buttons INFINITI QX70 2014 Quick Reference Guide

10
first drive features
Automatic Climate Controls
01 AUTO BUTTON/DRIVER’S SIDE TEMPERATURE CONTROL DIAL The auto mode may be used year-round. Press the
AUTO button to turn the system on
and the system will automatically control the inside temperature (autom\
atic cooling and/
or dehumidified heating), air flow distribution and fan speed.
Turn the driver’s side temperature control dial to the left for coole\
r air or right for warmer air.
02 DUAL BUTTON/PASSENGER’S SIDE TEMPERATURE CONTROL DIAL
Press the DUAL button to turn the passenger’s side temperature controls on or off. T\
his
will allow the passenger’s side temperature to be adjusted independen\
tly from the
driver’s side by turning the passenger’s side temperature control \
dial.
Turn the passenger’s side temperature control dial left for cooler ai\
r or right for warmer air.
03 FAN SPEED CONTROL BUTTONS
To manually adjust the fan speed, press the top button to increase the fan speed or
press the bottom
button to decrease the fan speed.
04 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the defroster control button to turn the system on. The A/C automatically turns

on when the defroster mode is selected. This feature removes humidity fr\
om the air.
Turn the temperature control dial 01 to set the desired temperature.
To defrost the front and side windows quickly, set the temperature contr\
ols and fan speed

controls to their maximum settings.
05 MODE BUTTON
Press the
MODE button
to cycle through the following air flow outlets:



Air flows from the center and side vents.



Air flows from the center, side and foot vents.



Air flows mainly from the foot vents.



Air flows from the defroster and foot vents.
06 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS
Push the rear window defroster switch to turn the system on or off.
This function automatically turns off after approximately 15 minutes.
010302
09
08
06
04
07
05
1354681_14a_Infiniti_QX70_QRG_052813.indd 105/28/13 12:00 PM

12
first drive features
FM/AM/SiriusXM* Satellite Radio with CD/DVD Player
(with Navigation System – if so equipped)
01 VOLUME/ON•OFF CONTROL KNOB
Press the
VOL/ON•OFF control knob to turn the system on or off. Turn the knob right or left



to increase or decrease the volume.
02 SEEK•CAT AND TRACK BUTTONS
To scan quickly through each broadcasting station, press the
SEEK•CAT button or the TRACK



button to stop at the previous or next broadcast station.
For SiriusXM Satellite Radio, press the
SEEK•CAT button or the TRACK button to switch to



the first channel of the previous or next category.

Press the
SEEK•CAT button or the TRACK button to change tracks on a CD.
Press and hold the
SEEK•CAT button or the TRACK button to fast forward or rewind a



track on a CD.
03 TUNE/FOLDER/AUDIO CONTROL KNOB
To manually tune the radio, turn the
TUNE/FOLDER/AUDIO knob left or right.
04 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and eigh\
teen for SiriusXM




Satellite Radio.
To store a station in a preset, you must first select a radio band by pr\
essing the
AM•FM/SAT



button 05 , then tune to the desired AM, FM or SiriusXM Satellite station.

Then press and hold the desired station preset button
( 1-6) until the sound is briefly



muted. The channel indicator will then display and the sound will resume\
. Programming




is now complete.
To retrieve a previously set station, select the radio band where the pr\
eset was stored,




then press the corresponding station select button
(1-6).
*SiriusXM Satellite Radio is only available on vehicles equipped with op\
tional SiriusXM Satellite subscription service.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your Owner’s Manual.
05
0103
04
02
1354681_14a_Infiniti_QX70_QRG_052813.indd 125/28/13 12:00 PM

21
Navigation System (if so equipped)
Your Navigation System can calculate a route from the current location t\
o a preferred destination.



The real-time map display and turn-by-turn voice guidance will lead you \
along the route.
The Navigation System will continually update your vehicle’s position\
. If you have deviated




from the original route, it will recalculate the route from your current\
location.
01 Touch screen display
02 DEST button – Press to enter a destination.

03 STATUS button – Press multiple times to display audio information with eith\
er the air

conditioner status, fuel economy or navigation directions.
04 ZOOM OUT button – Press to zoom the map out.

05 ROUTE button – Press to access the guidance control functions (guidance c\
ancellation, route

priority, waypoint setting on the route, etc.).
06 INFINITI Controller

•
ENTER
button – Press to select the highlighted item on the screen. If this\
button is
pressed while a map is displayed, the map menu screen is displayed.
• Main directional buttons – Use to move across the map, highlight an i\
tem on the screen or





adjust a setting (volume, brightness, etc.).


• Additional directional buttons – Use to move across the map or highli\
ght an item on the



character input screen.


• Center dial – Use to highlight an item on the screen or adjust a sett\
ing. The center dial can



also be used to adjust the map scale.
01
04
09
02
05
10
12
06
03
07
11
08
13
1354681_14a_Infiniti_QX70_QRG_052813.indd 215/28/13 12:01 PM

23
HOMELINK®
HomeLink® Universal Transceiver
The HomeLink® system can learn and consolidate the functions of up to three different\

hand-held transmitters, operating items such as garage doors, property g\
ates, outdoor
and indoor lights or alarm systems.
To program the Homelink® Universal Transceiver:
•
Position


the

handheld

transceiver 1-3 in (26-76 mm) away from the Homelink
®
surface, keeping the Homelink® indicator light in view.
•
Press


and

hold

the

desired

Homelink
® button and the handheld transmitter button
simultaneously until the Homelink® indicator light flashes slowly and then rapidly.
•
Both


buttons

may

be

released

when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the Homelink® and observe the
indicator light:
•
A


solid

continuous

light

indicates

the

programing

is

complete

and the Homelink
®
button will activate your device.
•
A


blinking

light

that

turns

to

a

solid

continuous

light

after

2

seconds

indicates

additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete th\
e
programing process:
•
At

the receiver of the device that you are programing to the Homelink
®, press and
release the “learn” or “smart” button (the name may vary by\
manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit). You
have approximately 30 seconds to initiate the following step.
•
Press


and

hold

the

programmed

Homelink
® button for 2 seconds and release.
Repeat the previous 2 steps up to 3 times to complete the programming pr\
ocess.
Homelink® should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website
at www.homelink.com or call 1-800-355-3515.
1354681_14a_Infiniti_QX70_QRG_052813.indd 235/28/13 12:01 PM