steering INFINITI QX80 2014 Quick Reference Guide

*See your Owner ’s Manual for information.
01 INSTRUMENT BRIGHTNESS CONTROL SWITCH*
02 TRIP COMPUTER SWITCHES
03 HEADLIGHT AND TURN SIGNAL SWITCH
04 WINDSHIELD WIPER AND WASHER SWITCH
05 STEERING WHEEL SWITCHES FOR AUDIO* /
BLUETOOTH® / NAVIGATION
06 CRUISE CONTROL
07 WARNING SYSTEMS SWITCH*
08 POWER LIFTGATE SWITCH
09 TILT / TELESCOPIC STEERING WHEEL SWITCH*
10 DYNAMIC DRIVER ASSISTANCE SWITCH*
11 POWER LIFTGATE MAIN SWITCH*
12 HOOD RELEASE*
13 CONTROL PANEL DISPLAY SCREEN*
14 AUDIO SYSTEM
15 CLIMATE CONTROL SYSTEM
16 CLIMATE CONTROLLED SEAT KNOBS*
17 TIP-UP 2ND ROW SEAT SWITCHES
18 HEATED STEERING WHEEL SWITCH*
19 POWER OUTLET*
20 FRONT PASSENGER AIR BAG STATUS LIGHT*
21 FOUR-WHEEL DRIVE (4WD) SHIFT SWITCH*
0102
0304
050607
11
08
12
13
14
15
16
17
20
17
18
16
19
21
0910Behind
steering wheel on column
Behind
shift lever
1591592_14b_Infiniti_QX80_QRG_093013.indd 49/30/13 9:35 AM

10
first drive features
Front Seat Adjustments
To slide the seat forward or backward, push the
control switch
01 forward or backward.
To recline the seatback, push the switch 02
forward or backward.
SEAT LIFTER
To raise or lower the front portion or height of
the seat, push the front or back end of the switch
01 up or down.
LUMBAR SUPPORT

To adjust the seat lumbar support, push the front or back end of the swi\
tch 03.
For more information, refer to the “Safety —— seats, seat belts and supplemental restraint system (section 1)”\
of your
Owner’s Manual.
010203
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow these procedures to set the memory positions:



•

Confirm the shift lever is in the
P (PARK) position.



•

Push the ignition switch to the
ON position.



•

Adjust the driver’s seat, steering column and outside mirrors to the \
desired positions
using the adjusting switches for each feature.



•
Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at
least 1 second.



•

The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.



•

The driver’s seat, steering column and outside mirror positions are n\
ow set to
your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t Key. To link a
memorized position to your INFINITI Intelligent Key, press the unlock bu\
tton on the key fob
after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1591592_14b_Infiniti_QX80_QRG_093013.indd 109/30/13 9:35 AM

23
DIALING A CONTACT USING VOICE RECOGNITION
To make a call using voice recognition, follow

this procedure:
1.


Press the button on the steering wheel.

After the tone, say “PHONE”
2.


After the system confirms your command, wait for the

tone and say “Phonebook”.
3.


The system will prompt you to speak a name. After the tone, say a name f\
rom your

phonebook. Be aware that for some phones it will be necessary to say the\
name in the last
name, first name format.
4.


The system will give you a list of close matches. After the tone, select\
the correct match by

saying the number next to the correct match.
5.


The system will confirm your selection. After the tone, say “Dial”\
.
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering
wheel or touch the “Answer” key.
To reject the call, touch the “Reject Call” key.
To hang-up, press the button or touch the
“Hang up” key.
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual or please
visit www.InfinitiUSA.com/bluetooth.
1591592_14b_Infiniti_QX80_QRG_093013.indd 239/30/13 9:36 AM