instrument panel INFINITI QX60 HYBRID 2014 Quick Reference Guide

23
24
26
25
292827
17181920
21
121315
22
*See your Owner’s Manual for information.
01 INSTRUMENT BRIGHTNESS
CONTROL SWITCHES*
02 BACKUP COLLISION INTERVENTION
(BCI) SWITCH*
03 TWIN TRIP ODOMETER RESET SWITCH*
04 VEHICLE INFORMATION DISPLAy
05 HEADLIGHT AND TURN SIGNAL SWITCH
06 EV INDICATOR LIGHT
07 LOW TIRE PRESSURE WARNING LIGHT
08 WINDSHIELD WIPER AND
WASHER SWITCH
09 VEHICLE INFORMATION
DISPLAy SWITCH
10 STEERING WHEEL SWITCHES FOR
AUDIO*/BLUETOOTH®/NAVIGATION
11 INTELLIGENT CRUISE CONTROL
12 VEHICLE DyNAMIC CONTROL
(VDC) OFF SWITCH*
13 POWER LIFTGATE SWITCH
14 POWER LIFTGATE MAIN SWITCH

01
04
070605
09
08
02
03
15 DyNAMIC DRIVER ASSISTANCE
CONTROL SWITCH*
16 TILT/TELESCOPIC STEERING
WHEEL SWITCH*
17 HEADLIGHT AIMING
CONTROL SWITCH*
18 WARNING SySTEMS SWITCH
19 HEATED STEERING WHEEL SWITCH*
20 POWER INVERTER SWITCH
21 HOOD RELEASE*
22 CONTROL PANEL DISPLAy SCREEN*
23 CLIMATE CONTROL SySTEM
24 AUDIO SySTEM
25 FRONT PASSENGER AIR BAG
STATUS LIGHT*
26 POWER OUTLET
27 DRIVER’S CLIMATE CONTROLLED
SEAT SWITCH*
28 INFINITI DRIVE MODE SELECTOR*
29 PASSENGER’S CLIMATE
CONTROLLED SEAT SWITCH*
1110
Behind
steering wheel
Behind
steering wheel Behind
steering wheel
16
14
1591600_14b_Infiniti_QX60_HEV_QRG_092413.indd 39/24/13 11:43 AM

3



Scheduled Maintenance Notification – Receive scheduled maintenance no\
tifications
based on mileage data provided by your vehicle.

Maintenance Alert – Receive notification of a vehicle system malfunct\
ion that triggers
instrument panel warning lights.

Destination Assistance – Receive point-of-interest assistance via gui\
ded IVR (Interactive
Voice Response), or Response Specialist by pressing the

key on the map screen, or
Infiniti Connection™ web portal.

Destination Send-to Vehicle – Find and download point-of interest inf\
ormation from
Google Maps™.
• To access, go to the Infiniti Connection menu and select “Sync All In\
formation Feeds”.
Then go to the feeds menu page and download the desired destination info\
rmation.

Connected Search – Select “Connected Search” from the Destinati\
on menu on the
vehicle’s navigation system to conduct a point-of-interest search wit\
hin a certain distance
of the vehicle’s location.

Drive Zone – Monitor the movement of your vehicle within a specified \
region. Set up
boundaries in the Monitoring section of the Infiniti Connection web port\
al.

Max Speed Alert – Set up a maximum speed on the Infiniti Connection™\
web portal. you
will receive notifications if your vehicle exceeds the max speed setting\
.

Mobile Information Service – Receive the latest news headlines, stock\
quotes and
sports scores by setting up preferences on the Mobile Information Servic\
e page in the
Infiniti Connection™ web portal.

Valet Alert – Use Valet Alert to set up a 0.2 mile radius around your\
vehicle.
• Activate alerts by pressing the “Connect to Voice Menu” button on \
the Infiniti
Connection screen or by pressing the

key on the map screen.
• At the prompt, say “Valet Alert” and then “Activate” or “\
Deactivate”.
For more information, refer to the “Viewing technical information (section 7)” of your Navigation System Owner’s Manual.
1591600_14b_Infiniti_QX60_HEV_QRG_092413.indd 39/24/13 11:43 AM

INTELLIGENT KEy BATTERy DISCHARGE

If the battery of the Intelligent Key is discharged,
or environmental conditions interfere with the
Intelligent Key operation, start the engine according
to the following procedure:
1. Move the shift lever to the P (PARK) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent Key
and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing
the brake pedal and the engine will start.
*Laws in some communities may restrict the use of remote starters. Check\
local regulations before using this feature.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)” and
the “Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
11
Power Liftgate

When the liftgate is closed and locked, the liftgate
will open automatically by:
• Pushing the power liftgate switch

01 on the
instrument panel.
• Pushing the liftgate opener switch

02, the
liftgate must be unlocked, or you must have the
Intelligent Key with you (in your pocket or purse).
• Pressing the

button
03 on the INFINITI
Intelligent Key for more than 1 second.

The power liftgate operation can be turned on or
off by the power liftgate main switch

04 on the
instrument panel.

•
When the power liftgate main
switch is pushed to the OFF
position, power operation is not
available using the power liftgate
switch on the liftgate

05 or the
liftgate opener switch 02.
For more information, refer to the “Pre-driving checks
and adjustments (section 3)” of your Owner’s Manual.
0401
02
0503
1591600_14b_Infiniti_QX60_HEV_QRG_092413.indd 119/24/13 11:43 AM

15
Headlight Control Switch
HEADLIGHT CONTROL


Turn the headlight control switch to the
position
01 to turn on the front parking, tail, license plate and

instrument panel lights. Turn the switch to the
position 02 to turn on the headlights.
AUTOLIGHT SySTEM


The autolight system will automatically turn the headlights on when it i\
s dark and off when
it is light. The system will keep the headlights on for a period of time\
after you turn the
ignition off and all doors are closed.


To activate the autolight system, turn the headlight control switch to t\
he AUTO position
03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
position
01 or
position
02.
HIGH BEAM SELECT


Push the headlight control switch forward
04 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel.
Pull the headlight switch back to the original
position to select the low beam. The blue
indicator light goes off.


Pull and release the headlight control switch
05 to
flash the headlight high beams on and off.
FOG LIGHT SWITCH


The headlights must be in auto, or the low
beams

selected for the fog lights to operate.


Turn the switch (inside collar) to the
position
06
to turn the fog lights on.


Turn the switch (inside collar)
to the OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
03
04
06
01
05
02
1591600_14b_Infiniti_QX60_HEV_QRG_092413.indd 159/24/13 11:43 AM

first drive features
20
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has
reached 25 MPH (40 km/h).

The system will automatically maintain the set
speed until you tap the brake pedal, accelerate,
cancel or turn the system off.

To activate the cruise control, push the
CRUISE

ON/OFF switch
01. The
CRUISE
indicator light in the instrument panel will illuminate.

To set cruising speed, accelerate the vehicle to the desired speed, push\
the COAST/SET
switch
02 and release. The
SET indicator light
in the instrument panel will illuminate. Take
your foot off the accelerator pedal. your vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the ACCEL/RES switch 03. When the
vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAST/SET switch 02. Release the
switch when the vehicle slows to the desired speed.

To cancel the preset speed, push the CANCEL switch
04.

To turn off cruise control, push the CRUISE
ON/OFF switch
01. Both the
CRUISE indicator
light and the SET indicator light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
0102
03
04
USB/iPod® Interface

The USB jack
01 is located in the center
console under the arm rest.

When a compatible USB memory device or
iPod® is plugged into the USB jack, compatible
audio and video files stored on the device can be
played through the vehicle’s audio system and
front display.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
01
04 STATION PRESET BUTTONS

Twelve stations can be set for the FM band, six for the AM band and eigh\
teen for XM
Satellite Radio.

To store a station in a preset, you must first select a radio band by pr\
essing the FM•AM

05 or XM
06 button, then tune to the desired FM, AM or XM Satellite Radio station.
Then press and hold the desired station preset button (1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indic\
ator will then
display and the sound will resume. Programming is now complete.

To retrieve a previously set station, select the radio band where the pr\
eset was stored
then press the corresponding station select button (1-6).
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
1591600_14b_Infiniti_QX60_HEV_QRG_092413.indd 209/24/13 11:43 AM

21
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE

To set Vehicle-To-Vehicle Distance Control mode,
press the CRUISE ON/OFF button
01 for less than
1.5 seconds. The CRUISE indicator light 02
will illuminate.

Accelerate to the desired speed.

Push down on the COAST/SET switch
03 and
release it. Cruise control will be set to the
desired speed.

Press the distance button 04 repeatedly to change
the set distance between long, middle, and short.

When a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed
indicator lights will illuminate

05 in set mode.

When a vehicle is detected ahead of you in the lane,
the vehicle ahead detection, set distance, and set vehicle speed
indicator lights will illuminate
06 in set mode.

To reset at a faster cruising speed, push and hold the ACCEL/RES
switch

07. When the vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAST/SET switch


03. Release the switch when the vehicle slows to the desired speed.

To cancel the preset speed, push the CANCEL switch
08 or tap the brake pedal. The set
vehicle speed indicator
05 will go out.

To turn off cruise control, press the CRUISE ON/OFF button
01. The CRUISE indicator light


02, in the instrument panel, will turn off.
To set conventional (fixed speed) cruise control mode:

While cruise control is off, press the CRUISE ON/OFF
button 01
and hold it down for more
than 1.5 seconds. The CRUISE indicator light will illuminate.

Accelerate to the desired speed.

Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.
Cruise control will be set to the desired speed.
To switch between the two cruise control modes:

When one of the two cruise modes is in use, you must turn the system off,\
and then turn it
on again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
0403
0708
0205
06
1591600_14b_Infiniti_QX60_HEV_QRG_092413.indd 219/24/13 11:43 AM

22
Power Outlets
12V OUTLETS

The power outlets are for powering electrical
accessories such as cellular telephones. They are
rated at 12 volt, 120W (10A) maximum.

To use a power outlet, open the cap.

The power outlet on the instrument panel 01,
inside the center console

02, on the back of the
center console

03 and in the cargo area 04

are powered only when the ignition switch
is in the ACC or ON position.
120V OUTLET (if so equipped)

The 120V outlet
05 is located on the back of the
center console.

To use the outlets for devices that require 120V
power, place the ignition in the ON position and
push the power inverter switch

06.

The switch will illuminate when enabled.
For more information, refer to the “Instruments and controls (section 2)”
of your Owner’s Manual.
01
04
05
03
06
02
first drive features
1591600_14b_Infiniti_QX60_HEV_QRG_092413.indd 229/24/13 11:43 AM

system guide
26 MAKING A CALL By PHONE NUMBER
1. Press the
button.
2. After waiting for the tone, say “Call”.
3. After the next tone, say “Phone Number”.
4. After the next tone, say “123-456-7890”.

you may also say the digits in groups of 3, 3 and 4, respectively. To use\
this group dialing
method, say only the first 3 digits of the phone number instead of all 1\
0 digits. After the
system recognizes the digits, it will request the next 3 digits and fina\
lly the last 4 digits.
5. After the system speaks the correct number and sounds the tone, say “\
Dial.”
RECEIVING/ENDING A CALL

To accept the call, press the button on the steering wheel.


To reject the call, press the
button.


To hang-up, press the
button.
Bluetooth® System with Navigation
(if so equipped)
CONNECTING PROCEDURE

The vehicle must be stationary when connecting
the phone.
1. Press the SETTING button on the instrument panel
and select the “Bluetooth” key on the display.
2. Select the “Connect Bluetooth” key.
1591600_14b_Infiniti_QX60_HEV_QRG_092413.indd 269/24/13 11:43 AM