remote control INFINITI QX80 2014 Quick Reference Guide

3
Destination Send-to Vehicle – Find and download point-of interest inf\
ormation from

Google Maps™. To access, go to the Infiniti Connection menu and select “Sync All
Information Feeds”. Then go to the feeds menu page and download the d\
esired
destination information.
Connected Search – Select “Connected Search” from the Destinati\
on menu on the vehicle’s

navigation system to conduct a point-of-interest search within a certain\
distance of the
vehicle’s location.
Drive Zone – Monitor the movement of your vehicle within a specified \
region. Set up

boundaries in the Monitoring section of the Infiniti Connection™ web portal.
Max Speed Alert – Set up a maximum speed on the Infiniti Connection™ web portal.

You will receive notifications if your vehicle exceeds the max speed set\
ting.
Mobile Information Service – Receive the latest news headlines, stock\
quotes and sports

scores by setting up preferences on the Mobile Information Service page \
in the Infiniti
Connection
™ web portal.
Valet Alert – Use Valet Alert to set up a 0.2 mile radius around your\
vehicle.



•

Activate alerts by pressing the “Connect to Voice Menu” button on \
the Infiniti

Connection
™ screen or by pressing the key on the map screen.



•


At the prompt, say “Valet Alert” and then “Activate” or “\
Deactivate”.
**Laws in some communities may restrict the use of text-to-speech. Check\
local regulations before using this feature.
For more information, refer to the “Viewing technical information (section 7)” of your Navigation System Owner’s Manual.
Theater Package (if so equipped)
With this entertainment system, you can play video
files via a DVD or CD providing images and sound both
from the front and rear display screens.
You can also connect auxiliary devices such as
video games, camcorders or portable video players
to the auxiliary jacks. (Your device will be controlled
through its own control panel.)
Rear Auxiliary Mode allows rear seat passengers to
independently display different sources on each screen.
Use the remote controller, provided with the system,
to operate the rear display screens.
Use the headphones, also provided with the system,
to listen to audio wirelessly and independently.
To watch or control videos on the front display make
sure the vehicle is in the P (PARK) position and the
parking brake is applied.
To reduce driver distraction, movies will not be shown o n the front display while the vehicle is
in any drive position.
To access standard DVD controls on the front display while playing a DVD\
on the rear display,
press the DISC•AUX button on the audio control panel while the vehicle is in the P (PARK)
position and the parking brake is applied.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (sect\
ion 4)” of your
Owner’s Manual.
1591592_14b_Infiniti_QX80_QRG_093013.indd 39/30/13 9:35 AM

8
first drive features
INFINITI Intelligent Key System
The INFINITI Intelligent Key system allows you to lock
or unlock your vehicle, open your liftgate and start the
engine. It is important to make sure the Intelligent Key
is with you (that is, in your pocket or purse).
REMOTE ENGINE START*
The remote engine start system must be enabled in
the vehicle settings within the vehicle information display.
The remote engine start operating range is approximately
200 ft (60 m) from the vehicle. The effective operating range
may be shorter due to environmental conditions or obstacles
between you and the vehicle.
For the remote engine start to function, the vehicle must be
in the P (PARK) position with the ignition off, and all the doors
closed and locked.
To start your vehicle remotely:



1.

Press the button
02
2. Within 5 seconds press and hold the remote engine start

button
06 for at least 2 seconds.

The engine will start and the parking lights will turn on.
Automatic climate control will begin heating or cooling the vehicle depe\
nding on the
last used mode.
The engine will run for 10 minutes and then turn off.
Repeat steps 1 and 2 to extend the time for an additional 10 minute peri\
od.
•


After two remote starts the ignition switch must be cycled before the re\
mote start can


be used again.
To start driving depress the brake pedal and push the ignition switch START/STOP button.
To lock the vehicle, push either door handle request switch 01 once or press the button
02 on the key fob.
To unlock the vehicle, perform one of the following procedures:



•

Push either door handle request switch 01 once; the corresponding door will unlock. Push
the door handle request switch
01 again within 1 minute; all other doors will unlock, or



•


Press the button 03 on the key fob to unlock the driver’s side door. Press the button
again; all other doors will unlock.
To open the liftgate, press the button 04 for more than 1 second.
The Intelligent Key can also be used to activate the panic alarm by pres\
sing and holding
the
button 05 for more than 1 second. Once activated, the panic alarm and headlights
will stay on for a period of time.
01
06
02
03
04
05
1591592_14b_Infiniti_QX80_QRG_093013.indd 89/30/13 9:35 AM

11
2nd Row Seats
The 2nd row seat can be tipped forward for easy entry to or exit from the 3rd row seat and
can be folded flat for maximum cargo hauling/extra storage space.
TIPPING THE 2
ND ROW SEATS FORWARD FOR ENTRY TO THE 3RD ROW
MANUAL CONTROLS
1. Raise the armrest up to the stowed position.
2.


Lift up on the seatback release latch A or the
reclining lever
B. The seatback will tip forward.
3.


Lift up on the lower rear corner of the seat bottom

and tip the seat forward.
To return the 2
nd row seats to the standard position:
1.


Push back on the seat to return it to its original

position and lock it in place.
2.


Pull up and push

back on the seatback
to lock it in place.
3.


Use the seat reclining

lever
B to adjust the seat to the desired position.
POWER REMOTE CONTROLS (if so equipped)
To fold down and tip forward the 2nd row seatback,
push and hold the remote tip-up 2nd row seat switch
01 located on the instrument panel.
The lower corner of the seat base will lift and the
2nd row seat will tip forward.
FOLDING THE 2
ND ROW SEATS FLAT
1. Raise the armrest up to the stowed position.

2.


Pull the seat bottom release strap C to position
the seat bottom forward.
3

.
P

ull seat reclining lever
B up to fold the
seatback for ward.
There is a carpet panel flap on the back side of the
seatback that can be folded toward the back of the
vehicle to provide a level cargo floor when the 3
rd
row seats are also folded flat. The center console
(if so equipped) can also be removed.
A
B
C
2. 3.
0101
1.2.
3.2.
1591592_14b_Infiniti_QX80_QRG_093013.indd 119/30/13 9:35 AM