brake sensor JAGUAR F TYPE 2014 1.G Quick Start Guide

DRIVING AIDS
8
DRIVING AIDS
9
JaguarDrive control and Dynamic Stability Control See page 2, items 29 and 30
Winter mode, Dynamic mode and Dynamic Stability Control (DSC) allow the driver to more finely tune the
vehicle driving characteristics to suit prevailing conditions.
1. Rain/ice/snow mode. Use in slippery road conditions.
2. Dynamic mode. Co-ordinates vehicle systems to deliver a high performance driving experience.
3. DSC. The default condition at engine start is DSC on and is designed to control vehicle stability.
DSC can be switched off if required. Press and hold the switch for more than 3 seconds.
The DSC warning lamp will illuminate and the Message center will display DSC Off until DSC is reinstated.
Turn DSC on again with a short press and release the switch.
TracDSC is an alternative setting that optimises the DSC settings for maximum traction. TracDSC enables a more involving and focused driving experience on dry tarmac.
Note: Normal stability control may be impaired.
To select TracDSC, press and hold the DSC switch for less than 3 seconds.
When TracDSC is selected, the DSC warning lamp will illuminate and the Message center will briefly display TracDSC.
Turn DSC on again with a short press and release the switch.
Note: Cruise control can only be used when DSC is on.
Blind spot monitor
Each mirror displays amber icons 1 to warn of overtaking vehicles in adjacent lanes. The monitored area extends approximately 20 ft (6m) behind the rear wheels and 8.2 ft (2.5m) to the sides.
It switches on automatically at speeds above 6 mph (10 km/h) while in a forward gear. The amber dot 2 is illuminated while speed is below the threshold.
Door mirrors and blind spot monitoring See page 2, item 47
Passenger side mirror dip when reversing
This feature can be used to improve the passenger side lower view while reversing. Mirror dip can be selected or deselected from the instrument panel menu. Select Features from the Vehicle Settings menu, then select the desired option from the list.
To set a dip position:
• With the Electric parking brake on, select reverse gear.
• Adjust the mirror position to view the passenger side lower rear kerb and vehicle.
Subsequently, each time reverse gear is selected, the set dip position will be automatically selected. The mirrors will return to their normal position when another gear is selected.
Parking aids See page 2, item 14
When reverse gear is selected, Parking aids at the rear and front will activate.
1. The touch screen will display a vehicle graphic and indicate the approximate distance to any object detected.
Note: Sensors may activate when water, snow or ice are detected on their surfaces. Make sure the sensors are cleaned regularly.
An audible alert will increase in frequency as the object is approached.
When moving forward into a space, you must manually activate the front sensors by pressing the Parking aid switch in the fascia panel.
The front sensors are deactivated when the vehicle speed exceeds 10 mph (16 km/h).
Audible alert volume can be adjusted via the touch screen. From the Home screen, select Setup, then System, then Volume presets. Use the + or - soft keys alongside Parking aid to adjust volume.
Alternative screen
Touch the screen to return to the previous view.
Rear camera
Activates when reverse gear is selected. The touch screen will display guidance lines to aid reversing.
Valet mode
The glove box, luggage compartment and touch screen can be security locked to deny access to a parking attendant. Before handing over your Smart key, remove the emergency key blade and keep it in a safe place.
To set a Personal Identification Number (PIN) :
• On the touch screen select Home menu.
• Now select Valet.
• Enter a 4 digit PIN (personally chosen) and touch OK. Valet on is displayed as a confirmation.
To deselect Valet mode
Access the Valet screen and enter your PIN. Now press OK. Valet off is displayed and the glove box and luggage compartment are now accessible.
Insert the emergency key blade back into the Smart key.Powerfold mirrors
Press both buttons simultaneously to fold the mirrors inward. Press again to unfold.
12
111
23
JJM189635142.indd 8-93/19/2013 12:21:48 PM