torque ISUZU TROOPER 1998 Service User Guide

SECTION 00
SERVICE INFORMATION
CONTENTS
PAGE
Troubleshooting........................................................00Ð 3
Main Data and Specifications.............................................00Ð45
Fixing Torque...........................................................00Ð48
Special Tools...........................................................00Ð52
SERVICE INFORMATION 00 Ð 1

00 Ð 46 SERVICE INFORMATION
COMPRESSOR
Model DKV-14D
Type Vane rotary (Invariable)
Number of vanes 5
Rotor diameter mm (in.) 64 (2.52)
Stroke mm (in.) 8.75 (0.34)
Displacement cc (Imp fl oz) 140 (3.9)
Maximum speed (rpm) 7,000 (up to 8,400)
Direction of rotation Clockwise (Front-side view)
Lubrication system Pressure differential type
Lubricant cc (Imp fl oz) ZXL-200PG, 150 (4.2)
ISUZU PART NO.
8-97101-336-0
Refrigerant g (lbs.) HFC-134a, 750 (1.65)
Shaft seal Lip type
Weight kg (lbs.) 3.6 (7.94)
MAGNETIC CLUTCH
Type Electromagnetic single-plate dry clutch
Rated voltage 12 Volts D.C.
Current consumption (A) 3.7
Starting torque Nám 39 (4.0 / 30)
(kgám / lbáft)
Direction of rotation Clockwise (Front-side view)
Weight kg (lbs.) 2.2 (4.9)
6VD1/6VE1 (RHD) & 6VD1 (LHD) (SAUDI/PHILIPPINE)
6VD1/6VE1 (LHD) Except SAUDI/PHILIPPINE
COMPRESSOR
Model HD6
Type Vane rotary (Invariable)
Number of vanes 6
Rotor diameter mm (in.) 64 (2.52)
Stroke mm (in.) 24 (0.94)
Displacement cc (Imp fl oz) 164 (4.59)
Maximum speed (rpm) 9,000
Direction of rotation Clockwise (Front-side view)
Lubrication system Pressure differential type
Lubricant cc (Imp fl oz) SD2-231, 150 (4.2)
Refrigerant g (lbs.) R-134a, 750 (1.65)
Shaft seal Lip type
Weight kg (lbs.) 6.8 (14.99)
MAGNETIC CLUTCH
Type Electromagnetic single-plate dry clutch
Rated voltage 12 Volts D.C.
Current consumption (A) 3.7
Starting torque Nám 39 (4.0 / 30)
(kgám / lbáft)
Direction of rotation Clockwise (Front-side view)
Weight kg (lbs.) 2.2 (4.9)

SERVICE INFORMATION 00 Ð 47
4JG2/4JX1
COMPRESSOR
Model DKS-15CH
Type Swash plate type
Number of cylinder 6
Bore mm (in.) 36 (1.4)
Stroke mm (in.) 24 (0.94)
Displacement cc (Imp fl oz) 147 (4.1)
Maximum speed (rpm) 7,000 (up to 8,400)
Direction of rotation Clockwise (Front-side view)
Lubrication system Pressure differential type
Lubricant cc (Imp fl oz) ZXL-100PG, 150 (4.2)
ISUZU PART NO.
8-97101-338-0
Refrigerant g (lbs.) HFC-134a, 750 (1.65)
Shaft seal Lip type
Weight kg (lbs.) 4.1 (9.0)
MAGNETIC CLUTCH
Type Electromagnetic single-plate dry clutch
Rated voltage 12 Volts D.C.
Current consumption (A) 3.7
Starting torque Nám 49 (5.0 / 36)
(kgám / lbáft)
Direction of rotation Clockwise (Front-side view)
Weight kg (lbs.) 2.3 (5.1)

00 Ð 48 SERVICE INFORMATION
FIXING TORQUE
Nám (kgám / lbáft)
"Ul
25(2.5/18)
15(1.5/11)
15(1.5/11)
13(1.3/113in)
6.0(0.6/52in)
6(0.6/52in)
38(3.9/28)
19(1.9/14)
19(1.9/14)
15(1.5/11)
25(2.5 / 18)
27(2.8 / 20)
40(4.1/30)
40(4.1/30)
20(2.0/14)15(1.5/11)
25(2.5/18)
27(2.8/20)
4JX1 4JG26VD1/6VE1, RHD19(1.9/14)
40(4.1/30)
19(1.9/14)
27(2.8/20)
6VD1/6VE1, LHD
19(1.9/14)
15(1.5/11)
E01RY00001

CAUTION
When fasteners are removed, always
reinstall them at the same location from
which they were removed. If a fastener
needs to be replaced, use the correct part
number fastener for that application. If the
correct part number fastener is not available,
a fastener of equal size and strength (or
stronger) may be used. Fasteners that are not reused, and those
requiring thread locking compound, will be
called out. The correct torque values must
be used when installing fasteners that
require it. If the above conditions are not
followed, parts or system damage could
result.
HEATING AND VENTILATION 1A Ð 1
SECTION 1A
HEATING AND VENTILATION
CONTENTS
PAGE
General Description.....................................................1AÐ 2
Heater...............................................................1AÐ 2
Control Lever Assembly................................................1AÐ 3
Ventilation...........................................................1AÐ 3
Air Select Knob.......................................................1AÐ 4
Air Source Select Lever................................................1AÐ 4
Fan Control Knob.....................................................1AÐ 4
Temperature Control Knob.............................................1AÐ 4
Ceramic Heater.......................................................1AÐ 5
On-Vehicle Service......................................................1AÐ 6
Heater Unit..........................................................1AÐ 6
Heater Core and/or Mode Door..........................................1AÐ 8
Heater Mode Control Link Unit..........................................1AÐ10
Heater Temperature Control Link Unit....................................1AÐ12
Blower Assembly.....................................................1AÐ14
Blower Link Unit and/or Mode Door......................................1AÐ16
Blower Motor........................................................1AÐ18
Rear Heater Duct, Defroster Nozzle and Ventilation Duct....................1AÐ20
Center and/or Side Vent...............................................1AÐ22
Control Lever Assembly and/or Control Cables............................1AÐ24
Control Panel Illumination Bulb..........................................1AÐ27
Resistor.............................................................1AÐ28
Ceramic Heater and/or Full Hot Switch...................................1AÐ30

AIR CONDITIONING 1B Ð 1
CAUTION
When fasteners are removed, always
reinstall them at the same location from
which they were removed. If a fastener
needs to be replaced, use the correct part
number fastener for that application. If the
correct part number fastener is not available,
a fastener of equal size and strength (or
stronger) may be used. Fasteners that are not reused, and those
requiring thread locking compound, will be
called out. The correct torque values must
be used when installing fasteners that
require it. If the above conditions are not
followed, parts or system damage could
result.
SECTION 1B
AIR CONDITIONING
CONTENTS
PAGE
General Description.....................................................1BÐ 3
Air Conditioning Refrigerant Cycle Construction...........................1BÐ 3
Compressor.........................................................1BÐ 4
Magnetic Clutch......................................................1BÐ 5
Receiver/Drier.......................................................1BÐ 5
Dual Pressure Switch.................................................1BÐ 6
Triple Pressure Switch................................................1BÐ 6
Expansion Valve......................................................1BÐ 6
Evaporator..........................................................1BÐ 7
Electronic Thermostat.................................................1BÐ 7
Refrigerant Line......................................................1BÐ 7
Service Charge Valve..................................................1BÐ 7
Air Conditioning Parts.................................................1BÐ 8
On-Vehicle Service......................................................1BÐ 13
Precautions For Replacement or Repair of Air Conditioning Parts.............1BÐ 13
Compressor Assembly and Associated Parts..............................1BÐ 23
Condenser Assembly (LHD V6 without Condenser Fan).....................1BÐ 33
Condenser Fan Motor.................................................1BÐ 35
Receiver/Drier.......................................................1BÐ 37
Pressure Switch......................................................1BÐ 39
Evaporator Assembly.................................................1BÐ 42
Evaporator Core and/or Expansion Valve.................................1BÐ 44
Electronic Thermostat.................................................1BÐ 47
A/C Switch and Illumination Bulb.......................................1BÐ 48
Refrigerant Line......................................................1BÐ 49
Rear Cooler Parts.....................................................1BÐ 51

AIR CONDITIONING 1B Ð 15
COMPRESSOR LEAKS
If leaks are located around the compressor shaft seal or
shell, replace or repair the compressor.
RECOVERY, RECYCLING, EVACUATION AND
CHARGING
Handling Refrigerant-134a (HFC-134a)
Air conditioning systems contain HFC-134a.
This is a chemical mixture which requires special
handling procedures to avoid personal injury.
·Always wear safety goggles and protective gloves.
·Always work in a well-ventilated area. Do not weld or
steam clean on or near any vehicle-installed air
conditioning lines or components.
·If HFC-134a should come in contact with any part of
the body, flush the exposed area with cold water and
immediately seek medical help.
·If it is necessary to transport or carry any container of
HFC-134a in a vehicle, do not carry it in the passenger
compartment.
·If it is necessary to fill a small HFC-134a container
from a large one, never fill the container completely.
Space should always be allowed above the liquid for
expansion.
·Keep HFC-134a containers stored below 40 ¡C (104¡F).
LEAK AT REFRIGERANT LINE CONNECTIONS
1) Check the torque on the refrigerant line fitting and, if
too loose, tighten to the specified torque.
·Use two wrenches to prevent twisting and damage
to the Line.
·Do not over tighten.
2) Perform a leak test on the refrigerant line fitting.
3) If the leak is still present, discharge and recover the
refrigerant from the system.
4) Replace the O-rings.
·O-rings cannot be reused. Always replace with
new ones.
·Be sure to apply specified compressor oil to the
new O-rings.
5) Retighten the refrigerant line fitting to the specified
torque.
·Use two wrenches to prevent twisting and damage
to the line.
6) Evacuate, charge and retest the system.
LEAK IN THE HOSE
If the compressor inlet or outlet hose is leaking, the entire
hose must be replaced. Refrigerant hose must not be cut
or spliced for repair.
1) Locate the leak.
2) Discharge and recover the refrigerant.
3) Remove the hose assembly.
·Cap the open connections at once.
4) Connect the new hose assembly.
·Use two wrenches to prevent twisting or damage
to the hose fitting.
·Tighten the hose fitting to the specified torque.
5) Evacuate, charge and test the system.

1B Ð 24 AIR CONDITIONING
3
4
2
7 86 1
5
4. Remove serpentine belt.
·Move serpentine belt tensioner to loose side using
wrench then remove serpentine belt.
5. Disconnect refrigerant line connector.
·When removing the line connector, the connecting
part should immediately be plugged or capped to
prevent foreign matter from being mixed into the
line
6. Remove compressor.
Installation
1) Install compressor.
·Tighten the compressor fixing bolts to the specified
torque.
Compressor Fixing Torque Nám (kgám / lbáft)
19 (1.9 / 14)
2) Connect refrigerant line connector.
·Tighten the refrigerant line connector fixing bolts
to the specified torque
Refrigerant Line Bolt Torque Nám (kgám / lbáft)
15 (1.5 / 11)
·O-rings cannot be reused. Always replace with new
ones.
·Be sure to apply new compressor oil to the O-rings
when connecting refrigerant lines.
3) Install serpentine belt.
·Move serpentine belt tensioner to loose side using
wrench, then install serpentine belt to normal
position.
850RY00001
Legend
(1) Tensioner
(2) Idle Pulley
(3) Cooling Fun Pulley
(4) Serpentine Belt
(5) Power Steering Oil Pump
(6) Air Conditioner Compressor
(7) Crankshaft Pulley
(8) Generator

1B Ð 26 AIR CONDITIONING
Removal
1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant.
·Refer to Refrigerant Recovery in this section.
3. Disconnect magnetic clutch harness connector.
4. Remove radiator fan shroud.
5. Remove radiator fan.
·When the fan is removed, be sure to tighten
the fan fixing nuts temporarily to their original
positions.
6. Remove serpentine belt.
·Move serpentine belt tensioner to loose side
using wrench, then remove serpentine belt.
Legend
(1) Tensioner
(2) Idle Pulley
(3) Cooling Fan Pulley
(4) Serpentine Belt
(5) Power Steering Oil Pump
(6) Air Conditioner Compressor
(7) Crankshaft Pulley
(8) Generator
7. Disconnect refrigerant line connector.
·When removing the line connector, the
connecting part should immediately be
plugged or capped to prevent foreign matter
from being mixed into the line.
8. Remove compressor.
Installation
1. Install compressor.
·Tighten the compressor fixing bolts to the
specified torque.
Compressor Fixing Torque Nám (kgám / lbáft)
19 (1.9 / 14)
2. Connect refrigerant line connector.
·Tighten the refrigerant line connector fixing
bolts to the specified torque.
Refrigerant Line Bolt Torque Nám (kgám / lbáft)
15 (1.5 / 11)
·O-rings cannot be reused. Always replace with
new ones.
·Be sure to apply new compressor oil to the O-
rings when connecting refrigerant lines.
3. Install serpentine belt.
·Move serpentine belt tensioner to loose side
using wrench, then install serpentine belt to
normal position.
4. Install radiator fan.
5. Install radiator fan shroud.
6. Connect magnetic clutch harness connector.
3
4
2
7 86 1
5
850RX003

1B Ð 28 AIR CONDITIONING
REMOVAL
Preparation:
·Battery ground cable
·Discharge and recover refrigerant (Refer to
ÒREFRIGERANT RECOVERYÓ in this section)
1. Air Duct (Turbo to air cleaner)
Cover up the air duct connecting portion to prevent
foreign materials from getting into the turbo and the
air cleaner.
2. Magnetic Clutch Harness Connector
3. Drive Belt
Loosen the power steering pump unit fixing bolts,
then loosen the drive belt adjustment bolt and
remove the drive belt.
4. Refrigerant Line Connector
5. Compressor
Drive belt
Power steering
pump Tension
adjustment bolt
INSTALLATION
5. Compressor
Tighten the compressor fixing bolts to the specified
torque.
Compressor Bolt Torque Nám (kgám / lbáft)
40 (4.1 / 30)
4. Refrigerant Line Connector
·O-rings cannot be reused. Always replace with new
ones.
·Be sure to apply new compressor oil to the O-rings
when connecting refrigerant lines.
·Tighten the refrigerant line connector to the
specified torque.
Refrigerant Line Bolt Torque Nám (kgám / lbáft)
27 (2.8 / 20)