ignition INFINITI QX30 2018 Quick Reference Guide

7
Hood Latch
To open the hood, pull the hood release handle located
below the instrument panel . Slightly lift the hood upward
and pull the lever to the left to unlock the hood. Then insert
the support rod into the slot.
To close the hood, drop it from a height of 8-12 inches
(20-30 cm). If the hood sensor detects the hood is not
completely latched shut, the wipers will not function.
Please see your Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
Sun Visors
Pull down the sun visor to block glare from the front.
Remove the sun visor from the center mount by lifting
it slightly and swing it to the side to block glare from
the side window.
Slide the sun visor out from the mount to further
extend the visor location.
Please see your Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
To apply the parking brake, press the
electric parking brake handle
located
below the instrument panel, regardless of
the ignition switch position.
To release the parking brake, pull the
electric parking brake handle
toward
you while the ignition is on. The parking
brake will be automatically released when
you depress the accelerator pedal as long
as certain conditions are met, such as
having your seatbelt fastened.
Please see your Owner’s Manual for important safety
information, system limitations, and additional operating
and feature information.
Parking Brake

12
Electronic Shift Lever
Fuel-filler Door
To open the fuel-filler door,
unlock the vehicle and
gently push the front side
of the fuel-filler door.
Please see your Owner’s Manual
for important safety information,
system limitations, and additional
operating and feature information.
Opening the Liftgate
To open the liftgate,
press the
button on the
Intelligent Key and then
press the liftgate release
. The liftgate also
automatically unlocks if you
are carrying the Intelligent
Key and press the liftgate
request switch
.
Please see your Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
To put the vehicle in N (Neutral):
Push the electronic shift lever forward
until you feel resistance and release the
shift lever, or pull the electronic shift lever
back until you feel resistance and release
the shift lever.
To put the vehicle in R (Reverse):
Push the electronic shift lever forward
past the point of resistance and release
the shift lever.
To put the vehicle in D (Drive):
Pull the electronic shift lever back past
the point of resistance and release the
shift lever.
To put the vehicle in P (Park):
Make sure the vehicle is completely
stopped and press the P (Park) button
.
If you switch the ignition off with the transmission in D (Drive) or R (Reverse), the
transmission automatically shifts into N (Neutral).
If you open the driver’s door while the vehicle is stationary or moving at a very
low speed, the vehicle automatically switches into the P (Park) position.
Please see your Owner’s Manual for important safety information, system limitations, and additional
operating and feature information.