ECO mode INFINITI Q70 2018 Quick Reference Guide

8
5
6
Cruise Control
3
2
1
4
3
2 1
CONVENTIONAL CRUISE CONTROL (if so equipped)
SETTING A CRUISING SPEED
•


Press the CRUISE ON/OFF switch 1 to turn on the system.
•


With the

vehicle at the desired speed, push down the switch
2 to COAST/SET to
enable cruise control.
•


The cruising speed c

an be adjusted to a higher or lower speed by toggling the
control switch
2 up or down.
CANCELING THE PRESET SPEED
•


Push the CANCEL switch
3 or tap the brake pedal.
INTELLIGENT CRUISE CONTROL (ICC) (if so equipped)
The ICC system is designed to maintain a selected distance from the vehicle in front of
you and reduce the speed to match a slower vehicle ahead.
•


T

o increase the distance to the vehicle ahead to be maintained by the ICC system,
push the distance switch
4 until the display shows the desired set distance, which
is shown by the number of lines on the set distance indicator
5.
•


When a

vehicle is detected ahead, a car icon will illuminate on the vehicle ahead
detection indicator
6 and your vehicle will reduce the speed to match the
slower vehicle.
To use Conventional (fixed speed) Cruise Control mode (if so equipped):
•


While cruise c

ontrol is off, push and hold the CRUISE ON/OFF switch
1 for more
than 1.5 seconds. The CRUISE indicator light will illuminate.
•


A

ccelerate to the desired speed.
•


Push the swit

ch
2 down toward COAST/SET and release it. The SET indicator
light will illuminate.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
INTELLIGENT CRUISE CONTROL (ICC) (if so equipped)
2917603_18a_Q70_US_pQRG_051717.indd 85/17/17 2:25 PM

13
When the button 1 is
pressed, the following modes
will appear on the vehicle
information display
2:
Trip Computer
3
1
2
• MPG
•

MPG/MPH
•

TIME/MILES
•

RANGE • OUTSIDE TEMP
•

SETTING
•

WARNING
To reset the elapsed time/miles, press and hold the
button 3 for more than 1 second. Both elapsed
time/miles will reset at the same time.
Please see your Owner’s Manual for important safety information,
system limitations, and additional operating and feature information.
3
To adjust the time and the appearance of the clock on the display:
Pr

ess the SETTING button
1 on the control panel.
Locate and touch the “Clock” key to adjust “On-Screen Clock”, “Daylight Savings Time”,
“Clock Format (24h)”, and “Time Zone” on the display.
The time can be adjusted through “Offset Adjustment”
2 by adjusting the minutes
and/or hours forward or backward. The current clock time can be set up to a
difference of 12 hours and 59 minutes.
ANALOG CLOCK
To set the clock forward, press the button
3.
To set the clock backward, press the button
4.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
Clock Set/Adjustment

2
4
1
2917603_18a_Q70_US_pQRG_051717.indd 135/17/17 2:27 PM