alarm INFINITI QX50 2015 Quick Reference Guide

7
first drive features
INFINITI Intelligent Key System
The INFINITI Intelligent Key System allows you to lock or
unlock your vehicle, open your liftgate and start the engine.
It is important to make sure the Intelligent Key is with you
(that is, in your pocket or purse).

The operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.

To lock the vehicle, push either door handle request
switch
1 or the liftgate request switch 2
or press

the
button 3
on the key fob.

To unlock the vehicle, perform one of the
following procedures:
• Push either door handle request switch
1 or the

liftgate request switch 2; the corresponding door will unlock.
Push the door handle request switch
1 or the liftgate request

switch 2 again within 1 minute; all other doors will unlock, or
• Press the

button
4 on the key fob to unlock the driver’s side

door. Press the button again; all other doors will unlock.

The Intelligent Key can also be used to activate the panic alarm by
pressing and holding the
button 5 for more than 1 second. Once

activated, the panic alarm and headlights will stay on for a period of t\
ime.
INFINITI INTELLIGENT KEY BATTERY DISCHARGE

If the battery in the Intelligent Key is almost discharged,
the guide light
6 of the Intelligent Key port blinks and

the Intelligent Key insertion indicator 7 is displayed

in the vehicle information display.

To start the engine under these circumstances, insert
the Intelligent Key into the key port with the key ring
side facing backward until it latches into place. Then
push the ignition switch to start the engine.

To remove the Intelligent Key from the port, push the
ignition switch to turn the engine off and then pull the
Intelligent Key out of the port.

The Intelligent Key port does not charge the Intelligent
Key battery. If you see the Intelligent Key warning light
8, replace the battery in the Intelligent Key.

Do not insert the mechanical key or other objects into
the key port because they will damage the key port.

For more information, refer to the “Pre-driving checks and adjustments
(section 3)”, “Starting and driving (section 5)” and the “Maintenance
and do-it-yourself (section 8)” of your Owner’s Manual.F E
1
2
3
4
5
6
7
8
1923534_15c_Infiniti_QX50_QRG_122314.indd 712/23/14 1:04 PM

25
HomeLink® Universal Transceiver (if so equipped)
The HomeLink® Universal Transceiver can learn
and consolidate the functions of up to 3 different
hand-held transmitters, operating items such as
garage doors, property gates, outdoor and indoor
lights or alarm systems.

To program the Homelink® Universal Transceiver:
• Position the handheld transceiver 1-3 in (26-76
mm) away from the HomeLink surface, keeping the HomeLink indicator ligh\
t in view.
• Press and hold the desired HomeLink button and the handheld transmitter \
button
simultaneously until the HomeLink indicator light flashes slowly and the\
n rapidly.
• Both buttons may be released when the indicator light flashes rapidly.

To verify the programing is complete, press and hold the HomeLink button\
and observe the
indicator light:
• A solid, continuous light indicates the programing is complete and the H\
omeLink button
will activate your device.
• A blinking light that turns to a solid, continuous light after 2 seconds\
indicates additional
steps are required to complete the programing.

An additional person may make the remaining steps easier. To complete th\
e
programing process:
• At the receiver of the device that you are programing to the HomeLink, p\
ress and
release the “learn” or “smart” button (the name may vary by\
manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit). You have
approximately 30 seconds to initiate the following step.
• Press and hold the programed HomeLink button for 2 seconds and release.

You may have to repeat the previous 2 steps up to 3 times to complete th\
e programing
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
HOMELINK
1923534_15c_Infiniti_QX50_QRG_122314.indd 2512/23/14 1:05 PM