and 59 minutes.
ANALOG CLOCK
To set the clock forward, press the button
3.
To set the clock backward, press the button
4.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
Clock Set/Adjustment
2
4
1
2917603_18a_Q70_US_pQRG_051717.indd 135/17/17 2:27 PM
Page 17 of 20
14
Move the lever 1 up or down to one of
the following positions to operate the
windshield wipers:
MIST
One sw
eep operation
OFF
Wipers ar
e OFF
AUTO
R
ain-sensing automatic wipe
LO
C
ontinuous wipe, slow
HI
C
ontinuous wipe, fast
To adjust the wiper sensitivity for the AUTO
setting, twist the control ring
2.
Pull the lever
1 toward you operate the
windshield washer.
To turn the rain-sensing automatic wiper
system off, push up the lever to the OFF
position, or pull down the lever to the LO or
HI position.
Wiper and Washer Switch
1
2
SYSTEM OPERATING TIPS •
The in terior of the vehicle should be as quiet
as possible.
•
Speak
naturally. Speaking too fast, too slow, too
soft, or too loud makes voice recognition
more difficult.
•
C
onfirm that the correct voice commands are
being used. Glance at the screen to see the currently
available commands.
USING THE VOICE RECOGNITION SYSTEM
•
Press the
button 1 on the steering wheel, and a
list of commands will appear on the screen.
•
A
fter the tone sounds, speak the command.
•
T
o skip the voice prompt and give the command
immediately, press the
button 1 on the steering
wheel to interrupt the system. Speak the next
command after the tone sounds.
•
T
o cancel the command, press and hold the
button 1 on the steering wheel.
Please see your Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
Voice Recognition
1
PULLING UP THE WIPER ARM
The wiper arm should be in the UP
position when replacing the wiper.
•
With the shift le
ver in the
P (PARK) position, place
the ignition switch in the
OFF position.
•
Within 1 minut
e, push the
wiper switch to the MIST
position twice. The wiper
operation stops in mid-
operation and the wiper arm
can be pulled up.
•
T
o return the wiper arm, place
the wiper arm in the DOWN
position and operate the wiper
switch once.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating
and feature information.
2917603_18a_Q70_US_pQRG_051717.indd 145/17/17 2:27 PM
Page 18 of 20
15
Infiniti InTouch™ Services (if so equipped)
Infiniti InTouch ™ Services combine personalized convenience settings and personal
security features to compliment the Total Ownership Experience®. For more details on
Infiniti InTouch Services or to enroll your vehicle, please visit
usa.infinitiintouch.com or call 1-855-444-7244. Available services include, but are not limited to: •
A utomatic Collision Notification
•
Alarm Notification
•
Maintenance Alert
•
Scheduled Main
tenance Notification
•
Report Stolen Vehicle
•
Emergency Call
•
Enhanced Roadside Assistance
•
My Schedule
•
Infiniti Personal Assistant
•
Destination Send-to-Vehicle
•
Connected Search
•
Drive Zone
•
Maximum Speed Alert
•
Mobile Information Service
•
Valet Alert
INFINITI INTOUCH SERVICES ENROLLMENT
1.
Cr
eate an Infiniti Owner Portal account.
(https://owners.infinitiusa.com/iowners/)
2.
F
rom within your Infiniti Owner Portal account,
enroll in Infiniti InTouch Services.
3
.
Do
wnload the Infiniti InTouch Services companion
app from the App store and login using your Infiniti
Owner Portal ID and Password.
To access Infiniti InTouch Services:
1 Press the INFO button on the Infiniti controller.
2 Select the “InTouch Services” key on the display.
2
In case of an emergency, press the in-
vehicle telematics SOS button
3, located
above and in front of the rearview mirror.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
3
1
2917603_18a_Q70_US_pQRG_051717.indd 155/17/17 2:27 PM
Page 19 of 20
2917603_18a_Q70_US_pQRG_051717.indd 165/17/17 2:27 PM
Memo
Page 20 of 20
To view detailed instructional videos, go to
www.infinitiownersinfo.mobi/2018/q70 or snap this barcode with an appropriate barcode reader.
Printing June 2017
QR18EA 0Y51U0
Printed in USA
This Quick Reference Guide is intended to provide an overview of some of
the unique features of your new vehicle. Please see your Owner’s Manual
for important safety information and system operation limitations. Features and equipment in your vehicle may vary depending on model,
trim level, options selected, order, date of production, region or availability.
Therefore, you may find information about features or equipment that are not included or installed on your vehicle.
All information, specifications and illustrations in this Quick Reference Guide are those in effect at the time of printing. INFINITI reserves the right to change specifications, performance, design or component
suppliers without notice and without obligation. From time to time, INFINITI may update or revise this Quick Reference Guide to provide
owners with the most accurate information currently available. Please
carefully read and retain, with this Quick Reference Guide, all revision updates sent to you by INFINITI to ensure you have access to accurate
and up-to-date information regarding your vehicle. Current versions of vehicle Quick Reference Guides, Owner’s Manuals and any updates
can also be found in the Owner section of the INFINITI website at
https://owners.infinitiusa.com/iowners/navigation/manualsAndGuides.
If you have questions concerning any information in your Owner’s Manual,
contact INFINITI Client Support (see contact information listed above).
2917603_18a_Q70_US_pQRG_051717.indd 15/17/17 2:24 PM