19
ProPILOT Assist (if so equipped)
To set ProPILOT Assist, push the ProPILOT Assist
switch
on the steering wheel. The ProPILOT
Assist status will appear on the vehicle
information display. When the desired cruising speed
is reached push the SET- switch
and release it.
PROPILOT INTELLIGENT CRUISE CONTROL
To accelerate or decelerate your vehicle to the desired
speed, push the RES+ switch
or SET- switch
and release it.
When a vehicle is detected in the lane ahead, the
Intelligent Cruise Control system controls the vehicle
speed based on the distance set by the driver.
To cancel a set speed, push the CANCEL switch
on the steering wheel or tap the brake pedal.
To turn the system off, push the ProPILOT Assist
switch
.
STOP-HOLD FEATURE:
When the vehicle ahead decelerates to stop, your
vehicle decelerates to a standstill if the ProPilot
Assist is activated. Once the vehicle stops, the system
will keep the vehicle stopped.
When the vehicle ahead accelerates, push and release
the RES+ switch
or the accelerator pedal. This will
resume the last set cruising speed.
ProPILOT Assist allows you to maintain gap and
“STOP-HOLD
” in-between vehicles while also
helping to keep you in the center of your lane.
PROPILOT ASSIST DISPLAY
Set vehicle speed indicator: Displays the speed set by the driver.
Steering Assist indicator: Shows whether
steering assist is active or inactive
(green-active, grey-standby).
Lane marker indicator: Appears green on
the display when lane lines are detected and
steering assist is active.
ProPILOT Assist status indicator: Displays
whether ProPILOT Assist is engaged or not.
Vehicle ahead detection indicator: Appears on
the display when a vehicle is detected ahead.
Set distance indicator: Displays the gap
amount between the vehicle and the preceding
vehicle as set by driver (1 bar - shortest gap,
3 bars - longest gap).
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information.
