low beam INFINITI QX50 2014 Quick Reference Guide

8
first drive features
Starting/Stopping the Engine
It is important to make sure the INFINITI Intelligent
Key is with you (that is, in your pocket or purse).
Depress the brake pedal.

•
If
the brake pedal is not depressed, pushing the

ignition switch once enters the

ACC mode.
•
If

the ignition switch is pushed a second time, the

vehicle will enter the

ON mode.
Move the shift lever to p ( p A rk ).
Push the ignition switch to start the engine.
TURNING THE ENGINE OFF
Move the shift lever to the p ( p A rk ) position and apply the parking brake.
Press the ignition switch S t A rt /S t O p button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control Switch
HEADLIGHT cONTROL
Turn the headlight control switch to the
position 01 to turn on the front parking, side

marker, tail, license plate and instrument panel
lights. Turn the switch to the
position
02 to turn

on the headlights.
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it i\
s dark and off when
it is light. The system will keep the headlights on for a period of time\
after you turn the
ignition off and all doors are closed.
To activate the autolight system, turn the headlight control switch to t\
he A ut O position
03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
01 or
position
02.
HIGH BEAM SELE
c
T
Push the headlight control switch forward 04 to

select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator light goes off.
Pull and release the headlight control switch 05 to

flash the headlight high beams on and off.
03
01
02
04
05
1378280_14a_Infiniti_QX50_QRG_060613.indd 86/6/13 10:21 AM

9
Windshield Wiper and Washer Switch
Move the lever to the following positions to operate
the windshield wipers:
01 Mist (MIS t ) - One sweep operation of the
front wipers.
02 Intermittent (IN t ) - Operates the speed-sensing
front wipers intermittently. The intermittent
operation speed can be adjusted by twisting
the time control ring
03 towards you to

decrease wiper delay.
04 Low (LO) - Front wipers operate at a continuous
low-speed.
05 High ( h I) - Front wipers operate at a continuous
high-speed.
06 Front w asher
- Pull the lever toward you to

activate the front washer. The front wipers will
operate several times.
REAR
w
INDSHIELD
w
IPER AND w ASHER
07 Intermittent (IN t ) - Rear wiper operates
intermittently.
08 Low (ON) - Rear wiper operates at a continuous
low-speed.
09 Rear w asher
- Push the lever forward to

activate the rear washer. The rear wiper will
operate several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
FOG LIGHT SwITcH
The headlights must be in the auto, or the low
beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar) to the
OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
06
INt
ON
MISt
OFF
IN

t
LO
h

I01
02
06
07
04
09
08
05
03
1378280_14a_Infiniti_QX50_QRG_060613.indd 96/6/13 10:21 AM