steering wheel INFINITI QX70 2017 Quick Reference Guide

*See your Owner’s Manual for information.
1 INSTRUMENT BRIGHTNESS CONTROL*
2 TRIP COMPUTER SWITCHES
3 LOW TIRE PRESSURE WARNING LIGHT
4 PADDLE SHIFTERS*
5 HEADLIGHT AND TURN SIGNAL SWITCH
6 WIPER AND WASHER SWITCH
7 TRIP A/B RESET SWITCH*
8 STEERING WHEEL SWITCHES FOR
AUDIO*/BLUETOOTH®/NAVIGATION
9 INTELLIGENT CRUISE CONTROL
10 OUTSIDE MIRROR CONTROL SWITCH
11 INTELLIGENT BRAKE ASSIST (IBA) OFF SWITCH*
12 POWER LIFTGATE SWITCH
1
44
65
7
22
23
20
14
2
3
21
13 POWER LIFTGATE MAIN SWITCH
14 DYNAMIC DRIVER ASSISTANCE SWITCH*
15 TILT/TELESCOPIC STEERING WHEEL SWITCH*
16 WARNING SYSTEMS SWITCH*
17 VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH*
18 INTELLIGENT KEY PORT*
19 HOOD RELEASE*
20 CONTROL PANEL DISPLAY SCREEN*
21 AUDIO SYSTEM
22 HEATER AND AIR CONDITIONER (automatic)
23 FRONT PASSENGER AIR BAG STATUS LIGHT*
9Behind
steering wheel
Behind
steering wheel Behind
steering wheel
15
8
19
10
1617
111213
18
On steering column

18
Bluetooth® Hands-free Phone System
A cellular telephone should not be used while
driving so full attention may be given to
vehicle operation.*
SYSTEM OPERATING TIPS
If the Voice Recognition system does not recognize
your voice commands:



1.

Be sure to wait for the tone/beep before speaking
a voice command.



2.

Reduce background noise as much as possible by
closing the windows and moonroof.



3.

Make sure there are no other conversations in the
car at the same time.



4.

Lower HVAC blower fan speed and point vents
away from the ceiling microphone.



5.

Speak naturally. Speaking too fast, too slow,

too soft, or too loud makes voice recognition
more difficult.



6.

Confirm the correct voice commands are being

used. Glance at the screen to see the currently
available commands.



7
.
Train the system using the Speaker Adaptation Mode. See your Owner’s \
Manual for

detailed information.
Press the or button on the steering wheel to interrupt the voice prompts at any time \
and speak a command after the tone.
For vehicles not equipped with Navigation:



•

To use the system faster, you may speak the second level commands with t\
he main
menu command on the main menu. For example, press the
or button on the
steering wheel, and after the tone, say “Call Redial”.
For vehicles equipped with Navigation:



•

Refer to the
“Voice recognition (section 9)” of your Navigation System Owner’s Manual
for more information.
The “Help” command can be used to hear a list of available command\
s at any time.
When speaking phonebook names, please be aware some cellular phones requ\
ire the last
name to be spoken before the first name. For example, “Michael Smith”\
may be spoken as
“Smith Michael”.
To cancel a Voice Recognition session, simply wait 5 seconds, say “Ca\
ncel” or “Quit”, or
press and hold the
button on the steering wheel for 5 seconds.
For more detailed information and instructions, refer to your cellular p\
hone’s Owner’s
Manual and visit www.InfinitiUSA.com/bluetooth.
Bluetooth® Controls
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
Microphone
system guide

19
Bluetooth® System with Navigation* (if so equipped)
CONNECTING PROCEDURE
The vehicle must be stationary when connecting the
cellular phone.
1

.

Press the SETTING button on the control panel and
touch the “Bluetooth” key on the display.
2. Touch the “Connect Bluetooth” key.
3.


A pop-up box will appear on the screen, prompting
you to confirm that the connection is for the


hands-free phone system. Touch the “Yes” key.
4. Initiate connecting from the cellular phone.



•

The connecting procedure varies according
to each cellular phone model. For detailed
connecting instructions and a list of
compatible cellular phones, please visit
www.InfinitiUSA.com/bluetooth

.



•

When prompted for a PIN, enter “1234” from the
handset. (The PIN is assigned by INFINITI and
cannot be changed.)



•

For cellular phones that support SSP (Simple
Secure Pairing), confirm that the PIN on the
vehicle display matches the PIN displayed on the
cellular phone.
3.


When the connecting is complete, the screen will
return to the “Phone” menu display.
PHONEBOOK SETUP
Depending on your cellular phone, the system may
automatically download your cellular phone’s entire
phonebook to the vehicle’s Bluetooth
® system.
If the phonebook does not download automatically,
the vehicle phonebook may be set for up to
40 entries.
To manually download entries:
1. Press the
button on the steering wheel and
select the “Quick Dial” key.



2

.



Select the “Add New” key at the top of the display.

There are different methods to input a phone
number. Select one of the following options:



•


“Copy from Call History”– to save a number

from the Outgoing, Incoming or Missed
Calls lists.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.

20


•

“Copy from the Phonebook”– to save a number that has been downl\
oaded from your
handset to the vehicle.



•

“Enter Number by Keypad”– to input the number and name manually\
.
MAKING A CALL


1. Press the
button on the steering wheel.



2. After waiting for the tone, say “Phone”.



3. After the next tone, say “Dial Number”.



4.


After the next tone, say “123-456-7890”. You may also say the digi\
ts in groups of
3, 3 and 4, respectively. To use this group dialing method, say only the\
first 3 digits of
the phone number instead of all 10 digits. After the system recognizes t\
he digits, it will
request the next 3 digits and finally the last 4 digits.



5.


After the system speaks the correct number and sounds the tone, say “\
Dial”.
RECEIVING/ENDING A CALL
To accept the call:



•

Press the button on the steering wheel, or



•Touch the “Answer” key.
To reject the call, touch the “Reject Call” key.
To hang up:



•

Press the button on the steering wheel, or



•


Touch the “Hang up” key.
Bluetooth® System without Navigation* (if so equipped)
PAIRING PROCEDURE



1.

Press the button on the steering wheel. The
system announces the available commands.



2.


Say “Add Phone”. The system acknowledges the
command and asks you to initiate connecting
from the cellular phone handset.



3.


Initiate pairing from the cellular phone.



•


The connecting procedure varies according
to each cellular phone model. For detailed
connecting instructions and a list of compatible
cellular phones, please visit

www.InfinitiUSA.com/bluetooth.



•


When prompted for a PIN, enter “1234” from the handset. (The PIN \
is assigned by
INFINITI and cannot be changed.)
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
system guide

21



•


For cellular phones that support SSP (Simple Secure Pairing), confirm \
that the PIN on the
vehicle display matches the PIN displayed on the cellular phone.



4.


Say a name for the cellular phone when the system asks you to provide on\
e. You can
give the cellular phone a name of your choice.
PHONEBOOK
Depending on the cellular phone, the system may automatically download t\
he entire
phonebook. For more information, please visit www.InfinitiUSA.com/bluetooth or refer to
the cellular phone’s Owner’s Manual.
If the phonebook does not download automatically, 40 entries can be indi\
vidually
downloaded. To manually download entries:



1. Push the button on the steering wheel.



2. After the tone, say “Phonebook”.



3. After the next tone, say “Transfer Entry”.



4.


Using the cellular phone, select an entry to send to the vehicle. Please\
consult the
website above or your cellular phone’s Owner’s Manual for specific\
steps.



5.


Say a name for the cellular phone when the system asks you to provide on\
e. You can
give the cellular phone a name of your choice.
CALLING A PHONEBOOK ENTRY
In some cases, names stored using all UPPERCASE letters may not be recog\
nized by the
Voice Recognition system.



1. Press the button on the steering wheel.



2. After waiting for the tone, say “Call”.



3

. After the next tone, speak the name of a phonebook entry. For example, “\
Michael Smith”.



4. Confirm that the correct name is recognized by saying “Dial” af\
ter the tone.
MAKING A CALL



1. Press the button on the steering wheel.



2. After waiting for the tone, say “Call”.



3. After the next tone, say “Phone Number”.



4.


After the next tone, say “123- 456- 7890”. You may also say the di\
gits in groups of 3, 3
and 4, respectively. To use this group dialing method, say only the firs\
t 3 digits of the
phone number instead of all 10 digits. After the system recognizes the d\
igits, it will
request the next 3 digits and finally the last 4 digits.



5. After the system speaks the correct number and sounds the tone, say “\
Dial”.
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering wheel.
To reject the call, press the button on the steering wheel.
To hang up, press the button on the steering wheel.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your Owner’s
Manual or please visit www.InfinitiUSA.com/bluetooth.