alarm INFINITI QX50 2014 Quick Reference Guide

5
first drive features
INFINITI Intelligent Key System
The INFINITI Intelligent Key System allows you to lock or
unlock your vehicle, open your liftgate and start the engine.
It is important to make sure the Intelligent Key is with you
(that is, in your pocket or purse).
The operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch
01 or the liftgate request switch
02 or press

the
button
03 on the key fob.
To unlock the vehicle, perform one of the

following procedures:
•
Push

either door handle request switch
01 or the

liftgate request switch 02 ; the corresponding door will unlock.

Push the door handle request switch 01 or the liftgate request

switch 02 again within 1 minute; all other doors will unlock, or
•
Press


the
button
04 on the key fob to unlock the driver’s side

door. Press the
button again; all other doors will unlock.
The Intelligent Key can also be used to activate the p
anic alarm by
pressing and holding the
button
05 for more than 1 second. Once

activated, the panic alarm and headlights will stay on for a period of t\
ime.
INFINITI INTELLIGENT KEY BATTERY DIS
c
HARGE
If the battery in the Intelligent Key is almost discharged,
the guide light
06 of the Intelligent Key port blinks and

the Intelligent Key insertion indicator 07 is displayed

in the vehicle information display.
To start the engine under these circumstances, insert
the Intelligent Key into the key port with the keyring
side facing backward until it latches into place. Then
push the ignition switch to start the engine.
To remove the Intelligent Key from the port, push the
ignition switch to turn the engine off and then pull the
Intelligent Key out of the port.
The Intelligent Key port does not charge the Intelligent
Key battery. If you see the Intelligent Key warning light

08 , replace the battery in the Intelligent Key.
Do not insert the mechanical key or other objects into

the key port because it will damage the key port.
For more information, refer to the “pre-driving checks and adjustments
(section 3)”, “Starting and driving (section 5 )” and the “Maintenance
and do-it yourself (section 8)” of your Owner’s Manual.
01
02
03
04
05
F E
07
08
06
1378280_14a_Infiniti_QX50_QRG_060613.indd 56/6/13 10:21 AM

23
HomeLink® Universal Transceiver
The HomeLink® system can learn and consolidate
the functions of up to 3 different hand-held
transmitters, operating items such as garage doors,
property gates, outdoor and indoor lights or
alarm systems.
To program the Homelink® Universal Transceiver:
•
Position


the

handheld

transceiver 1-3 in (26-76
mm) away from the Homelink® surface, keeping the Homelink® indicator light in view.
•
Press


and

hold

the

desired

Homelink
® button and the handheld transmitter button
simultaneously until the Homelink® indicator light flashes slowly and then rapidly.
•
Both


buttons

may

be

released

when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the Homelink® and observe the
indicator light:
•
A


solid


continuous


light


indicates


the


programing


is


complete


and

the

Homelink® button
will activate your device.
•
A


blinking

light

that

turns

to

a

solid

continuous

light

after

2

seconds

indicates

additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete th\
e
programing process:

•
At
the receiver of the device that you are programing to the Homelink
®, press and
release the “learn” or “smart” button (the name may vary by\
manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit). You have
approximately 30 seconds to initiate the following step.
•
Press


and

hold

the

programmed

Homelink
® button for 2 seconds and release.
Repeat the previous 2 steps up to 3 times to complete the programming pr\
ocess.
Homelink® should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website at
www.homelink.com or call 1-800-355-3515.
HOMELINK®
1378280_14a_Infiniti_QX50_QRG_060613.indd 236/6/13 10:22 AM