door lock INFINITI QX50 2014 Quick Reference Guide

4
essential information
Loose Fuel Cap
A LOOS
e F ue L CA p warning message will appear in
the vehicle information display
01 when the

fuel-filler cap is not tightened correctly.
To tighten, turn the cap clockwise until a single click
is heard.
The warning message will disappear when the vehicle
detects the fuel-filler cap is properly tightened and the
reset button
02 is pressed.
If the cap is not properly tightened, the Malfunction

Indicator Light
may illuminate.
For more information, refer to the “Instruments and controls (section 2)” and

the “ p re-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
02
Front Armrest/Center Console Storage Box
To access the center console storage box, push
the button
01.
For more information, refer to the “Instruments and controls (section 2)”
of your Owner’s Manual.
01
Fuel-Filler Door
Unlock the fuel-filler door using one of the following
operations, then push and release the left side of the
door to open.
Push either door handle request switch or the liftgate
request switch while carrying the INFINITI Intelligent
Key with you.
Press the UNLO c K button on the Intelligent Key.
Push the power door lock switch to the
UNLO
c K position.
For more information, refer to the “pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1378280_14a_Infiniti_QX50_QRG_060613.indd 46/6/13 10:21 AM

5
first drive features
INFINITI Intelligent Key System
The INFINITI Intelligent Key System allows you to lock or
unlock your vehicle, open your liftgate and start the engine.
It is important to make sure the Intelligent Key is with you
(that is, in your pocket or purse).
The operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch
01 or the liftgate request switch
02 or press

the
button
03 on the key fob.
To unlock the vehicle, perform one of the

following procedures:
•
Push

either door handle request switch
01 or the

liftgate request switch 02 ; the corresponding door will unlock.

Push the door handle request switch 01 or the liftgate request

switch 02 again within 1 minute; all other doors will unlock, or
•
Press


the
button
04 on the key fob to unlock the driver’s side

door. Press the
button again; all other doors will unlock.
The Intelligent Key can also be used to activate the p
anic alarm by
pressing and holding the
button
05 for more than 1 second. Once

activated, the panic alarm and headlights will stay on for a period of t\
ime.
INFINITI INTELLIGENT KEY BATTERY DIS
c
HARGE
If the battery in the Intelligent Key is almost discharged,
the guide light
06 of the Intelligent Key port blinks and

the Intelligent Key insertion indicator 07 is displayed

in the vehicle information display.
To start the engine under these circumstances, insert
the Intelligent Key into the key port with the keyring
side facing backward until it latches into place. Then
push the ignition switch to start the engine.
To remove the Intelligent Key from the port, push the
ignition switch to turn the engine off and then pull the
Intelligent Key out of the port.
The Intelligent Key port does not charge the Intelligent
Key battery. If you see the Intelligent Key warning light

08 , replace the battery in the Intelligent Key.
Do not insert the mechanical key or other objects into

the key port because it will damage the key port.
For more information, refer to the “pre-driving checks and adjustments
(section 3)”, “Starting and driving (section 5 )” and the “Maintenance
and do-it yourself (section 8)” of your Owner’s Manual.
01
02
03
04
05
F E
07
08
06
1378280_14a_Infiniti_QX50_QRG_060613.indd 56/6/13 10:21 AM