wheel INFINITI QX50 2015 Quick Reference Guide

*See your Owner’s Manual for information.
Behind
steering wheel Behind
steering wheel
On
steering column
Behind
steering wheel
1 INSTRUMENT BRIGHTNESS CONTROL SWITCH*
2
VEHICLE INFORMATION DISPLAY
3 TRIP COMPUTER SWITCHES
4 LOW TIRE PRESSURE WARNING LIGHT
5
HEADLIGHT AND TURN SIGNAL CONTROL
6 WINDSHIELD WIPER AND WASHER SWITCH
7 STEERING WHEEL SWITCHES FOR
AUDIO* / BLUETOOTH® / NAVIGATION
8 INTELLIGENT CRUISE CONTROL BUTTONS
9 PUSH BUTTON IGNITION
10 WARNING SYSTEMS SWITCH*
11 INTELLIGENT BRAKE ASSIST (IBA)
OFF SWITCH*
12 DYNAMIC DRIVER ASSISTANCE SWITCH*
13 INTELLIGENT KEY PORT
14 TILT / TELESCOPIC STEERING
WHEEL SWITCH*
15 HOOD RELEASE*

16 VEHICLE DYNAMIC CONTROL (VDC)
OFF SWITCH*
17 CONTROL PANEL DISPLAY SCREEN*
18 AUDIO SYSTEM
19 AUTOMATIC CLIMATE CONTROLS
20 FRONT PASSENGER AIR BAG
STATUS LIGHT*
13
4
56
789
101112
1314
1516
17
18
19
20
2
1923534_15c_Infiniti_QX50_QRG_122314.indd 312/23/14 1:04 PM

4
Blind Spot Warning (BSW) System (if so equipped)
The control switch is located on the left side of the
instrument panel.

The system automatically turns on when the
engine is started and the indicator light on the
switch
1 illuminates.

The BSW indicator lights
2, located next to the

outside mirrors, will activate when the BSW system
detects a vehicle in the detection zone.

If the turn signal is activated in the direction of a
detected vehicle, a chime sounds twice and the BSW
indicator light will flash.

To cancel the system, push the control switch and the
warning systems ON indicator will extinguish.
For more information, refer to the “Instruments and controls (section 2)” and
the “Starting and driving (section 5)” of your Owner’s Manual.
new system features
1
2
Lane Departure Prevention (LDP) System
(if so equipped)
This system will help you return the vehicle to the
center of the traveling lane by applying brake control
to the left or right wheels individually (for a short
period of time).
For more information, refer to the “Starting and driving (section 5)” of your
Owner’s Manual.
1923534_15c_Infiniti_QX50_QRG_122314.indd 412/23/14 1:04 PM

21
RECEIVING/ENDING A CALL


To accept the call, press the button on the steering
wheel or touch the “Answer” key.

To reject the call, touch the “Reject Call” key.

To hang-up, press the button or touch the

“Hang Up” key.
Bluetooth® System without Navigation* (if so equipped)
PAIRING PROCEDURE
1. Press the

button on the steering wheel.

The system announces the available commands.
2. Say: “Connect Phone”. The system acknowledges
the command and announces the next set of
available commands.
3. Say: “Add Phone”. The system acknowledges the
command and asks you to initiate connecting from the
phone handset.
4. Initiate pairing from the phone.
• The connecting procedure varies according to each cellular phone model.
For detailed connecting instructions and a list of compatible phones, pl\
ease
visit www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN code, enter “1234” from the handset. (The\
PIN code is assigned by
INFINITI and cannot be changed.)
5. Say a name for the phone when the system asks you to provide one. You ca\
n give the phone a
name of your choice.
PHONEBOOK

Depending on the phone, the system may automatically download the entire\
phonebook.
For more information, please visit www.InfinitiUSA.com/bluetooth or the cellular phone’s
Owner’s Manual.

If the phonebook does not download automatically, 40 entries can be indi\
vidually downloaded.
To manually download entries:
1. Press the

button on the steering wheel.
2. After the tone, say “Phonebook”.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
1923534_15c_Infiniti_QX50_QRG_122314.indd 2112/23/14 1:05 PM

22
system guide
3. After the next tone, say “Transfer Entry”.
4. Using the phone, select an entry to send to the vehicle. Please consult \
the website above or
your cellular phone’s Owner’s Manual for specific steps of the pho\
ne.
5. The system will speak the transferred entry. Confirm the entry by saying\
“Yes” after the tone.
CALLING A PHONEBOOK ENTRY:

In some cases, names stored using all UPPERCASE letters may not be recog\
nized by the voice
recognition system.
1. Press the

button.
2. After waiting for the tone, say “Call”.
3. After the next tone, speak a name of a phonebook entry. For example, “\
Michael Smith”.
4. Confirm the correct name is recognized by saying “Dial” after the \
tone.
MAKING A CALL:
1. Press the

button.
2. After waiting for the tone, say “Call”.
3. After the next tone, say “Phone Number”.
4. After the next tone, say “123-456-7890”.
• You may also say the digits in groups of 3, 3 and 4, respectively. To us\
e this group dialing
method, say only the first 3 digits of the phone number instead of all 1\
0 digits. After the
system recognizes the digits, it will request the next 3 digits and fina\
lly the last 4 digits.
5. After the system speaks the correct number and sounds the tone, say “\
Dial”.
RECEIVING/ENDING A CALL

To accept the call, press the
button on the steering wheel.

To reject the call, press the button.

To hang-up, press the button.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4\
)” of your Owner’s Manual
or please visit www.InfinitiUSA.com/bluetooth.
1923534_15c_Infiniti_QX50_QRG_122314.indd 2212/23/14 1:05 PM