navigation INFINITI QX60 HYBRID 2014 Navigation Manual

6. Highlight the preferred item and push.
Available setting items . [Voice Announcements]:
Sets how many times the voice gui-
dance is announced before the vehicle
reaches an intersection.
1. Highlight [Voice Announcements] and push .
2. Highlight the preferred item and push .
.[Full]:
The system announces three kinds
of voice guidance: “Turning Point”,
“1 Guide” and“2 Guide”.
.[Concise]:
The system announces two kinds of
voice guidance: “Turning Point”and
“1 Guide”. .
[Turning Point]:
Turns on the sound that chimes when a
maneuver is supposed to be occurring.
DISPLAYING SMALL TURN ARROW
ON MAP
The guidance screen displayed when the
vehicle passes through an intersection can
be changed.
1. Push .
2. Highlight [Navigation] and push .
3. Highlight [Guidance Settings] and push .
4. Highlight [Guidance Display Settings]and push .
5. Highlight [Small Turn Arrow on Map]
and push to activate or deac-
tivate Small Turn Arrow on the Map
(simplified turn indicator) displayed in
the upper left corner of the map screen.
The indicator illuminates if the Small
Turn Arrow on the Map is displayed.
SWITCHING ESTIMATED ARRIVAL
TIME DISPLAY
The display of the travel time on the map
screen can be switched between the travel
time to the destination and the travel time
to the waypoint.
Example: Switching the display to the
travel time to the waypoint
1. Push .
2. Highlight [Navigation] and push .
5. Route guidance
5-29

5. Route guidance
5-30
3. Highlight [Guidance Settings] and push.
4. Highlight [Estimated Time] and push.
5. Highlight [Waypoint] and push .
The indicator for the selected condition
illuminates.
6. Push

6. Storing location/route
6-2
STORING LOCATION
Often visited locations can be stored in the
Address Book. The stored addresses can
be easily retrieved to set them as a
destination or waypoint.
INFO:
.
The Address Book can store up to 300
locations.
.New information placed in the same storage
position will overwrite the old data.
STORING LOCATION BY SEARCHING
After a location is searched for once, it can
be stored for future use.
1. Push .
2. Highlight [Navigation] and push
.
3. Highlight [Address Book] and push.
4. Highlight [Stored Location] and push
.
5. Highlight [Home Location (None)] or[Add New] and push .
6. Highlight the appropriate method to
search for a location and push .
“4. Setting destination”
7. When a preferred location is displayed
at the center of the map, confirm the
address of the location and push
.
A message is displayed, and the
address of the location is stored in
the Address Book.

STORING ROUTE
A maximum of 5 calculated routes can be
stored. Stored routes can be easily re-
trieved and set as the suggested route.
INFO:
Stored route includes only locations (destina-
tion and waypoints) and route calculation
conditions, not the route itself.
1. Push.
2. Highlight [Route Info] and push
.
3. Highlight [Store Route] and push.
4. A confirmation message is displayed.
Confirm the contents of the message,
highlight [Yes] and push .
The current route is stored.
OTHER SETTINGS
A route can also be stored using the
following procedure.
1. Push .
2. Highlight [Navigation] and push .
3. Highlight [Address Book] and push .
4. Highlight [Stored Routes] and push .
5. Highlight [Store Current Route] and push .
6. A confirmation message is displayed. Confirm the contents of the message,
highlight [Yes] and push . The
current route is stored.
6. Storing location/route
6-5

OTHER SETTINGS
A tracked route can also be stored using
the following procedure.
1. Push.
2. Highlight [Navigation] and push .
3. Highlight [Address Book] and push .
4. Highlight [Stored Tracking] and push .
5. Highlight [Add New] and push .
INFO:
A tracked route can only be stored using the
setting screen when [Current Tracking] is set to
on.
STORING AVOID AREA
An Avoid Area can be stored.
The Avoid Area is an area that can be
excluded from a route, such as a road that
is always congested. Once Avoid Areas are
stored, the system avoids those areas
when calculating a route. Up to 10 Avoid
Areas can be stored.
1. Push.
2. Highlight [Navigation] and push
.
3. Highlight [Address Book] and push.
4. Highlight [Avoid Area] and push
.
6. Storing location/route
6-7

6. Storing location/route
6-8
5. Highlight [Add New] and push.
INFO:
A maximum of 10 Avoid Areas can be
stored.
When 10 Avoid Areas are already stored, a
new Avoid Area cannot be stored until a
currently stored Avoid Area is deleted.
“Deleting stored item”(page 6-19)
6. Highlight the appropriate method to
search for a location and push .
“4. Setting destination”
7. Set the following items for the searched
location.
Available setting items:
.[Rename]:
Changes the name.
“Rename” (page 6-17)
.[Move Location]:
Adjusts the location of the Avoid
Area.
“Move Location” (page 6-17)
.[Resize Area]:
Adjusts the range of the Avoid Area.
“Resize Area” (page 6-17)
.[FWY]:
Avoids Freeways.
“FWY” (page 6-18)
.[Delete]:
Deletes the avoid area.
“Delete” (page 6-18)
8. After finishing the setting, highlight [OK] and push .
EDITING ADDRESS BOOK
Items stored in the Address Book can be
modified. These settings can be edited to
make the navigation system more useful.
BASIC OPERATION
1. Push.
2. Highlight [Navigation] and push .
3. Highlight [Address Book] and push .
4. Highlight the preferred item and push .
Available setting items . [Stored Location]:
Edits the information of a stored home
and Address.
“Editing stored home and ad-
dress” (page 6-9)

DELETING STORED ITEM
The locations and routes in the Address
Book can be deleted. Two deletion meth-
ods are available: deleting an individual
item and deleting all stored items.
NOTE:
Deleted items cannot be restored. Before
deleting an item, always make sure that the
item is truly not necessary.
DELETING STORED ITEM INDIVIDU-
ALLY
You can delete stored addresses, routes,
tracking and avoid areas individually.
1. Push.
2. Highlight [Navigation] and push .
3. Highlight [Address Book] and push.
Example: [Stored Location] is high-
lighted.
4. Highlight the preferred item for deletion and push .
5. Highlight the preferred location/route
for deletion and push .
6. Highlight [Delete] and push .
6. Storing location/route
6-19

6. Storing location/route
6-20
7. A confirmation message is displayed.Confirm the contents of the message,
highlight [Yes] and push . The
stored item is deleted from the Address
Book.
Other settings
A stored address can also be deleted using
the following procedure.
1. Push .
2. Highlight [Address Book] and push .
3. Highlight [Store/Edit] and push .
4. Highlight [Edit or Delete an Entry] and push .
5. Highlight a preferred address and push .
“4. Setting destination”
INFO:
This procedure applies only for deleting a stored
home or address. A stored route, tracking or
avoid area cannot be deleted using this
procedure.
DELETING INDIVIDUAL ITEM ON MAP
1. Align the cross pointer over the pre-ferred stored location for deletion by
moving on the map. Then push
.
2. Highlight [Delete] and push .
3. A confirmation message is displayed.
Confirm the contents of the message,
highlight [Yes] and push .
The stored item is deleted from the
Address Book.
DELETING ALL STORED ITEMS
1. Push .
2. Highlight [Navigation] and push .

6. Storing location/route
6-22
1. Push.
2. Highlight [Address Book] and push .
3. Highlight [Store/Edit] and push .
4. Highlight [Delete All Addressbook En- tries] and push .
“4. Setting destination”
INFO:
This procedure applies only for deleting a stored
home or address. A stored route, tracking or
avoid area cannot be deleted using this
procedure.
TRANSFERRING INFORMATION TO/FROM
ADDRESS BOOK
The information of the stored home and
addresses can be exported and imported
using a USB memory device.
INFO:
A USB memory can be used to transfer data but
it is not possible to edit data using a personal
computer, etc.
1. Insert a USB memory device and push
.
INFO:
Refer to the vehicle Owner’s Manual for the
location of the USB connector.
2. Highlight [Navigation] and push .
3. Highlight [Address Book] and push.
4. Highlight [Transfer Address Book] and
push .

7 Viewing technical information
Information screen............................................... 7-2Basic operation ............................................... 7-2
Infiniti Connection
TM(if so equipped)................... 7-3
Legal disclaimer .............................................. 7-3
Infiniti Connection features.............................. 7-3
Basic operation ............................................... 7-8
Viewing information feeds ............................... 7-9
Updating All Information Feeds...................... 7-10
Connecting to Interactive Voice Menu ............ 7-10
Viewing information feeds history ................. 7-11
Deleting Infiniti Connection history ................ 7-12
Initializing all Infiniti Connection settings ...... 7-13
Displaying unit ID information ....................... 7-13
Volume setting .............................................. 7-14
Emergency support........................................ 7-14
Viewing information about current
vehicle location ................................................. 7-15 Basic operation ............................................. 7-15 Viewing available traffic information.................. 7-16
Basic operation............................................ 7-16
Info on route ............................................... 7-17
Nearby traffic Info. ....................................... 7-17
Display urgent traffic information................. 7-18
Traffic information on map ........................... 7-18
Traffic information settings .......................... 7-20
Viewing available weather information .............. 7-21 Displaying weather information screen ........ 7-22
Destination weather on suggested
route screen ................................................ 7-28
Automatically display warnings/watches ...... 7-29
Map update ...................................................... 7-30
Viewing navigation system unit identification .... 7-31 Basic operation............................................ 7-31
Viewing navigation system
version information ........................................... 7-31 Basic operation............................................ 7-31
Viewing GPS current location information.......... 7-32
Basic operation............................................ 7-32