fuse diagram ISUZU TF SERIES 2004 User Guide

ENGINE DRIVEABILITY AND EMISSIONS 6E–63
3. Check Bulletins and
Troubleshooting Hints
NOTE: As estimated 30 percent of successful vehicle
repairs are diagnosed with this step!
What you should do
You should have enough information gained from
preliminary checks to accurately search for a bulletin
and other related service information. Some service
manual sections provide troubleshooting hints that
match symptoms with specific complaints.
What resources you should use
You should use the following resources for assistance in
checking for bulletins and troubleshooting hints:
Printed bulletins
Access ISUZU Bulletin Web site.
Videotapes
Service manual
4. Perform Service Manual
Diagnostic Checks
What you should do
The “System Checks” in most service manual sections
and in most cells of section 8A (electrical) provide you
with:
A systematic approach to narrowing down the
possible causes of a system fault
Direction to specific diagnostic procedures in the
service manual
Assistance to identify what systems work correctly
What resources you should use
Whenever possible, you should use the following
resources to perform service manual checks:
Service manual
Technical equipment (for viewing DTCs and
analyzing data)
Digital multimeter and circuit testing tools
Other tools as needed
5a and 5b. Perform Service Manual
Diagnostic Procedures
NOTE: An estimated 40 percent of successful vehicle
repairs are diagnosed with these steps!
What you should do
When directed by service manual diagnostic checks,
you must then carefully and accurately perform the
steps of diagnostic procedures to locate the fault relatedto the customer complaint.
What resources you should use
Whenever appropriate, you should use the following
resources to perform service manual diagnostic
procedures:
Service manual
Technical equipment (for analyzing diagnostic data)
Digital multimeter and circuit testing tools
Essential and special tools
5c. Technician Self Diagnoses
When there is no DTC stored and no matching
symptom for the condition identified in the service
manual, you must begin with a thorough understanding
of how the system(s) operates. Efficient use of the
service manual combined with you ex perience and a
good process of elimination will result in accurate
diagnosis of the condition.
What you should do
Step 1: Identify and understand the suspect
circuit(s)
Having completed steps 1 through 4 of the Strategy
Based Diagnostics chart, you should have enough
information to identify the system(s) or sub-system(s)
involved. Using the service manual, you should
determine and investigate the following circuit
characteristics:
Electrical:
–How is the circuit powered (power distribution
charts and/or fuse block details)?
–How is the circuit grounded (ground distribution
charts)?
–How is the circuit controlled or sensed (theory of
operation):
–If it is a switched circuit, is it normally open or
normally closed?
–Is the power switched or is the ground
switched?
–Is it a variable resistance circuit (ECT sensor
or TP sensor, for ex ample)?
–Is it a signal generating device (MAF sensor of
VSS, for example)?
–Does it rely on some mechanical/vacuum
device to operate?
Physical:
–Where are the circuit components (component
locators and wire harness routing diagrams):
–Are there areas where wires could be chafed
or pinched (brackets or frames)?
–Are there areas subjected to ex treme
temperatures?

ANTITHEFT SYSTEM 11B – 9
E
A
DE
CB D
D-24
D-26
D-14
D-4
D-20
L-7
H-14
R-1
P-1 D-9(EUROPE)
2nd Battery
D-18P-5
P-6
C-30 C-2
C-117
C-109
H-13
H-7
H-25
H-6
P-2R-9 L-1 L-9
JUNCTION BLOCK
B-8,B-7,B-40 RELAY
C-1
C20 FUSE
X-1
X-15 RELAY
EB-1EB16 FUSE X-16, X-17 DIODE
SBF-1SBF-9 SLOW BLOW FUSE
R-10
H-16
H-8
H-26 H-10
H-24R-6
RTW48AXF025201
WIRING DIAGRAM (LHD)

11B – 14 ANTITHEFT SYSTEM
B
A
C
R-10
H-16
L-7 (EUROPE)
2nd Battery
D-25D-28
D-26 D-10
H-14
R-1
P-1 D-20
D-24
D-23
P-10P-5
P-6
C-30 C-2
C-117
H-25
H-13
P-2R-9 L-1 L-9 JUNCTION BLOCK
B-8,B-7,B-40 RELAY
C-1
C20 FUSE
X-1
X-15 RELAY
EB-1EB16 FUSE X-16, X-17 DIODE
SBF-1SBF-9 SLOW BLOW FUSE
H-18D-27
H-26 H-10
H-24R-6
RTW48AXF025501
WIRING DIAGRAM (Super Lock)