ECU INFINITI QX56 2009 Factory Workshop Manual

BCM (BODY CONTROL MODULE)ADP-153
< ECU DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
58 W/R Optical sensor Input ON When optical sensor is illumi-
nated
3.1V or more
When optical sensor is not illu-
minated 0.6V or less
59 G Front door lock as-
sembly LH actuator
(unlock) Output OFF
OFF (neutral) 0V
ON (unlock) Battery voltage
60 G/B Turn signal (left) Output ON Turn left ON
61 G/Y Turn signal (right) Output ON Turn right ON
62 R/W Step lamp LH and RH Output OFF ON (any door open) 0V
OFF (all doors closed) Battery voltage
63 L Interior room/map
lamp Output OFFAny door
switchON (open) 0V
OFF (closed) Battery voltage
65 V All door lock actuators
(lock) Output OFFOFF (neutral) 0V
ON (lock) Battery voltage
66 G/Y Front door lock actua-
tor RH, rear door lock
actuators LH/RH and
back door lock actua-
tor (unlock) Output OFF
OFF (neutral) 0V
ON (unlock) Battery voltage
67 B Ground Input ON — 0V
68 W/L Power window power
supply (RAP) Output —Ignition switch ON Battery voltage
Within 45 seconds after igni-
tion switch OFF
Battery voltage
More than 45 seconds after ig-
nition switch OFF 0V
When front door LH or RH is
open or power window timer
operates 0V
69 W/R Power window power
supply
Output — — Battery voltage
70 W/B Battery power supply Input OFF — Battery voltage
Te r m i n a l
Wire
color Signal name Signal
input/
output Measuring condition
Reference value or waveform
(Approx.)
Ignition
switch Operation or condition
SKIA3009J
SKIA3009J
Revision: December 20092009 QX56

ADP-154
< ECU DIAGNOSIS >
BCM (BODY CONTROL MODULE)
Wiring Diagram
INFOID:0000000004064160
AAMWA0236GB
Revision: December 20092009 QX56

BCM (BODY CONTROL MODULE)ADP-155
< ECU DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
ABMWA0015GB
Revision: December 20092009 QX56

ADP-156
< ECU DIAGNOSIS >
BCM (BODY CONTROL MODULE)
AAMWA0237GB
Revision: December 20092009 QX56

BCM (BODY CONTROL MODULE)ADP-157
< ECU DIAGNOSIS >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
ABMIA0023GB
Revision: December 20092009 QX56

ADP-158
< ECU DIAGNOSIS >
BCM (BODY CONTROL MODULE)
ABMIA0024GB
Revision: December 20092009 QX56

PRECAUTIONSADP-163
< PRECAUTION >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
5. When the repair work is completed, return the ignition switch to the ″LOCK ″ position before connecting
the battery cables. (At this time, the steering lock mechanism will engage.)
6. Perform a self-diagnosis check of al l control units using CONSULT-III.
Precaution for WorkINFOID:0000000003775660
 When removing or disassembling each component, be ca reful not to damage or deform it. If a component
may be subject to interference, be sure to protect it with a shop cloth.
 When removing (disengaging) components with a screwdriver or similar tool, be sure to wrap the component
with a shop cloth or vinyl tape to protect it.
 Protect the removed parts with a shop cloth and keep them.
 Replace a deformed or damaged clip.
 If a part is specified as a non-reusable part, always replace it with new one.
 Be sure to tighten bolts and nuts securely to the specified torque.
 After re-installation is completed, be sure to check that each part works normally.
 Follow the steps below to clean components.
- Water soluble foul: Dip a soft cloth into lukewarm water, and wring the water out of the cloth to wipe the fouled area.
Then rub with a soft and dry cloth.
- Oily foul: Dip a soft cloth into lukewarm water with mild detergent (concentration: within 2 to 3%), and wipe
the fouled area.
Then dip a cloth into fresh water, and wring the water out of the cloth to wipe the detergent off. Then rub with
a soft and dry cloth.
 Do not use organic solvent such as thinner, benzene, alcohol, or gasoline.
 For genuine leather seats, use a genuine leather seat cleaner.
Revision: December 20092009 QX56

AV
AV-3
C
DE
F
G H
I
J
K L
M B
A
O P
Description ..........................................................
....
80
Diagnosis Procedure ...............................................80
RGB AREA (YS) SIGNAL CIRCUIT ..................81
Description .......................................................... ....81
Diagnosis Procedure ...............................................81
HORIZONTAL SYNCHRONIZING (HP) SIG-
NAL CIRCUIT ................................................. ....
82
Description .......................................................... ....82
Diagnosis Procedure ...............................................82
VERTICAL SYNCHRONIZING (VP) SIGNAL
CIRCUIT ......................................................... ....
83
Description .......................................................... ....83
Diagnosis Procedure ...............................................83
FRONT DOOR SPEAKER .................................84
Description .......................................................... ....84
Diagnosis Procedure ...............................................84
FRONT TWEETER .............................................87
Description .......................................................... ....87
Diagnosis Procedure ...............................................87
CENTER SPEAKER ...........................................90
Description .......................................................... ....90
Diagnosis Procedure ...............................................90
REAR DOOR SPEAKER ....................................92
Description .......................................................... ....92
Diagnosis Procedure ...............................................92
REAR DOOR TWEETER ...................................95
Description .......................................................... ....95
Diagnosis Procedure ...............................................95
BACK DOOR SPEAKER ...................................98
Description .......................................................... ....98
Diagnosis Procedure ...............................................98
SUBWOOFER ..................................................101
Description .......................................................... ..101
Diagnosis Procedure .............................................101
AMP ON SIGNAL CIRCUIT .............................104
Description .......................................................... ..104
Diagnosis Procedure .............................................104
STEERING SWITCH ........................................105
Description .......................................................... ..105
Diagnosis Procedure .............................................105
MICROPHONE SIGNAL CIRCUIT ...................107
Description .......................................................... ..107
Diagnosis Procedure .............................................107
ECU DIAGNOSIS .......................................109
AV CONTROL UNIT ....................................... ..109
Reference Value ................................................. ..109
Wiring Diagram .....................................................115
DTC Index ........................................................... ..143
DISPLAY UNIT ................................................145
Reference Value ....................................................145
BOSE SPEAKER AMP ...................................148
Reference Value ....................................................148
REAR VIEW CAMERA CONTROL UNIT .......151
Reference Value ....................................................151
DVD PLAYER ..................................................153
Reference Value ....................................................153
SYMPTOM DIAGNOSIS ............................155
MULTI AV SYSTEM ........................................155
Symptom Table ................................................... ..155
NORMAL OPERATING CONDITION .............157
Description .............................................................157
PRECAUTION ............................................165
PRECAUTIONS ...............................................165
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ............................................................. ..
165
Precaution Necessary for Steering Wheel Rota-
tion After Battery Disconnect .................................
165
PREPARATION .........................................167
PREPARATION ...............................................167
Commercial Service Tools ................................... ..167
ON-VEHICLE REPAIR ...............................168
AV CONTROL UNIT ........................................168
Removal and Installation ..................................... ..168
DISPLAY UNIT ................................................170
Removal and Installation .......................................170
FRONT TWEETER ..........................................171
Removal and Installation .......................................171
CENTER SPEAKER ........................................172
Removal and Installation .......................................172
FRONT DOOR SPEAKER ..............................173
Removal and Installation .......................................173
REAR DOOR SPEAKER ................................174
Removal and Installation .......................................174
BACK DOOR SPEAKER ................................175
Removal and Installation .......................................175
SUBWOOFER .................................................176
Removal and Installation .......................................176
DVD PLAYER ..................................................177
Removal and Installation .......................................177
Revision: December 20092009 QX56

AV-38
< FUNCTION DIAGNOSIS >[AUDIO SYSTEM]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
Deletes any unit connection records and error records from the AV
control unit memory. (Clear the records of the unit that has been
removed)
Inititialize Settings
Initializes the AV control unit memory.
AV CONTROL UNIT : CONSULT-III FunctionINFOID:0000000003776789
CONSULT-III can display each diagnostic item us
ing the diagnostic test modes shown following.
Self-diagnosis results
• In CONSULT-III self-diagnosis, self-diagnosis results and error history are displayed collectively.
• The current malfunction indicates “CRNT”. The past malfunction indicates “PAST”.
• The timing is displayed as “0” if any of the error codes [U1000], [U1010], [U1300] and [U1310] is detected.
The counter increases by 1 if the condition is normal at the next ignition switch ON cycle.
Self-diagnosis results display item
ALNIA0239GB
ALNIA0240GB
MULTI AV diagnosis mode Description
SELF-DIAG RESULTS Displays AV control unit self-diagnosis results.
DATA MONITOR Displays AV control unit input/output data in real time.
CAN DIAG SUPPORT MNTR The result of transmit/receive diagnosis of CAN communication can be read.
AV COMM MONITOR Allows the technician to monitor the status of the Multi AV system communication signals.
ECU PART NUMBER The part number of AV control unit can be checked.
Error item DescriptionPossible malfunction factor/Action to take
CAN COMM CIRCUIT[U1000] CAN communication malfunction is detect-
ed.Perform diagnosis with CONSULT-III, and
then repair the malfunctioning parts accord-
ing to the diagnosis results.
Refer to
AV- 3 8 , "
AV CONTROL UNIT :
CONSULT-III Function".
Revision: December 20092009 QX56

AV
AV CONTROL UNITAV-109
< ECU DIAGNOSIS > [AUDIO SYSTEM]
C
D
E
F
G H
I
J
K L
M B A
O P
ECU DIAGNOSIS
AV CONTROL UNIT
Reference ValueINFOID:0000000003776891
VALUES ON THE DIAGNOSIS TOOL
CONSULT-III data monitor item
TERMINAL LAYOUT
PHYSICAL VALUES
Display Item Dis-
play Vehicle status
Remarks
VHCL SPD SIG ON Vehicle speed >0 km/h (0 MPH)
Changes in indication may be delayed. This is
normal.
OFF Vehicle speed =0 km/h (0 MPH)
PKB SIG ON Parking brake is applied.
Changes in indication may be delayed. This is
normal.
OFF Parking brake is released.
ILLUM SIG ON
Block the light beam from the auto
light optical sensor when the light
SW is ON.
—
OFF Expose the auto light optical sensor
to light when the light SW is OFF or
ON.
IGN SIG ON Ignition switch ON
—
OFF Ignition switch in ACC position
REV SIG ON Selector lever in R position
Changes in indication may be delayed. This is
normal.
OFF Selector lever in any position other
than R
ALNIA0670GB
Te r m i n a l
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
1
(GR/L) Ground Amp. ON signal
OutputIgnition
switch ON —
Battery voltage
2
(LG) 3
(V) Pre-amp. audio signal front
LH
OutputIgnition
switch ON Audio output
SKIB3609E
Revision: December 20092009 QX56