air condition INFINITI QX80 2020 Warranty Information Booklet
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2020, Model line: QX80, Model: INFINITI QX80 2020Pages: 64, PDF Size: 0.28 MB
Page 47 of 64

44
Never perform a temporary repair, use an
innertube or inject sealant as a permanent
substitute for a proper repair. Only qualified
persons should repair tires.
Be sure that all your valves have suitable valve
caps. This will keep valve cores clean and clear
and guard against leakage.
REPAIRS - WHENEVER POSSIBLE, SEE
A TIRE RETAILER AT ONCE.Some tire
manufacturers do not warrant any inspection
or repair process. The repair is entirely the
responsibility of the repairer. Punctures in
the tread of a passenger tire which do not
exceed 1/4 of an inch (6mm) in diameter can
usually be repaired by following the Rubber
Manufacturer’s Association (RMA) Passenger
and Light Truck Repair procedures. Contact
the manufacturer of your tires for its position
and assistance as to the acceptable location
for a proper repair and the repair of speed
rated tires.Do not use plug repairs. They may
cause further damage to the tire. They are not
always air tight and the plug may fail.Do not
exceed posted speed limits on any repaired tire.
Certain tire manufacturers speed ratings are
voided if the tire is repaired.
Although a tire was properly repaired, internal
structural damage resulting from the puncture
may have occurred.
Sometime later the damage may cause the tire
to be removed from service.
If the tire has a puncture in the tread which
exceeds 1/4 inch (6mm), the tire must be replaced. If any tire has sustained a puncture,
have the tire inspected internally by a tire
retailer for possible damage that may have
occurred.
Improper mounting and inflation procedures
can cause an explosion of the tire/rim
assembly. Only specially trained persons should
perform these tasks. Contact your tire store or
retailer for assistance.
CAUTION - Never, under any circumstance,
introduce a flammable substance into a tire.
WHEEL ALIGNMENT AND BALANCING
Wheel alignment and balancing are important
for safety and maximum mileage from your
tires. Check how your tires are wearing at
least once a month. If your tires are wearing
unevenly, such as the inside shoulder of the
tire wearing faster than the rest of the tread,
or if you detect excessive vibration, your
vehicle may be out of alignment or balance.
These conditions not only shorten the life of
your tires, but adversely affect the handling
characteristics of your vehicle which could
be dangerous. If you detect irregular wear or
vibration, have your alignment and balance
checked immediately. Tires which have been
run underinflated will show more wear on the
shoulders than in the center of the tread.
HARD BRAKING
You must inspect your tires after any hard
braking circumstances or after tires have slid
on the pavement. This can cause a flat spot in
a section of the tire tread. TIRE SPINNING
Never spin your tires above a speedometer
reading of 35 mph (55 km/h) if your vehicle
becomes stuck. The centrifugal force
generated by the free spinning tire/wheel
assembly may cause a sudden tire explosion,
resulting in vehicle damage and/or serious
personal injury or death. Never allow anyone
to stand near or behind a tire spinning at high
speed while attempting to push a vehicle that
is stuck. When in mud, sand, snow, ice or other
slippery conditions, do not indulge in excessive
wheel spin. In such conditions, with automatic
transmission vehicles, by accelerating the
engine excessively, it is possible to spin one of
the drive tires beyond its speed capability. This
is also true when balancing a drive tire/wheel
assembly using the engine of the vehicle to
spin the wheel.
TIRE TREAD
Tires must be replaced when the depth of
the tread reaches 2/32 inch (1.6 mm). Tires
are manufactured with tread wear indicators
molded into the tire grooves which indicate
tread wearout. As tires approximate 2/32 inch
(1.6 mm) wearout, the tread gauge becomes
thinner and more vulnerable to the effects
of road hazards. Also, worn tires are more
subject to hydroplaning, which can cause loss
of control. Therefore, visual tire inspection
becomes more crucial as the tires wear out.
(Continued on next page)
IMPORTANT TIRE SAFETY INFORMATION¹
Page 49 of 64

46
HIGH PRESSURE TEMPORARY
SPARE TIRES
1) The high-pressure spare tire in your Infiniti
vehicle is designed for temporary use
only and must not be used continually as
a regular tire. The standard tire should
be repaired and/or replaced as soon as
possible.
2) Avoid driving over obstacles that may
damage the tire through impact or cutting,
such as potholes, glass, metal, etc.
3) Speed must not exceed 50MPH (80km/h)
for non-speed-rated temporary spare tires.
4) Temporary spare tires have a limited
treadlife which can vary depending on road
conditions and your driving habits. The
spare tire should be returned to the trunk as
soon as the standard tire can be repaired or
replaced.
5) Because the high-pressure spare tire was
specifically designed for your car, it should
not be used on any other vehicle.
6) Do not use snow chains on your high-
pressure spare. This could cause damage to
your vehicle.
7) Check the tire’s cold inflation pressure
monthly and maintain at 60psi (4.2kg/cm2)
even when not in use. 8) The high-pressure spare tire should not be
used with any other rim nor should standard
tires, wheel covers, or trim rings be used on
the high-pressure spare tire rim which was
originally installed.
9) When the tread wear indicator appears on
the tire, replace it only with the same type
spare tire.
10) Do not enter an automatic carwash with a
temporary spare tire fitted.
11) Do not make a sharp turn or apply the
brakes suddenly when driving on a high-
pressure temporary spare.
Note:
When using any temporary type spare tire,
be sure to follow the vehicle Owner’s Manual
instructions.
TIRE STORAGE
All tires should be stored in a cool dry place
indoors so that there is no danger of water
collecting inside them.
When tires are stored they should be stored
in a cool place away from sources of heat
and ozone such as hot pipes and electric
generators. Be sure that surfaces on which
tires are stored are clean and free from grease,
gasoline or other substances which could
deteriorate the rubber. (Tires exposed to these
materials during storage or driving could be
subject to sudden failure.)To Avoid Damage to your Tires and Possible
Accident:
•• Check tire pressure at least once a
month when tires are cold and before
long trips.
•• Do not underinflate/overinflate.•• Do not overload.•• Drive at moderate speeds, observe legal
limits.
•• Avoid driving over potholes, obstacles,
curbs or edges of pavement.
•• Avoid excessive wheel spinning.•• If you see any damage to a tire,
replace with spare and see the tire
manufacturer’s retailer or your Infiniti
retailer.
For further information, the Consumer Tire
Guide on passenger tire care, safety and
mileage performance is available in the United
States by writing the Tire Industry Safety
Council, Box 1801, Washington, D.C. 20013.
IMPORTANT TIRE SAFETY INFORMATION¹
Page 52 of 64

49
LONG TERM PROTECTION FOR
YOUR INFINITI...
For extra peace of mind, you can choose from
a full suite of Infiniti Elite® Assurance Products
to protect your investment in new or pre-
owned Infiniti vehicles, including: Extended
Protection Plan, Prepaid Maintenance Plan,
Tire & Wheel Protection Plan, Theft Protection
Plan, Key Replacement Plan, and our bundled
Platinum Protection Plan that provides Tire
and Wheel Road Hazard Protection, Paintless
Dent Repair Windshield Repair and Emergency
Roadside Assistance.
Backed by Infiniti and designed exclusively for
Infiniti owners, our Extended Protection Plan
and Prepaid Maintenance Plan are available
in a variety of coverage levels and time and
mileage intervals, enabling you to customize
a plan to suit your personal driving habits and
length of ownership. Infiniti Elite
® Assurance
Products provide you with quality long-term
protection and enhanced peace of mind. Just a few of its major features:
1. With Infiniti Elite
® Extended Protection
Plan, you can choose coverage for up to 8
years/120,000 miles to help guard against
rising repair costs.
2. Repairs are performed at participating
Infiniti dealerships throughout the U.S.,
excluding U.S. Territories. Repairs at these
dealerships are performed by factory-
trained technicians using Genuine Infiniti or
Infiniti-approved new or remanufactured
parts to maintain your vehicle in top running
condition.
3. Payment-free service, other than your
deductible (if applicable). Dealers are paid
directly by Infiniti.
4. All Infiniti Elite
® Extended Protection Plans
are transferable to subsequent owners, thus
ensuring flexibility of your investment and
helping to enhance the resale value of your
Infiniti.
5. Customer assistance is available throughout
the U.S. at any Infiniti dealership, or by
calling 1-800- 662-6200. 6.0% financing
is available for qualified applicants for
Extended Protection Plans and Prepaid
Maintenance Plans.
YOU SIMPLY CAN’T GET BETTER
LONG-TERM PROTECTION
FOR YOUR MONEY THAN WITH
INFINITI ELITE
®!For details, please contact your authorized
Infiniti Dealer, visit infinitiusa.com or complete
the attached business reply card (no postage
necessary) and mail it to:
Infiniti Elite
® Protection Program
Headquarters P.O. Box 685004
Franklin, TN 37068-9965
We will send you a complete information
packet — the quicker you act, the sooner you
can enjoy the full protection of an Infiniti Elite
®
service contract.
INFINITI ELITE EXTENDED PROTECTION PLAN
Elite Protection Program®