reset INFINITI QX30 2018 User Guide

SYSTEM STATUS SCREEN
By pushingon the audio switch
the current status of the system can be dis-
played.
Models with navigation system:
Touch [<] / [>] to switch between air condi-
tioner status and navigation route informa-
tion screen.
ITEMS TO BE SET INITIALLY
The initial setting operations included in this
section should be performed before using the
system for the first time.
Screen settings
The display can be turned on/off and the
image quality of the display can be adjusted in
this menu.
1. Push

ADDITIONAL SYSTEM
INFORMATION
System Start-Up
Due to the large number of features and
capabilities that the INFINITI InTouch system
needs to load on start-up, it may take up to a
minute for all functions (such as Apps) to be
available. The system will display the mes-
sage indicating that the application is loading
during this time. During the start-up period,
hard button controls for audio will become
available before start-up is complete. Fea-
tures will become available in the following
order.
•Audio volume and music playback
•Audio Full Screen Access
•Full App Availability – System will display
the message indicating the completion of
the application loading process.
System Response Delay
INFINITI InTouch uses an operating system
like those found on many computers, tablets
and cell phones. Like these devices, process-
ing speed may vary, and system response
delays or resets may occur intermittently.
This does not indicate a malfunction, and
further information on system operation can
be found below. In most situations, simply waiting a few mo-
ments longer should be sufficient for the
pending operations to complete.
If the system temporarily does not respond to
commands, the system can be easily reset.
Simply push down the Audio Power knob for
at least 5 seconds. The system will turn off
and restart.
After restart, all functions should be avail-
able.
•Audio will resume, but if you were using
Bluetooth® Audio or an Audio App, the
connection may need to be re-established.
•If a navigation route was set, the route
should resume automatically (models with
navigation system).
•If a phone call was in progress, the call may
be temporarily transferred back to the
handset.
System Reset
As noted above, intermittent system resets
may occur during normal operation. You may
also wish to reset the system if you find that a
particular feature is not loading or respond-
ing. Often, a quick system reset will resolve
any issue you may be experiencing. After re-
start, all functions will be available as de-
scribed above. System Updates
Like many digital devices, the INFINITI
InTouch system is designed to allow for soft-
ware updates as enhancements are devel-
oped and additional features added. If you
have questions about system performance, it
is recommended you contact your INFINITI
retailer to ensure that your vehicle has had
the latest available software installed.
Operating Tips
INFINITI InTouch provides several methods
of operation to suit your preferences. The
following are suggested operating tips.
•Operating the INFINITI Controller, Steer-
ing Wheel Controls, or other controls too
quickly can cause a lag between the con-
trol and the display. Operate the controls
carefully and allow the system to respond
to your request.
•INFINITI recommends using Voice Recog-
nition whenever possible to select options
while driving. Some touch screen function-
ality is intentionally unavailable during
driving. Please view the available voice
commands by pushing <
>on the steer-
ing wheel and then selecting a category on
the display.
4-16Display screen, heater and air conditioner, and audio system

2. The rear view of the vehicle is displayed onthe screen
Aas illustrated when the shift
lever is moved to the R (Reverse) position.
3. Slowly back up the vehicle adjusting thesteering wheel so that the predicted
course lines
Benter the parking space
C. 4. When the rear of the vehicle enters the
parking space
C, maneuver the steering
wheel to make the vehicle width guide
lines
Dparallel to the parking spaceC.
5. When the vehicle is parked in the space completely, press the P (Park) button and
apply the parking brake.
ADJUSTING THE SCREEN
1. While the RearView Monitor is displayed,touch the settings icon.
2. Select the item you wish to adjust:
[Brightness]:
Adjust display settings by touching [+]/[-].
[Contrast]:
Adjust display settings by touching [+]/[-].
[Black level]:
Adjust display settings by touching [+]/[-].
[Tint]:
Adjust display settings by touching [+]/[-].
[Color]:
Adjust display settings by touching [+]/[-].
[Reset Settings]:
Return all the settings to default
SAA1898
4-22Display screen, heater and air conditioner, and audio system

5. When the vehicle is parked in the spacecompletely, press the P (Park) button and
apply the parking brake.
HOW TO SWITCH THE DISPLAY
The view on the Around View Monitor screen
can be switched by pressing the
button or by changing the shift lever position.
Press the button:
When the button is pushed while
a screen other than a camera screen is dis-
played, the Around View Monitor operates
and the front view and bird's-eye view are
displayed. Push the button to
switch the display to the front view and
front-side view screen.
ADJUSTING THE SCREEN
1. Push the

This system supports various USB memory
devices, USB hard drives and iPod players.
Some USB devices may not be supported by
this system.
•Partitioned USB devices may not play cor-
rectly.
•Some characters used in other languages
(Chinese, Japanese, etc.) may not appear
properly in the display. Using English lan-
guage characters with a USB device is
recommended.
General notes for USB use:
Refer to your device manufacturer’s owner
information regarding the proper use and
care of the device.
Notes for iPod use:
iPod is a trademark of Apple Inc., registered in
the U.S. and other countries.
•Improperly plugging in the iPod may cause
a checkmark to be displayed on and off
(flickering). Always make sure that the
iPod is connected properly.
•An iPod nano (1st Generation) may remain
in fast forward or rewind mode if it is
connected during a seek operation. In this
case, please manually reset the iPod.
•An iPod nano (2nd Generation) will con-
tinue to fast-forward or rewind if it is dis-
connected during a seek operation.
•An incorrect song title may appear when
the Play Mode is changed while using an
iPod nano (2nd Generation)
•Audiobooks may not play in the same or-
der as they appear on an iPod.
•Large video files cause slow responses in
an iPod. The vehicle display may momen-
tarily black out, but will soon recover.
•If an iPod automatically selects large video
files while in the shuffle mode, the vehicle
display may momentarily black out, but will
soon recover.
4-58Display screen, heater and air conditioner, and audio system

NAMES AND FUNCTIONS OF
AUDIO CONTROL BUTTONS
Main audio buttons
1:
Functions to seek radio stations or to skip
and fast-forward/rewind through
tracks.
2<>:
Push to eject a disc.
3:
Push to switch to the radio mode. The
radio band will switch between AM, FM,
and SXM (SiriusXM) each time the button
is pushed.
4:
Each time the button is pushed, a differ-
ent audio source (CD, iPod, USB or
Bluetooth® Streaming Audio) will be se-
lected.
5Disc slot:
Insert a disc with the label side facing up.
6:
Functions to manually tune AM/FM , to
select SXM categories and to select
MP3/WMA/AAC folders.
7Radio memory buttons: Up to six pre-
ferred stations can be registered in the
preset list for each band.
8:
Push to turn the audio system on/off.
Turn to adjust the volume.
Audio APPS information will be displayed
when music is played via INFINITI InTouch
Apps.
NAA1704
4-64Display screen, heater and air conditioner, and audio system

RADIO
How to view radio operation screen
* For models with radio status indicator and
reception information display.The radio screen can be viewed and operated
on the display.
1Radio mode indicator: The current radio
mode is displayed.
2[Source]: Touch to switch to the source
select screen. See "Selecting audio
source" later in this section
3[Control]: Touch to display the control
screen. See "Radio Controls" later in this
section
4HD Radio reception status indicator (for
AM and FM):
The icon is displayed when HD Radio
digital signal is received. The icon flashes
when the radio is acquiring the digital
signal but the sound output is not yet in
the HD mode.
5Radio band indicator: The currently se-
lected radio band (AM, FM or SXM) is
displayed.
6Reception information display: Reception
information available at the time such as
frequency, station/channel name, etc..
are displayed.
On the SXM screen, touch this area to
display the category list.
736 stations/channels can be registered in
the preset list.
See "Presetting" later in this section.
NOTE
HD Radio reception needs to be activated to
receive HD Radio broadcasts. This enables
you to receive radio broadcasts digitallyNAA1716
Display screen, heater and air conditioner, and audio system4-67

(where available), providing a better quality
sound with clear reception. When this fea-
ture is not activated or HD Radio broadcasts
are not available, you will receive analog ra-
dio (AM/FM broadcasts).
Radio source control
There are 2 elements used in the preset list
area that are associated with radio source:
1Highlight for INFINITI controller opera-
tion.
2(With triangle) Indicator of current se-
lected preset station.
Radio operation
Radio activation and band selection:
Push or select the preferred radio
band (AM, FM or SXM) from the audio
source list to turn on the radio. Each time
is pushed, the radio band will
change.
For details, see "Selecting audio source" later
in this section. NOTE
When the stereo broadcast signal is weak,
the radio will automatically change from
stereo to monaural reception.
Seeking stations/channels:
AM and FM Radio
Push
to tune from low
to high or high to low frequencies and to stop
at the next broadcasting station.
SiriusXM Satellite Radio
Push to tune to the
first channel of the next or previous category.
Scan tuning:
To tune the stations/channels, touch [Con-
trol] on the display and touch [Scan]. The
stations/channels will be tuned form low to
high frequencies and stop at each broadcast-
ing station/channel for 5 seconds. Touching
[Scan] again during this 5 second period will
stop scan tuning and the radio will remain
tuned to that station/channel.
Presetting:
Up to 36 stations/channels can be registered
for AM, FM and SXM in the preset list.
1. Select a radio band (AM, FM or SXM).
NAA1717
4-68Display screen, heater and air conditioner, and audio system

2. Tune to the station/channel you wish tostore in the preset list.
3. (Radio screen operation) Touch and hold one of the preset numbers in the preset
list.
(Radio memory buttons operation) Push
and hold the desired station/channel pre-
set button <1> to <6>.
4. The information such as frequency (AM/ FM), channel number (SXM), etc. will be
displayed on the preset list.
To change the preset stations/channels,
touch and hold one of the preset numbers.
You can select whether to change the
station/channel or to delete the preset set-
ting.
Alert notification (SXM only):
Favorite artists and songs can be registered
to receive an alert notice wen a song of the
registered conditions is on the radio. To tune
to the respective channel, touch [Listen to be
consistent]. The alert can be ignored by
touching [Cancel]. Satellite Radio:
•The satellite mode requires and active
SiriusXM Satellite Radio subscription. The
satellite service is available only to those at
least 18 and older in the 48 contiguous
United States.
•It may take some time to receive the acti-
vation signal after the initiation of the
SiriusXM Satellite Radio subscription. Af-
ter receiving the activation signal, an avail-
able channel list will automatically be up-
dated in the radio. Switch the ignition
switch from LOCK to ACC to update the
SiriusXM channel list.
Radio Controls
Touch [Control] on the AM, FM or SXM
screen to display the control screen.
The following items are available:
FM/AM:
•[Station List]
Touch to display the available station list.
While listening to FM radio, Auto Update
is not performed.
•[Scan]
Touch to scan tune the stations
See "Radio operation" earlier in this section
•[HD mode]
When this item is turned on, the analog
and digital reception switches automati-
cally. When this item is turned off, the
reception is fixed in the analog mode.
•[HD Info]
Touch to display the HD Radio informa-
tion such as name of song, artist and al-
bum.
This item is available when [RDS Info] is
not active.
•[Tag] (HD Radio broadcasts only)
Touch to register the tag information for
iTunes Tagging. If an iPod is plugged in
after the registration, the tag information
can be stored in an iPod and be used to
purchase the songs via iTunes.
•[RDS Info] (FM only)
Touch to display the RDS information.
This item is available only when [HD Radio
Info] is not active.
SXM:
•[Categories]
Touch to display the category list.
Display screen, heater and air conditioner, and audio system4-69

App Garage Settings screen
Application settings can be changed on the App Garage Settings screen.
1. Push