reset INFINITI Q70 2019 Quick Reference Guide

2
Cockpit Overview
Dynamic Driver Assistance switch (if so equipped)
2 Intelligent Cruise Control (ICC) switches (if so equipped)
3 Wiper and washer switch
4Lo
rem ipsu m Trip computer controls and reset button (behind the steering wheel)
5 Vehicle information display
6 Paddle shifters
7 Instrument brightness control switch (behind the steering wheel)
8 Combined turn signal / headlight control switch
9 Menu control switches and audio control switches
10 Bluetooth® control switches and audio control switches

8
Cruise Control
CONVENTIONAL CRUISE CONTROL (if so equipped)
SETTING A CRUISING SPEED
•


Push the CR

UISE ON/OFF switch
to turn on the system.
•


With the

vehicle at the desired speed, push down the switch
2 to COAST/SET to
enable cruise control.
•


The cruising speed c

an be adjusted to a higher or lower speed by pushing the
control switch
2 up or down.
CANCELING THE PRESET SPEED
•


Push the CANCEL switch
3 or tap the brake pedal.
INTELLIGENT CRUISE CONTROL (ICC) (if so equipped)
The ICC system is designed to maintain a selected distance from the vehicle in front of
you and reduce the speed to match a slower vehicle ahead.
•


T

o increase the distance to the vehicle ahead to be maintained by the ICC system,
push the distance switch
4 until the display shows the desired set distance, which
is shown by the number of lines on the set distance indicator
5.
•


When a

vehicle is detected ahead, a car icon will illuminate on the vehicle ahead
detection indicator
6 and your vehicle will reduce the speed to match the
slower vehicle.
To use Conventional (fixed speed) Cruise Control mode (if so equipped):
•


While cruise c

ontrol is off, push and hold the CRUISE ON/OFF switch
for more
than 1.5 seconds. The CRUISE indicator light will illuminate.
•


A

ccelerate to the desired speed.
•


Push the swit

ch
2 down toward COAST/SET and release it. The SET indicator
light will illuminate.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
INTELLIGENT CRUISE CONTROL (ICC) (if so equipped)

3
2
2

3
4Lo rem ipsu m
56

13
When the button is
pressed, the following modes
will appear on the vehicle
information display
2:
Vehicle Information Display
• MPG
•

MPG/MPH
•

TIME/MILES
•

RANGE • OUTSIDE TEMP
•

SETTING
•

WARNING
To reset the elapsed time/miles, press and hold the
button 3 for more than 1 second. Both elapsed
time/miles will reset at the same time.
Please see your Owner’s Manual for important safety information,
system limitations, and additional operating and feature information.
To adjust the time and the appearance of the clock on the display:
Pr

ess the SETTING button
on the control panel.
Locate and select the “Clock” key to adjust “On-Screen Clock”, “Daylight Savings Time”,
“Clock Format (24h)”, and “Time Zone” on the display.
The time can be adjusted through “Offset Adjustment”
2 by adjusting the minutes
and/or hours forward or backward. The current clock time can be set up to a
difference of 12 hours and 59 minutes.
ANALOG CLOCK
To set the clock forward, press the button
3.
To set the clock backward, press the button
4.
Please see your INFINITI InTouch™ Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
Clock Set/Adjustment

2
34Lo rem ipsu m

3
2