driver seat adjustment INFINITI QX80 2018 Quick Reference Guide

15
• To slide the seat forward or backward, push the switch 1 forward
or backward.
• To recline the seatback, push the switch 2 forward or backward.
SEAT LIFTER
• To adjust the angle of the front portion or height of the seat, push the front or rear end of the
switch 1 up or down.
LUMBAR SUPPORT
• Push each side o f the adjusting switch 3 to adjust the seat lumbar area
until the desired position is achieved.
SEAT/STEERING POSITIONING ON EXIT
• The shift le ver must be in P (PARK) position with the
ignition switch in the OFF position.
• The entry/exit function can be activated or canceled by pushing and holding the SET switch
4, located on the
driver’s side door, for more than 10 seconds.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating
and feature information.
Seat Adjustments
2
3
1
4
Head Restraint Adjustment
To raise the head restraint: Pull the head restraint up.
To lower the head restraint: Push and hold the lock
knob
1 and push the head restraint down.
Make sure the head restraint is fully engaged in
position after any adjustment.
Please see your Owner’s Manual for important safety information,
system limitations, and additional operating and feature information.
1
3059068_18a_QX80_US_pQRG_101717.indd 1510/17/17 1:17 PM