cargo INFINITI QX56 2006 Factory User Guide

THIRD SEATSE-105
C
DE
F
G H
J
K L
M A
B
SE
Revision: November 2009 2006 QX56
THIRD SEATPFP:88000
LH Side SeatEIS007WZ
REMOVAL
1. Remove the storage bin. Refer to EI-40, "LUGGAGE FLOOR TRIM" .
2. Remove the lower base trim covers.
3. Remove front link nuts and the LH hinge front bolt.
4. Remove push pin (2) and release elastic ban (3) from seat frame (1).

⇐: Vehicle front
5. Partially lift seatback upright, then remove seat belt buckle (2) from between hinge cover (1) and seat cushion side facing (3).

⇐: Vehicle front
6. Retract the seat into the cargo floor position.
7. Remove the (A) seat hinge rear bolt and (B) seat belt buckle bolt from the seat assembly.
8. Remove the seat assembly.
INSTALLATION
Installation is in the reverse order of removal. Front link nuts : 45 N·m (4.6 Kg-m, 33 ft-lb)
LH hinge front bolt : 45 N·m (4.6 Kg-m, 33 ft-lb)
LIIA2324E
LIIA2370E
LIIA2371E
Seat hinge rear bolt : 45 N·m (4.6 Kg-m, 33 ft-lb)
Seat belt buckle bolt : 50 N·m (5.1 Kg-m, 37 ft-lb)
LIIA2325E

THIRD SEATSE-107
C
DE
F
G H
J
K L
M A
B
SE
Revision: November 2009 2006 QX56
RH Side SeatEIS007X0
REMOVAL
1. Remove the storage bin. Refer to EI-40, "LUGGAGE FLOOR TRIM" .
2. Remove the lower base trim covers.
3. Remove (A) front link nuts and (B) RH hinge front bolt.
4. Remove push pin (2) and release elastic ban (3) from seat frame (1).

⇐: Vehicle front
5. Partially lift seatback upright, then remove seat belt buckle (2) from between hinge cover (1) and seat cushion side facing (3).

⇐: Vehicle front
6. Retract the seat into the cargo floor position.
7. Remove the rear bolts from the seat assembly.
8. Remove the seat assembly.
1. LH 3rd seat assembly 2. Seatback assembly 3. Seatback trim cover
4. Seat cushion assembly 5. Seat cushion pad 6. Seat cushion trim cover
7. Flex mat springs 8. Flex mat 9. Front link covers
10. RH hinge cover 11. Seat cushion frame 12. LH hinge cover
13. Seatback frame assembly 14. Seatback cable assembly 15. Release handle bezel
16. Seatback board 17. Seatback pad 18. Headrest holder, locking
19. Headrest holder, free 20. Headrest
Front link nuts : 45 N·m (4.6 Kg-m, 33 ft-lb)
RH hinge front bolt : 45 N·m (4.6 Kg-m, 33 ft-lb)
LIIA2326E
LHIA0105E
Seat hinge rear bolt : 45 N·m (4.6 Kg-m, 33 ft-lb)
LHIA0106E
LIIA2327E

WW-2Revision: November 20092006 QX56
Preliminary Inspection .........................................
... 40
INSPECTION FOR POWER SUPPLY AND
GROUND CIRCUIT .......................................... ... 40
CONSULT-II Function (BCM) ............................... ... 42
CONSULT-II OPERATION ................................ ... 42
DATA MONITOR ............................................... ... 43
ACTIVE TEST .................................................. ... 43
Rear Wiper Does Not Operate ............................... 44
Rear Wiper Stop Position Is Incorrect .................. ... 46
Only Rear Wiper Does Not Operate ....................... 47
Only Rear Wiper Intermittent Does Not Operate . ... 48
Wiper Does Not Wipe When Rear Washer Operates ... 48
Rear Wiper Arm ................................................... ... 49
REMOVAL AND INSTALLATION ...................... ... 49
INSTALLATION ................................................. ... 49
Rear Wiper Motor ................................................... 50 REMOVAL AND INSTALLATION ...................... ... 50
REMOVAL ........................................................ ... 50
INSTALLATION ................................................ ... 50
Rear Washer Nozzle Adjustment ......................... ... 50
Rear Washer Tube Layout ................................... ... 51Rear Washer Nozzle ............................................
... 51
REMOVAL AND INSTALLATION ...................... ... 51
INSTALLATION ................................................ ... 51
Removal and Installation ...................................... ... 51
REAR WIPER AND WASHER SWITCH ........... ... 51
WASHER FLUID RESERVOIR ......................... ... 52
WASHER MOTOR ............................................ ... 52
POWER SOCKET .................................................. ... 53
Wiring Diagram — P/SCKT — ............................. ... 53
Front Power Socket LH, Rear Cargo Power Socket ... 54
REMOVAL AND INSTALLATION ...................... ... 54
INSTALLATION ................................................ ... 54
Front Power Socket RH (For Cigarette Lighter),
Console Power Socket ......................................... ... 54
REMOVAL ........................................................ ... 54
INSTALLATION ................................................ ... 54
HORN ..................................................................... ... 55
Wiring Diagram — HORN — ............................... ... 55
Removal and Installation ...................................... ... 56
REMOVAL ......................................................... ... 56
INSTALLATION ................................................. ... 56

WW-54
POWER SOCKET
Revision: November 20092006 QX56
Front Power Socket LH, Rear Cargo Power SocketEKS00BEX
REMOVAL AND INSTALLATION
Removal
1. Disconnect battery negative terminal.
2. Remove inner socket from the ring, while pressing the hook on
the ring out from square hole.
3. Disconnect power socket connector.
4. Remove ring from power socket finisher while pressing pawls.
INSTALLATION
Installation is in the reverse order of removal.
Front Power Socket RH (For Cigarette Lighter), Console Power SocketEKS00GBK
REMOVAL
1. Remove inner socket from the ring, while pressing the hook on the ring out from square hole.
2. Disconnect power socket connector.
3. Remove ring from power socket finisher while pressing pawls.
INSTALLATION
Installation is in the reverse order of removal.
WKIA1035E
WKIA1035E