homelink INFINITI Q70 2019 Owner's Manual

JVC1096X
1. Rear sunshade (if so equipped) (P.2-55)
2. Rear spot light (if so equipped) (P.2-58)
3. Coat hooks (P.2-50)
4. Rear personal light (if so equipped)(P.2-57)
5. Sun visors (P.3-25) 6. Microphone
— Bluetooth®Hands-Free Phone sys-
tem*
7. Power windows (P.2-51)
8. Moonroof switch (P.2-54)
9. Map light (P.2-57) — Active noise cancellation system
(P.5-128)
— SOS call switch* (if so equipped)
10. Sunglasses holder (P.2-48)
11. Inside rearview mirror — Operation (P.3-25)
— HomeLink
®(P.2-60)
12. Trunk pass-through/Rear armrest (P.1-4)
13. Rear cup holders (P.2-47)/Seat heater switch (if so equipped) (P.2-41)
14. Rear pocket (if so equipped) (P.2-50) or power outlet (if so equipped) (P.2-46)
15. Console box — Power outlet (P.2-46)
— USB connection port*
— Auxiliary input jack*
16. Front cup holders (P.2-47)
*: Refer to the INFINITI InTouch
TMOwn-
er’s Manual.
Illustrated table of contents0-5
PASSENGER COMPARTMENT

Rear pocket (if so equipped) ................................. 2-50
Coat hooks ................................................................. 2-50
Trunk hooks ................................................................ 2-51
Windows ........................................................................\
... 2-51
Power windows ......................................................... 2-51
Moonroof ........................................................................\
.. 2-54 Power moonroof ....................................................... 2-54
Rear sunshade (if so equipped) ................................... 2-55
Welcome light .................................................................. 2-56 Battery saver system ............................................... 2-57
Interior lights .................................................................... 2-57
Map lights ................................................................... 2-57
Personal lights (if so equipped) ............................. 2-57
Rear spot lights (if so equipped) ........................... 2-58
Interior light control switch .................................... 2-58 Vanity mirror lights ........................................................ 2-59
Trunk light ........................................................................\
2-59
HomeLink
®Universal Transceiver ............................ 2-60
Programming HomeLink®.................................... 2-60
Programming HomeLink®for Canadian
customers and gate openers ............................... 2-62
Operating the HomeLink
®
Universal Transceiver ............................................. 2-62
Programming troubleshooting ............................ 2-62
Clearing the programmed information ............. 2-63
Reprogramming a single
HomeLink
®button .................................................. 2-63
If your vehicle is stolen .......................................... 2-63

2-60Instruments and controls
The HomeLink®Universal Transceiver pro-
vides a convenient way to consolidate the
functions of up to three individual hand-held
transmitters into one built-in device.
HomeLink
®Universal Transceiver:
. Will operate most Radio Frequency (RF)
devices such as garage doors, gates,
home and office lighting, entry door
locks and security systems.
. Is powered by your vehicle’s battery. No
separate batteries are required. If the
vehicle’s battery is discharged or is
disconnected, HomeLink
®will retain all
programming.
When the HomeLink
®Universal Transceiver
is programmed, retain the original trans-
mitter for future programming procedures
(Example: new vehicle purchases). Upon
sale of the vehicle, the programmed
HomeLink
®Universal Transceiver buttons
should be erased for security purposes. For
additional information, refer to “Program-
ming HomeLink
®” (P.2-60).
WARNING
. Do not use the HomeLink®Universal
Transceiver with any garage door
opener that lacks safety stop and
reverse features as required by fed-
eral safety standards. (These stan- dards became effective for opener
models manufactured after April 1,
1982). A garage door opener which
cannot detect an object in the path of
a closing garage door and then auto-
matically stop and reverse, does not
meet current federal safety stan-
dards. Using a garage door opener
without these features increases the
risk of serious injury or death.
. During the programming procedure
your garage door or security gate will
open and close (if the transmitter is
within range). Make sure that people
or objects are clear of the garage
door, gate, etc. that you are pro-
gramming.
. Your vehicle’s engine should be
turned off while programming the
HomeLink
®Universal Transceiver.
Do not breathe exhaust gases; they
contain colorless and odorless carbon
monoxide. Carbon monoxide is dan-
gerous. It can cause unconsciousness
or death.
PROGRAMMING HomeLink®
If you have any questions or are having
difficulty programming your HomeLink®
buttons, refer to the HomeLink®web site
at: www.homelink.com or call 1-800-355-
3515.
NOTE:
It is also recommended that a new battery
be placed in the hand-held transmitter of
the device being programmed to
HomeLink
®for quicker programming and
accurate transmission of the radio-fre-
quency.
1. Position the end of your hand-held transmitter 1-3 in (26-76 mm) away
from the HomeLink
®surface, keeping
the HomeLink®indicator lightin view.
HomeLink®UNIVERSAL TRANSCEIVER

JVI0428X
2. Using both hands, simultaneously pressand hold the desired HomeLink®button
and handheld transmitter button. DO
NOT release until the HomeLink
®indi-
cator lightflashes slowly and then
rapidly. When the indicator light flashes
rapidly, both buttons may be released.
(The rapid flashing indicates successful
programming.)
NOTE:
Some devices to be programmed may
require you to replace Step 2 with the
cycling procedure noted in the “Pro-
gramming HomeLink
®for Canadian cus-
tomers and gate openers” (P.2-62).
JVI0429X
3. Press and hold the programmed HomeLink®button and observe the in-
dicator light.
.If the indicator lightis solid/con-
tinuous, programming is complete
and your device should activate when
the HomeLink
®button is pressed and
released.
.If the indicator lightblinks rapidly
for two seconds and then turns to a
solid/continuous light, continue with
Steps 4-6 for a rolling code device. A
second person may make the follow-
ing steps easier. Use a ladder or other
device. Do not stand on your vehicle
to perform the next steps. 4. At the receiver located on the garage
door opener motor in the garage, locate
the “learn” or “smart” button (the name
and color of the button may vary by
manufacturer but it is usually located
near where the hanging antenna wire is
attached to the unit). If there is difficulty
locating the button, reference the garage
door opener’s manual.
5. Press and release the “learn” or “smart” button.
NOTE:
Once the button is pressed, you have
approximately 30 seconds to initiate the
next step.
6. Return to the vehicle and firmly press and hold the programmed HomeLink
®
button for two seconds and release.
Repeat the “press/hold/release” se-
quence up to 3 times to complete the
programming process. HomeLink
®
should now activate your rolling code
equipped device.
7. If you have any questions or are having difficulty programming your HomeLink
®
buttons, refer to the HomeLink®web
site at: www.homelink.com or call 1-
800-355-3515.
Instruments and controls2-61

2-62Instruments and controls
PROGRAMMING HomeLink®FOR
CANADIAN CUSTOMERS AND
GATE OPENERS
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission –
which may not be long enough for
HomeLink
®to pick up the signal during
programming. Similar to this Canadian law,
some U.S. gate operators are designed to
“time-out” in the same manner.
If you live in Canada or you are having
difficulties programming a gate operator or
garage door opener by using the “Program-
ming HomeLink
®” procedures, replace “Pro-
gramming HomeLink®” Step 2 with the
following:
NOTE:
When programming a garage door opener,
etc., unplug the device during the “cycling”
process to prevent possible damage to the
garage door opener components.
Step 2: Using both hands, simultaneously
press and hold the desired HomeLink
®
button and the hand-held transmitter but-
ton. During programming, your hand-held
transmitter may automatically stop trans-
mitting. Continue to press and hold the
desired HomeLink
®button while you press
and re-press (“cycle”) your hand-held trans- mitter every two seconds until the frequency
signal has been learned. The HomeLink
®
indicator light will flash slowly and then
rapidly after several seconds upon success-
ful programming.
DO NOTrelease until the
HomeLink
®indicator light flashes slowly and
then rapidly. When the indicator light flashes
rapidly, both buttons may be released. The
rapid flashing indicates successful program-
ming.
Proceed with “Programming HomeLink
®”
step 3 to complete.
Remember to plug the device back in when
programming is completed.
OPERATING THE HomeLink®
UNIVERSAL TRANSCEIVER
The HomeLink®Universal Transceiver, after
it is programmed, can be used to activate the
programmed device. To operate, simply
press and release the appropriate pro-
grammed HomeLink
®Universal Transceiver
button. The amber indicator light will illumi-
nate while the signal is being transmitted.
For convenience, the hand-held transmitter
of the device may also be used at any time.
PROGRAMMING TROUBLE-
SHOOTING
If the HomeLink®does not quickly learn the
hand-held transmitter information:
. replace the hand-held transmitter bat-
teries with new batteries.
. position the hand-held transmitter with
its battery area facing away from the
HomeLink
®surface.
. press and hold both the HomeLink®and
hand-held transmitter buttons without
interruption.
. position the hand-held transmitter 1-3 in
(26-76 mm) away from the HomeLink
®
surface. Hold the transmitter in that
position for up to 15 seconds. If
HomeLink
®is not programmed within
that time, try holding the transmitter in
another position - keeping the indicator
light in view at all times.
If you have any questions or are having
difficulty programming your HomeLink
®
buttons, refer to the HomeLink®web site
at: www.homelink.com or 1-800-355-
3515.

CLEARING THE PROGRAMMED
INFORMATION
The following procedure clears the pro-
grammed information from both buttons.
Individual buttons cannot be cleared. How-
ever, individual buttons can be repro-
grammed, see “Reprogramming a single
HomeLink
®button” (P.2-63).
To clear all programming
1. Press and hold the two outer HomeLink®
buttons until the indicator light begins to
flash in approximately 10 seconds. Do
not hold for longer than 20 seconds.
2. Release both buttons.
HomeLink
®is now in the programming mode
and can be programmed at any time begin-
ning with “Programming HomeLink
®” - Step
1.
REPROGRAMMING A SINGLE
HomeLink®BUTTON
To reprogram a HomeLink®Universal Trans-
ceiver button, complete the following.
1. Press and hold the desired HomeLink
®
button. Do notrelease the button.
2. The indicator light will begin to flash after 20 seconds. Without releasing the
HomeLink
®button, proceed with “Pro-
gramming HomeLink®” - Step 1. For questions or comments, contact
HomeLink
®at: www.homelink.com or 1-
800-355-3515.
The HomeLink
®Universal Transceiver but-
ton has now been reprogrammed. The new
device can be activated by pushing the
HomeLink
®button that was just pro-
grammed. This procedure will not affect
any other programmed HomeLink
®buttons.
IF YOUR VEHICLE IS STOLEN
If your vehicle is stolen, you should change
the codes of any non-rolling code device that
has been programmed into HomeLink
®.
Consult the Owner’s Manual of each device
or call the manufacturer or retailer of those
devices for additional information.
When your vehicle is recovered, you will
need to reprogram the HomeLink
®Univer-
sal Transceiver with your new transmitter
information.
FCC Notice:
For USA:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation. NOTE:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
For Canada:
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1) this device may not cause interference,
and (2) this device must accept any inter-
ference, including interference that may
cause undesired operation of the device.
Instruments and controls2-63

3-26Pre-driving checks and adjustments
SPA2450
Automatic anti-glare type
The inside mirror is designed so that it
automatically changes reflection according
to the intensity of the headlights of the
following vehicle.
The anti-glare system will be automatically
turned on when the ignition switch is pushed
to the ON position.
The anti-glare system also operates for the
outside rearview mirrors.
When the anti-glare system is turned on, the
indicator light
will illuminate and excessive
glare from the headlights of the vehicle
behind you will be reduced.
Push the “*” switch
to make the inside rearview mirror operate normally. The in-
dicator light will turn off. Push the “I” switch
to turn the system on.
Do not allow any object to cover the sensors
or apply glass cleaner on them. Doing so
will reduce the sensitivity of the sensor,
resulting in improper operation.
For the HomeLink
®Universal Transceiver
operation, see “HomeLink®Universal Trans-
ceiver” (P.2-60).
OUTSIDE MIRRORS
WARNING
Objects viewed in the outside mirror on
the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirror could cause
an accident. Use the inside mirror or
glance over your shoulder to properly
judge distances to other objects.
SPA2739
Adjusting outside mirrors
The outside mirror control switch is located
on the armrest.
The outside mirror will operate only when
the ignition switch is in the ACC or ON
position.
Move the switch right or left to select the
right or left side mirror
, then adjust using
the control switch.
Defrosting outside mirrors
The outside mirrors will be heated when the
rear window defroster switch is operated.

Floor mat cleaning ................................................. 7-5
Floor mat installation ............................................ 7-6
FluidAutomatic Transmission Fluid (ATF) ....... 8-13
Brake fluid ........................................... 8-14, 8-15
Capacities and
recommended fluids/lubricants ................. 10-2
Engine coolant .................................................. 8-8
Engine oil ........................................................ 8-10
Power steering fluid ..................................... 8-14
Window washer fluid ................................... 8-15
Fog light switch ................................................... 2-39
Forward Emergency Braking (FEB) ............. 5-101
Forward Emergency Braking (FEB) system
warning light ......................................................... 2-13
Front passenger air bag and status light ..... 1-46
Front power seat adjustment ............................. 1-3
Front seat Front seat adjustment .................................... 1-3
Front-seat active head restraints ...................... 1-9
Fuel Capacities and
recommended fluids/lubricants ................. 10-2
Fuel economy ............................................... 5-117
Fuel Information ............................... 10-4, 10-6
Fuel octane rating ............................ 10-4, 10-6
Fuel-filler cap .................................................. 3-22
Fuel-filler door ............................................... 3-22
Gauge .................................................................. 2-9
Fuel efficient driving tips ................................. 5-116
Fuses ....................................................................... 8-23 Fusible links ........................................................... 8-24
G
Garage door opener
HomeLink®Universal Transceiver ........... 2-60
Gas cap ................................................................... 3-22
Gauge ........................................................................\
. 2-6 Engine coolant temperature gauge ............ 2-8
Fuel gauge ......................................................... 2-9
Odometer ............................................................ 2-7
Speedometer ...................................................... 2-7
Tachometer ....................................................... 2-8
Trip computer ................................................. 2-27
General maintenance ............................................. 9-2
Glove box ............................................................... 2-48
H
Hazard warning flasher switch ........................... 6-2
Head restraints/headrests .................................. 1-5
Headlights
Aiming control (See Adaptive Front
lighting System (AFS)) ................................. 2-36
Bulb replacement .......................................... 8-28
Headlight switch ............................................ 2-34
Heated seats ......................................................... 2-41
Heated steering wheel ....................................... 2-40
Heater Automatic climate control .......................... 4-32
Engine block heater .................................... 5-127
Hill start assist system ..................................... 5-125 HomeLink
®Universal Transceiver .................. 2-60
Hood release ......................................................... 3-17
Hook Coat hooks ..................................................... 2-50
Horn ........................................................................\
. 2-40
I
Ignition switch (Push-button) ................................................. 5-10
Automatic transmission models ................ 5-15
Immobilizer system .............................................. 2-30
Indicator
Lights ................................................................ 2-16
Vehicle information display ........................ 2-20
Indicator lights ...................................................... 2-16
INFINITI Drive Mode Selector ......................... 5-20
INFINITI InTouch™ Owner’s Manual ............... 4-2
INFINITI Vehicle Immobilizer System ............ 2-30
Engine start .................................................... 2-30
Inside mirror .......................................................... 3-25
Inspection/maintenance (I/M) test ............. 10-25
Instrument brightness control ......................... 2-38
Instrument panel ..................................................... 2-5
Intelligent All-Wheel Drive (AWD) ............... 5-118
Intelligent Cruise Control (ICC) ....................... 5-67
Intelligent Cruise Control (ICC) system
MAIN switch indicator ....................................... 2-24
Intelligent Cruise Control (ICC) system
warning light ......................................................... 2-13
Intelligent Key .......................................................... 3-2
11-3

Power door lock switch ................................. 3-5
Rear window and outside mirror
defroster switch ............................................. 2-34
Turn signal switch ......................................... 2-39
Vehicle Dynamic Control (VDC)
off switch ........................................................ 2-44
Warning systems switch ............................ 2-44
T
Tachometer ............................................................. 2-8
Temperature gaugeEngine coolant temperature gauge ............ 2-8
Theft (INFINITI Vehicle Immobilizer System) Engine start .................................................... 2-30
Three-way catalyst ................................................ 5-5
Tilt/telescopic steering ...................................... 3-24
“TIMER” indicator ............................................... 2-23
Tire
Tire replacement indicator .......................... 2-25
Tire rotation .................................................... 8-37
Tire pressure
Low tire pressure warning light ................ 2-14
Tires Flat tire ............................................................... 6-3
Low tire pressure
warning system ........................... 5-5, 6-3, 8-30
Spare tire ........................................................ 8-40
Tire and Loading
information label ............................. 8-32, 10-16
Tire chains ........................................................ 8-36
Tire dressing ...................................................... 7-4 Tire pressure .................................................. 8-30
Tire Pressure Monitoring
System (TPMS) ........................... 5-5, 6-3, 8-30
Types of tires .................................................. 8-36
Uniform tire quality grading .................... 10-22
Wheel/tire size ............................................ 10-12
Wheels and tires ........................................... 8-30
Towing Flat towing ................................................... 10-22
Tow truck towing .......................................... 6-13
Towing a trailer ........................................... 10-22
TPMS
Tire Pressure
Monitoring System .................... 5-5, 6-3, 8-30
Trailer towing .................................................... 10-22
Transceiver
HomeLink
®Universal Transceiver ........... 2-60
Transmission
Automatic Transmission Fluid (ATF) ....... 8-13
Driving with automatic transmission ....... 5-15
Transmission shift lever lock release ....... 5-18
Transmitter (See remote keyless
entry system) ........................................................ 3-14
Traveling or registering in
another country ................................................ 10-14
Trip computer ....................................................... 2-27
Trip odometer ....................................................... 2-27
Trunk
Interior trunk lid release .............................. 3-21
Light .................................................................. 2-59
Pass-through ..................................................... 1-5 Trunk hooks .................................................... 2-51
Trunk lid ........................................................... 3-18
Trunk lid release switch ............................... 3-18
Trunk open request switch ......................... 3-19
Trunk release power cancel switch ......... 3-20
Turn signal switch ............................................... 2-39
U
Underbody cleaning ............................................... 7-3
Uniform tire quality grading .......................... 10-22
V
Vanity mirror ......................................................... 3-28
Vanity mirror lights ............................................. 2-59
Variable voltage control system ..................... 8-18
Vehicle
Dimensions ................................................... 10-13
Recovery (freeing a stuck vehicle) ............ 6-15
Vehicle Dynamic Control (VDC)
off switch ........................................................ 2-44
Vehicle dynamic control
(VDC) system ................................................ 5-123
Vehicle dynamic control (VDC)
warning light ................................................... 2-16
Vehicle identification number (VIN) ............ 10-14
Vehicle information display .............................. 2-20
Vehicle loading information ........................... 10-18
Vehicle security system ...................................... 2-29
Ventilators ............................................................. 4-32
11-7