mirror controls INFINITI QX 2011 Owners Manual

1. Cargo light (P. 2-68)
2. Cup holders (3rd row seat) (P. 2-56)
3. Rear ventilators (P. 4-30)
4. Coat hooks (P. 2-59)
5. Rear personal lights (P. 2-66)6. Tray (P. 2-58)
— USB memory operation* (P. 4-61)
— iPod player operation* (P. 4-70)
7. Door armrest — Power window controls (P. 2-61)
— Power door lock switch (P. 3-5) 8.
Automatic drive positioner switch (P. 3-30)
9. Sun visors (P. 3-26)
10. Moon roof switch (P. 2-63)
11. Map lights (P. 2-66)
12. Sunglasses holder (P. 2-56)
13. Inside rearview mirror (P. 3-27)
— HomeLink universal transceiver
(P. 2-68)
14. Cargo area — Power outlet (P. 2-52)
— Cargo floor box (P. 2-60)
— Luggage hooks (P. 2-59)
— Jacking tools (P. 6-4)
15. Rear console box (P. 2-58) — Cup holders (2nd row seat)* (P. 2-54)
— Pocket* (P. 2-58)
16. Cup holders (2nd row seat)* (P. 2-54)
17.
Dual head restraint DVD system* (P. 4-83)
18. Console box (P. 2-57) — Power outlet (P. 2-52)
— Auxiliary input jacks* (P. 4-84)
— Rear automatic air conditioning
system* (P. 4-37)
19. Power outlet (P. 2-52)/Front cup holders (P. 2-54)
*: if so equipped
SSI0743
PASSENGER COMPARTMENT
Illustrated table of contents0-5

1. Adaptive Front lighting System (AFS)switch* (P. 2-40)
2. Instrument brightness control switch (P. 2-41) 3. TRIP/RESET switch for twin trip odometer
(P. 2-6)
4. Headlight, fog light and turn signal switch — Headlight (P. 2-37)
— Turn signal (P. 2-42)
— Fog light (P. 2-42) 5. Steering-wheel-mounted controls
(left side)
— Audio control steering switch (P. 4-81)
— Hands-Free Phone System switch
(P. 4-96)
6. Trip computer switch (P. 2-27)
7. Wiper and washer switch (P. 2-32)
8. Steering-wheel-mounted controls (right side)
— Cruise control system* (P. 5-37)
— Intelligent Cruise Control (ICC) system*
(P. 5-39)
9. Dynamic driver assistance switch* — Lane Departure Prevention (LDP)
system* (P. 5-20)
— Distance Control Assist (DCA) system*
(P. 5-62)
10. Selector lever (P. 5-15)
11. Four-Wheel Drive (4WD) shift switch* (P. 5-84)/ SNOW mode switch (P. 2-49)/
TOW MODE switch (P. 2-49)/Vehicle
Dynamic Control (VDC) OFF switch
(P. 5-98)
12. Headlight aiming control* (P. 2-39)
13. Power lift gate main switch (P. 3-19)
14. Outside rearview mirror remote control switch (P. 3-28)
SSI0748
COCKPIT
0-6Illustrated table of contents

2 Instruments and controls
Cockpit........................................... 2-2
Instrument panel .................................. 2-4
Meters and gauges ................................ 2-5
Speedometer and odometer ..................... 2-6
Tachometer .................................... 2-7
Engine coolant temperature gauge ............... 2-7
Fuel gauge ..................................... 2-8
Engine oil pressure gauge ...................... 2-8
Voltmeter ...................................... 2-9
Meter/ring illumination and needle sweep ........ 2-9
Warning/indicator lights and audible reminders .....2-10
Checking bulbs ................................ 2-11
Warning lights ................................. 2-11
Indicator lights ................................. 2-17
Audible reminders ............................. 2-20
Dot matrix liquid crystal display ...................2-21
Indicators for operation ........................ 2-23
Indicators for maintenance .....................2-25
Trip computer ................................. 2-27
Security systems ................................. 2-29
Vehicle security system ........................ 2-29
INFINITI Vehicle Immobilizer System ............2-31
Windshield wiper and washer switch ...............2-32Washer operation
............................. 2-33
Rain-sensing auto wiper system ................2-33
Rear window wiper and washer switch .............2-34
Rear window and outside mirror defroster/
windshield deicer (if so equipped) switch ..........2-35
Rear window and outside mirror defroster .......2-35
Windshield deicer (if so equipped) ..............2-36
Headlight and turn signal switch ..................2-36
Xenon headlights ............................. 2-36
Headlight switch .............................. 2-37
Headlight washer (if so equipped) ..............2-41
Turn signal switch ............................. 2-42
Fog light switch ............................... 2-42
Hazard warning flasher switch .....................2-43
Heated steering wheel ............................ 2-43
Horn ............................................ 2-44
Heated

seats (if so equipped) ..................... 2-44
Front ......................................... 2-45
Rear ......................................... 2-46
Climate controlled seats (if so equipped) ...........2-46
Warning systems switch (Type A) (if so equipped) . . . 2-47
Warning systems switch (Type B) (if so equipped) . . . 2-48
SNOW mode switch .............................. 2-49

1. Adaptive Front lighting System (AFS)switch*
2. Instrument brightness control switch
3. TRIP/RESET switch for twin trip odometer 4. Headlight, fog light and turn signal switch
— Headlight
— Turn signal
— Fog light 5. Steering-wheel-mounted controls
(left side)
— Audio control steering switch
— Hands-Free Phone System switch
6. Trip computer switch
7. Wiper and washer switch
8. Steering-wheel-mounted controls (right side)
— Cruise control system*
— Intelligent Cruise Control (ICC) system*
9. Dynamic driver assistance switch* — Lane Departure Prevention (LDP)
system*
— Distance Control Assist (DCA) system*
10. Selector lever
11. Four-Wheel Drive (4WD) shift switch*/ SNOW mode switch/TOW MODE switch/
Vehicle Dynamic Control (VDC) OFF switch
12. Headlight aiming control*
13. Power lift gate main switch
14. Outside rearview mirror remote control switch
15. Warning systems switch* — Lane Departure Warning (LDW)*
— Blind Spot Warning (BSW)*
— Forward Collision Warning (FCW)*
SSI0748
COCKPIT
2-2Instruments and controls

If the rear window wiper operation is interrupted
by snow etc., the wiper may stop moving to pro-
tect its motor. If this occurs, turn the wiper
switch to OFF and remove the snow etc. on and
around the wiper arms. After about 1 minute,
turn the switch ON again to operate the wiper.The rear window wiper and washer operate
when the ignition switch is in the ON position.
Turn the switch clockwise from the OFF position
to operate the wiper.
1Intermittent (INT) — intermittent operation
(not adjustable)
2Low (ON) — continuous low speed operation
Push the switch forward
3to operate the
washer. Then the wiper will also operate several
times.
REAR WINDOW AND OUTSIDE MIRROR
DEFROSTER
To defog/defrost the rear window glass and
outside mirrors, start the engine and push the
switch
1on. The indicator light2will come
on. Push the switch again to turn the defroster
off.
It will automatically turn off in approximately 15
minutes.
CAUTION
When cleaning the inner side of the rear win-
dow, be careful not to scratch or damage the
rear window defroster.
SIC4259SIC4385
REAR WINDOW AND OUTSIDE MIRROR
DEFROSTER/WINDSHIELD DEICER (if so
equipped) SWITCH
Instruments and controls2-35

WINDSHIELD DEICER (if so equipped)
The windshield deicer switch (rear window and
outside mirror defroster switch) operates when
the ignition switch is in the ON position.
The deicer is used to remove ice from the
windshield when a wiper is frozen to the wind-
shield.
When the switch
1is pushed, the indicator
light
2illuminates and the deicer operates for
approximately 15 minutes. The rear window
defroster will activate at the same time. After
the preset time has passed, the deicer will turn
off automatically. To turn off the deicer manu-
ally, push the deicer switch again, and the
indicator light turns off.
CAUTION
● When operating the deicer continuously, be
sure to start the engine. Otherwise, it may
cause the battery to discharge.
● When cleaning the inner side of the window,
be careful not to scratch or damage the elec-
trical conductors on the surface of the
window.
XENON HEADLIGHTS
WARNING
HIGH VOLTAGE
● When xenon headlights are on, they produce
a high voltage. To prevent an electric shock,
never attempt to modify or disassemble. Al-
ways have your xenon headlights replaced
at an INFINITI retailer.
● Xenon headlights provide considerably
more light than conventional headlights. If
they are not correctly aimed, they might
temporarily blind an oncoming driver or the
driver ahead of you and cause a serious acci-
dent. If headlights are not aimed correctly,
immediately take your vehicle to an INFINITI
retailer and have the headlights adjusted
correctly.
HEADLIGHT AND TURN SIGNAL SWITCH
2-36Instruments and controls

Battery saver system
A chime will sound when the driver side door is
opened with the light switch in theorposition and the ignition switch in the
OFF or LOCK position.
When the headlight switch is in the
orposition while the ignition switch is in
the ON position, the lights will automatically
turn off 5 minutes after the ignition switch has
been pushed to the OFF position.
When the headlight switch remains in the
orposition after the lights auto-
matically turn off, the lights will turn on when
the ignition switch is pushed to the ON posi-
tion.
CAUTION
● When you turn on the headlight switch again
after the lights automatically turn off, the
lights will not turn off automatically. Be sure
to turn the light switch to the OFF position
when you leave the vehicle for extended pe-
riods of time, otherwise the battery will be
discharged.
● Never leave the light switch on when the
engine is not running for extended periods of
time even if the headlights turn off
automatically.
Headlight aiming control (if so
equipped)
Depending on the number of occupants in the
vehicle and the load it is carrying, the headlight
axis may be higher than desired. If the vehicle
is traveling on a hilly road, the headlights may
directly hit the rearview mirror of the vehicle
ahead or the windshield of the oncoming ve-
hicle. The light axis can be lowered with the
operation of the switch.
The larger the number designated on the
switch, the lower the axis.
When traveling with no heavy load or on a flat
road, select position 0.
WARNING
Xenon headlights are extremely bright com-
pared to conventional headlights. If the xenon
headlights hit the rearview mirror of the vehicle
ahead or the windshield of oncoming vehicle,
the driver of these vehicles may have difficulty
driving because of the brightness. Use the
headlight aiming control switch to lower the
light axis. See “XENON HEADLIGHTS” earlier in
this section for additional information.
Daytime running light system
(Canada only)
The daytime running lights automatically illumi-
nate when the engine is started with the park-
ing brake released. The daytime running lights
operate with the headlight switch in the OFF
position or in the
position. Turn the
headlight switch to theposition for full
illumination when driving at night.
If the parking brake is applied before the engine
is started, the daytime running lights do not
illuminate. The daytime running lights illumi-
nate once the parking brake is released. The
daytime running lights will remain on until the
ignition switch is pushed to the OFF position.
SIC2275
Instruments and controls2-39

The BSW system will illuminate the BSW indi-
cator lights, located next to the outside mirrors,
when the radar sensors detect a vehicle in the
detection zone. If the turn signal is activated in
the direction of the detected vehicle, a chime
sounds twice and the BSW indicator light will
flash. (See “BLIND SPOT WARNING (BSW) SYS-
TEM” in the “5. Starting and driving” section.)
The FCW system will sound a warning chime
and the vehicle ahead detection indicator light
blinks to alert the driver if the vehicle is travel-
ing close to the vehicle ahead. (See “FORWARD
COLLISION WARNING (FCW) SYSTEM” in the “5.
Starting and driving” section.)
The warning systems switch is automatically
turned on when the engine is started, and the
warning systems ON indicator
1on the switch
illuminates.
To cancel the warning systems, push the warn-
ing systems switch to turn off the system. The
warning systems ON indicator will turn off. NOTE:
If you continue to push the warning systems
switch from off to on for over 4 seconds, a chime
will sound. This will change the default status of
the LDW, BSW and FCW systems to OFF so that
these systems will not automatically turn on
when the engine is started. If this procedure is
repeated, the default status will return to ON.
The warning systems switch is used to turn on
and off the warning systems (Forward Collision
Warning (FCW), Lane Departure Warning (LDW)
and Blind Spot Warning (BSW) systems) that are
activated using the settings menu on the center
display.
When the warning systems switch is turned off,
the indicator
1on the switch is off. The
indicator will also be off if all of the warning
systems are deactivated using the settings
menu.
SSD0956
WARNING SYSTEMS SWITCH (Type B) (if so
equipped)
2-48Instruments and controls

The FCW system will sound a warning chime
and the vehicle ahead detection indicator light
blinks to alert the driver if the vehicle is travel-
ing close to the vehicle ahead. (See “FORWARD
COLLISION WARNING (FCW) SYSTEM” in the “5.
Starting and driving” section.)
The LDW system will sound a warning chime
and blink the lane departure warning light
(orange) to alert the driver if the vehicle is
traveling close to either the left or the right of a
traveling lane with detectable lane markers.
(See “LANE DEPARTURE WARNING
(LDW)/PREVENTION (LDP) SYSTEM” in the “5.
Starting and driving” section.)
The BSW system will turn on the BSW indicator
lights, located next to the outside mirrors, if the
radar sensors detect a vehicle in the detection
zone. If the turn signal is activated in the
direction of the detected vehicle, a chime
sounds twice and the BSW indicator light will
flash. (See “BLIND SPOT WARNING (BSW) SYS-
TEM” in the “5. Starting and driving” section.)For driving or starting the vehicle on snowy
roads or slippery areas, push on the SNOW
mode switch. The SNOW mode indicator light
will illuminate. When the SNOW mode is acti-
vated, engine output is controlled to avoid
wheel spin.
Push off the SNOW mode for normal driving.
TOW MODE should be used when pulling a
heavy trailer or hauling a heavy load. Driving
the vehicle in TOW MODE with no trailer/load or
light trailer/light load will not cause any dam-
age. However, fuel economy may be reduced,
and the transmission/engine driving character-
istics may feel unusual.
SIC4454SIC4474
SNOW MODE SWITCH
TOW MODE SWITCH
Instruments and controls2-49

The light on the vanity mirror will turn on when
the cover on the vanity mirror is opened.
When the cover is closed, the light will turn off.
The lights will also turn off after 30 minutes
when the lights remain illuminated to prevent
the battery from becoming discharged.The cargo light switch has three positions: ON
1, center2and OFF3.
ON position
When the switch is in the ON position
1, the
cargo light will illuminate.
Center position
When the switch is in the center position
2,
the cargo light will illuminate when the lift gate
is opened.
OFF position
When the switch is in the OFF position
3, the
cargo light will not illuminate. HomeLink
Universal Transceiver provides a
convenient way to consolidate the functions of
up to three individual hand-held transmitters
into one built-in device.
HomeLink Universal Transceiver:
● Will operate most Radio Frequency (RF) de-
vices such as garage doors, gates, home and
office lighting, entry door locks and security
systems.
● Is powered by your vehicle’s battery. No
separate batteries are required. If the vehi-
cle’s battery is discharged or is discon-
nected, HomeLink will retain all program-
ming.
Once HomeLink Universal Transceiver is pro-
grammed, retain the original transmitter for fu-
ture programming procedures (Example: new ve-
hicle purchases). Upon sale of the vehicle, the
programmed HomeLink Universal Transceiver
buttons should be erased for security purposes.
For additional information, see “PROGRAMMING
HomeLink” later in this section.
SIC4448SIC4418
VANITY MIRROR LIGHTS CARGO LIGHTHOMELINKUNIVERSAL TRANSCEIVER
2-68Instruments and controls