change wheel INFINITI QX30 2017 Owner's Manual
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2017, Model line: QX30, Model: INFINITI QX30 2017Pages: 556, PDF Size: 4.93 MB
Page 74 of 556
Other supplemental front-impact air
bag precautions
WARNING
•Do not place any objects on the steering
wheel pad or on the instrument panel. Also,
do not place any objects between any occu-
pant and the steering wheel or instrument
panel. Such objects may become dangerous
projectiles and cause injury if the front air
bags inflate.
•Immediately after inflation, several front air
bag system components will be hot. Do not
touch them; you may severely burn your-
self.
•No unauthorized changes should be made
to any components or wiring of the supple-
mental air bag system. This is to prevent
accidental inflation of the supplemental air
bag or damage to the supplemental air bag
system.
•Do not make unauthorized changes to your
vehicle’s electrical system, suspension sys-
tem or front end structure. This could affect
proper operation of the front air bag system.
•Tampering with the front air bag system
may result in serious personal injury. Tam-pering includes changes to the steering
wheel and the instrument panel assembly
by placing material over the steering wheel
pad and above the instrument panel or by
installing additional trim material around
the air bag system.
•Removing or modifying the front passenger
seat may affect the function of the air bag
system and result in serious personal in-
jury.
•Modifying or tampering with the front pas-
senger seat may result in serious personal
injury. For example, do not change the front
seats by placing material on the seat cush-
ion or by installing additional trim material,
such as seat covers, on the seat that are not
specifically designed to assure proper air
bag operation. Additionally, do not stow
any objects under the front passenger seat
or the seat cushion and seatback. Such ob-
jects may interfere with the proper opera-
tion of the occupant classification sensor
(pressure sensor).
•No unauthorized changes should be made
to any components or wiring of the seat belt
system. This may affect the front air bag
system. Tampering with the seat belt sys-
tem may result in serious personal injury.
•It is recommended that you visit an INFINITI
retailer for work on and around the front air
bag. It is also recommended that you visit
an INFINITI retailer for installation of electri-
cal equipment. The Supplemental Restraint
System (SRS) wiring harnesses* should not
be modified or disconnected. Unauthorized
electrical test equipment and probing de-
vices should not be used on the air bag
system.
•A cracked windshield should be replaced
immediately by a qualified repair facility. A
cracked windshield could affect the func-
tion of the supplemental air bag system.
* The SRS wiring harness connectors are
yellow and orange for easy identification.
When selling your vehicle, we request that you
inform the buyer about the front air bag system
and guide the buyer to the appropriate sections
in this Owner’s Manual.
Safety — seats, seat belts and supplemental restraint system1-51
** Click HERE to see "Owner's Manual Supplement" **
Page 101 of 556
Lane not recommended5: you will not be able
to complete the next change of direction if you
stay in this lane.
Recommended lane and new lane during a
change of direction
3: in this lane you will be
able to complete the next two changes of
direction without changing lane.
Recommended lane
4: in this lane you will be
only able to complete the next change of direc-
tion without changing lane.
Other status indicators of the navigation system:
The navigation system displays additional infor-
mation and the vehicle status. Possible dis-
plays:
•[New route...] or [Calculating route...]
A new route is calculated.
•[Off map] or [Off road]
The vehicle position is outside of the area of
the digital map (off-map position).
•[No route]
No route could be calculated to the selected
destination.
•
You have reached the destination or an
intermediate destination.
Audio menu
Selecting a radio station:
1Frequency range
2Station frequency/name with memory po-
sition
The memory position is only displayed along
with station
2if this has been stored.
1. Switch on the audio system or navigation system and select Radio.
2. Press the
orbutton on the
steering wheel to select the [Audio] menu.
3. To select a stored station, briefly press
or.
NIC2723NIC2724
2-20Instruments and controls
Page 106 of 556
1. Press theorbutton on the
steering wheel to select the [Settings] menu.
2. Press the
orbutton to select
[Instrument Cluster] submenu.
3. Press
4. Press the
orbutton to select
the [Display Unit Speed-/Odometer] func-
tion.
You will see the selected setting: [miles] or
[km].
5. Press the
The selected unit of measurement for distance
applies to:
•Digital speedometer in the [Trip] menu.
•Total distance recorder and the trip meter.
•Trip computer.
•Current fuel consumption and approximate
range.
•Navigation instructions in the [Navi] menu.
•Cruise control.
•Speed limiter.
•Intelligent cruise control (ICC).
•Maintenance service interval display. Switching the additional speedometer on/off.
The [Speedometer (mph)] or [Speedometer (km/
h)] function allows you to choose whether the
vehicle information display in the status area
shows the speed in MPH or in km/h instead of
the outside temperature.
1. Press the
orbutton on the
steering wheel to select the [Settings] menu.
2. Press the
orbutton to select
[Instrument Cluster] submenu.
3. Press
4. Press the
orbutton to select
the [Speedometer (mph)] or [Speedometer
(km/h)] function.
You will see the selected setting: [On] or
[off].
5. Press the
Selecting the permanent display function.
You can determine whether the vehicle informa-
tion display permanently shows the outside
temperature or the speed in MPH.
1. Press the
orbutton on the
steering wheel to select the [Settings] menu.
2. Press the
orbutton to select
[Instrument Cluster] submenu. 3. Press
4. Press the
orbutton to select
the [Outside Temperature] function.
You will see the selected setting: [outside
temperature] or [Speedometer (mph)].
5. Press the
Lights
Switching the Adaptive Front Lighting System
on/off:
1. Press theorbutton on the
steering wheel to select the [Settings] menu.
2. Press the
orbutton to select
[Light] submenu.
3. Press
4. Press the
orbutton to select
the [Adaptive front lighting system] function.
If the [Adaptive front lighting system] func-
tion has been switched on, the cone of light
and the
symbol in the vehicle infor-
mation display are shown in orange.
5. Press the
Instruments and controls2-25
Page 107 of 556
When you switch the [Adaptive front lighting
system] function on, you activate the following
functions:
•Freeway mode
•Active light function
•Cornering light function
If you set the low beam headlights for driving
on the right/left, the vehicle information display
shows the [Adaptive front lighting system: Sys-
tem Inoperative Inactive For Left-side Traffic] or
[Adaptive front lighting system: System Inop-
erative Inactive for Right-side Traffic] display
message instead of the [Adaptive front lighting]
function in the [Light] submenu.
For further information about the Adaptive Front
Lighting system, see Adaptive front lighting
system (LED headlight only) (if equipped) later
in this section
Setting the low beam headlights for driving on
the left/right
:
This function is only available on vehicles with
the Adaptive Front Lighting System (see Adap-
tive front lighting system (LED headlight only) (if
equipped) later in this section).
1. Press the
orbutton on the
steering wheel to select the [Settings] menu. 2. Press the
orbutton to select
[Light] submenu.
3. Press
4. Press the
orbutton to select
the [Low-b. Headl. Setting For:] function.
You will see the selected setting: [Right-side
Traffic] or [Left-side Traffic].
5. Press the
not take place until the next time the vehicle
is stationary.
If you set the low beam headlights for driving
on the right/left, then freeway mode is unavail-
able. This is only deactivated if the setting for
driving on the left/right is set opposite to your
vehicle’s country version.
An INFINITI retailer can set the low beam head-
lights for driving on the left/right.
Setting the brightness of the ambient lighting
:
1. Press theorbutton on the
steering wheel to select the [Settings] menu.
2. Press the
orbutton to select
[Light] submenu.
3. Press
orbutton to select
the [Ambient Light Brightness] function.
You will see the selected setting.
5. Change the setting with
not take place until the next time the vehicle
is stationary.
6. Press the
orbutton to adjust
the brightness to a level from [Off] to [Level
5] (bright).
7. Press the
button to save the
setting.
Activating/deactivating the surround lighting
and exterior lighting delayed switch-off
:
If you have activated the Surround lighting
function and the light switch is set to
the following functions are activated when it is
dark:
•Surround lighting: the exterior lighting re-
mains lit for 40 seconds after unlocking with
the key. If you start the engine, the surround
lighting is switched off and automatic head-
light mode is activated .
•Exterior lighting delayed switch-off: the exte-
rior lighting remains lit for 60 seconds after
the engine is switched off. If you close all the
2-26Instruments and controls
Page 148 of 556
HIGH BEAM ASSIST (LED HEADLIGHT
ONLY)
You can use this function to set the headlights
to change between low beam and high beam
automatically. The system recognizes vehicles
with their lights on, either approaching from the
opposite direction or traveling in front of your
vehicle, and consequently switches the head-
lights from high beam to low beam.
The system automatically adapts the low beam
headlight range depending on the distance to
the other vehicle. Once the system no longer
detects any other vehicles, it switches on the
high beam headlights again.
The system’s optical sensor is located behind
the windshield near the overhead control panel.
WARNING
•The high beam assist system is a conve-
nience but is not a substitute for safe driv-
ing operation. The driver should remain
alert at all times, ensure safe driving prac-
tices and switch the high beams and low
beam manually when necessary.
•The high beam or low beam may not switch
automatically under the following condi-
tions. Switch the high beam and low beam
manually.– During bad weather (rain, fog, snow,
wind, etc.).
– When a light source similar to a head-
light or tail light is in the vicinity of the
vehicle.
– When the headlights of the oncoming
vehicle or the leading vehicle are turned
off, when the color of the light is affected
due to foreign materials on the lights, or
when the light beam is out of position.
– When there is a sudden, continuous
change in brightness.
– When driving on a road that passes over
rolling hills, or a road that has level dif-
ferences.
– When driving on a road with many
curves. –
When a sign or mirror-like surface is re-
flecting intense light towards the front of
the vehicle.
– When the container, etc. being towed by
a leading vehicle is reflecting intense
light.
– When a headlight on your vehicle is dam-
aged or dirty.
– When the vehicle is leaning at an angle
due to a punctured tire, being towed, etc.
•The timing of switching the low beam and
high beam may change under the following
situations.
– The brightness of the headlights of the
oncoming vehicle or leading vehicle.
– The movement and direction of the on-
coming vehicle and the leading vehicle.
– When only one light on the oncoming
vehicle or the leading vehicle is illumi-
nated.
– When the oncoming vehicle or the lead-
ing vehicle is a two-wheeled vehicle.
– Road conditions (incline, curve, the road
surface, etc.).
– The number of passengers and the
amount of luggage.
•High beam Assist does not recognize road
users:
– Who have no lights, e.g. pedestrians.
NDS595
Instruments and controls2-67
Page 258 of 556
MAIN AUDIO OPERATION
Turning audio system on/off
The ignition switch must be in the ACC or ON
position to turn on the audio system. Push
turn on the last audio source which was playing
immediately before the system was turned off.
To turn off the audio system, push
or <>on the steering wheel again.
Selecting audio source
1. Turn on the audio source menu screen by
touching [Source] on the upper left corner of
the audio screen.
2. Select an item from the audio source menu screen.
•Pushing
change the audio source.
See Main audio buttons earlier in this
section.
•If the audio system has been turned off while
one of the audio sources was playing, turn-
ing the audio system back on will play the
audio source that was playing when the
system was turned off.
•The audio source can also be changed with
the source bar on top of the audio screen.
•Audio APPS information will be displayed
when music is played via INFINITI InTouch
Apps.
Audio source bar
The audio source can be changed with the
source bar on top of the audio screen. The
source bar display can be turned on/off.
Turning source bar on/off
:
You can select whether the source bar on top of
the audio screens is displayed or not.
NAA1714
Display screen, heater and air conditioner, and audio system4-65
Page 279 of 556
Making a call
1. Push
Page 281 of 556
•To adjust the volume of the person’s voice to
be louder or quieter, push<->/<+>on the
steering wheel or turn
audio main button, while talking on the
phone.
•Touch [Mute] if you do not want your voice to
be heard by the person on the other end of
the line.
CONNECTING BLUETOOTH® DEVICE
Your vehicle is equipped with a Bluetooth®
Hands-Free Phone System and Bluetooth®
streaming audio device. If you are an owner of a
compatible Bluetooth® enabled cellular phone
or Bluetooth® audio device, you can set up the
wireless connection between your cellular
phone and the in-vehicle phone module, or
Bluetooth® audio and in-vehicle audio module.
With Bluetooth® wireless technology, you can
make or receive a telephone call with your
cellular phone in your pocket and listen to
music on your Bluetooth® streaming audio
device via the in-vehicle system.
Connecting cellular phone/audio
device
1. Push
Page 287 of 556
Mail settings
Various settings can be changed from the Mail
Settings screen.
1. Push
2. Touch [Settings].
3. Touch [Phone/Mail].
4. Touch [Mail Settings].The following mail setting items are available.Setting item Action
[Message Download
Settings]
The transfer function can be
turned on/off. When the
transfer function is on, the
phonebook on the cellular
phone will be automatically
downloaded to the hands-free
text messaging system when
connected.
[Attempts for Send-
ing] The number of reattempts af-
ter failing to send a text mes-
sage can be selected between
0 and 3.
[New Message Alert] The type of tone used for the notification sound can be se-
lected.
[Edit Text Message
Replies] The template (text to select
from when composing an out-
going message) can be ed-
ited.
4-94Display screen, heater and air conditioner, and audio system
Page 290 of 556
Laws in some jurisdictions may restrict the use
of some of the applications and features, such
as social networking and texting. Check local
regulations for any requirements.
INFINITI InTouch provides in-vehicle access to
two types of applications: Vehicle Apps and
Mobile Apps. Vehicle Apps can be downloaded
from App Garage in the menu screen. Mobile
Apps are a limited selection of popular
smartphone-based Apps that have been cus-
tomized for in-vehicle use. Mobile Apps can be
accessed by connecting a compatible smart-
phone to the vehicle.
The system allows you to download new appli-
cations, update downloaded applications and
delete downloaded applications in a similar
manner to popular smartphone operating sys-
tems.
Some pre-installed Vehicle Apps can be used
without taking any further action. However, you
will need to connect a compatible smartphone
to the vehicle in order to update Vehicle Apps or
use Mobile Apps.
To view a list of compatible smartphones, visit
www.infinitiusa.com/bluetooth.
The use of applications is only guaranteed for
smartphones that have been tested and ap-
proved for use with INFINITI InTouch Apps. OnlyiPhoneRand Android devices are currently
supported. Android smartphones must support
Bluetooth® and SPP (Serial Port Profile).
Using with iPhone
R:
To use InTouch Apps with your iPhone
R, the
iPhone
Rmust be connected with a USB cable.
If an additional iPhone
Ris connected by
wired connection while an iPod
Ris being
used via a wired connection, the service will not
be available. To use the service, it is first
necessary to unplug the iPod
Rcable from the
USB port where the iPod
Ris connected.
Steering wheel mounted controls earlier in
this section
Using with Android smartphone:
To use InTouch Apps with your Android smart-
phone, the device must be connected via
Bluetooth® and registered as a hands-free
device.
Bluetooth® Hands-Free Phone System earlier
in this section
A compatible smartphone is required to use
Mobile Apps or to access connected features of
certain Vehicle Apps. Please visit
www.infinitiusa.com/bluetooth for a list of com-
patible devices.
CAUTION
•To use Mobile Apps, the INFINITI InTouch
App must be installed and running on the
compatible smartphone. This App can be
downloaded from the iTunes APP Store or
the Google Play store.
•Mobile Apps also require an active subscrip-
tion and valid INFINITI Owner Portal ac-
count. Please see www.infinitiusa.com/
infinitiintouch/support/ (for United States)
or www.infiniti.ca/infinitiintouch (for
Canada) for more information
•Communication fees may be charged de-
pending on the contents of the contract be-
tween the user and the cellular phone car-
rier.
•Before using this service, some applica-
tions may require individual subscriptions.
•For some applications, the system may not
support all functions of the applications
that are installed on your smartphone. Ad-
ditionally, due to service provider policies,
the contents of application services may be
changed or terminated.
•If the smartphone is outside the network
range, some functions cannot be used.
INFINITI INTOUCH APPS OVERVIEW
Display screen, heater and air conditioner, and audio system4-97