change wheel JAGUAR F TYPE 2014 1.G Quick Start Guide

32
DRIVER CONTROLSVEHICLE ACCESS
1. Central locking/unlocking
2. Seat adjustment
3. Driving position memory
4. Trip computer button
5. Turn signals and headlamp control
6. Gearshift down
7. Phone
8. Instrument panel, message center and warning lamps
9. Heated steering wheel
10. Gearshift up
11. Wiper/washers
12. Home menu
13. Climate menu
14. Touch screen Setup or Parking aid
15. Touch screen on/off or Rear camera
16. Audio/video mode selection
17. Phone menu
18. Audio/video menu
19. Navigation menu
20. Climate control
21. Power socket
22. Gear selector
23. Audio/video system on/off
24. Active exhaust
25. Roof up/down
26. Intelligent stop/start
27. Deployable spoiler switch
28. Electric parking brake
29. Stability control (DSC)
30. Driving mode
31. Engine STOP/START
32. Heated rear screen
33. Heated windshield
34. Windshield maximum defrost
35. Hazard warning lamps on/off
36. Climate control recirculation
37. Climate control on/off
38. Climate control AUTO mode
39. Cruise control or Automatic speed limiter (ASL)
40. Horn
41. Steering column adjuster
42. Audio/video mode selection
43. Audio/video and phone controls
44. Instrument illumination
45. Fog lamps on/off
46. Luggage compartment release
47. Exterior mirror controls
48. Window controls
Unlocking mode alternatives
To change between entry modes, with the vehicle unlocked, press the lock and unlock buttons simultaneously for 3 seconds. The hazard warning lamps will flash twice to confirm the change.
Smart key
Press once to lock the vehicle and arm the exterior alarm. To also close any open windows, press and hold for 3 seconds (Global closing). Multi-point entry - press once to disarm the alarm, unlock all doors and the luggage compartment.
Single-point entry - press once to disarm the alarm and unlock the driver’s door. A second press unlocks the passenger door and the luggage area.
Press and hold to also open the windows (Global opening).
With either method the door handles will be presented for opening.
Keyless entry and exit
While the Smart key is within 3 ft (1m) of the vehicle, simply press a door handle button to unlock the vehicle and disarm the alarm. Pressing the luggage compartment release button allows access to the luggage compartment but the vehicle doors remain locked.
To lock the vehicle and arm the alarm, first make sure the Smart key is outside the vehicle but within 3 ft (1m).
Single-locking - press the door handle gently, the door handle will retract. The doors and luggage compartment will lock and the exterior alarm will be activated. Doors can still be unlocked from inside the vehicle.
When locking it is advisable to have the hood up.
Smart key detection
The Smart key may not be detected if it is placed within a metal container or if it is shielded by a device with a back lit LCD screen, (e.g. laptop, smartphone etc.)
Loose coins in the same pocket as the Smart key can also act as a shield. Keep the Smart key clear of possible shielding when attempting Keyless entry or Keyless starting.
Smart key not found
If the Smart key is not detected and the message Smart Key Not Found is displayed, hold it in the indicated position. Start the engine as normal. The Smart key can now be removed.
Press once to switch the headlamps on for up to 120 seconds. Press again to switch off.
Press to open only the luggage compartment. The rest of the security system remains active.
Press and hold for 3 seconds to activate/cancel the panic alarm.
Smart key detection
Do not leave your Smart key within the luggage compartment, the vehicle WILL NOT automatically unlock (should it become shielded).
SET
CAN
MODE
MENU
OK
56#46
275*
'0)+0'5612
#761 /#:(4
#%
#761
/#:(4
#%
12
47
45
6
29
30
31
3940414243444546
20
21
23
24
22
2528
12131415
16
17
18
19
1110987
38373635343332
48
32627
E134355
JJM189635142.indd 2-33/19/2013 12:21:43 PM

NAVIGATION
14
TELEPHONE
15
Touch screen navigationCalls via the touch screen
With a phone paired and active, press the PHONE button below the touch screen.
1. Select Digit dialing, Phonebook or Last 10. With Digit dialing selected, use the keypad to enter the number. With Phonebook selected, choose a number from the downloaded phonebook. Last 10 displays the previous 10 calls. Choose one to dial.
2. To make the call touch the connect icon . The icon will change to a connected call icon.
3. To end a call touch .
Phonebook
Last 10
Phone10:36
Digit dialing Settings
DeleteChang
e
phone
Name
01234567890_
Use
handsetPQRS TUVWXYZ
1ABC
DEF
JKL MNO
GHI2
3
4 5
6
7 8
9
0 #
+
On initial activation, make sure that both the correct country and search area have been selected.
For more information refer to the Navigation section of the Owner’s Handbook.
NOTE: To access navigation press either the N AV hard key or touch the Nav icon on the Home menu.
1. Use to enter a new destination. Provides a choice of options when entering a destination.
2. Displays previous destinations entered. Previous destinations can be selected as a new destination.
3. Turns the POI (Point Of Interest) icons on the map on/off.
4. When a destination is set, the Jaguar logo in this position is replaced by a soft key which enables the last voice instruction to be repeated.
5. Soft key is highlighted while voice guidance is enabled. Touch to turn voice guidance off.
6. POI shortcuts: Touch icon to list available POIs that are close to the vehicle position.
7. Calculates a detour from the current route.
8. Advances to the main map screen.
9. There are 2 navigation menu screens. Use the More... soft key to toggle between them. The second map screen features the following soft keys. Stored locations. Used to manage the stored data. TMC (Traffic Message Channel). Provides data about road conditions and any events that may affect the current route. Route options. Allows selection of various options for the route. Nav set-up. For setting personal preferences within the navigation system.
10.
Cancel current route guidance.
Selecting navigation
When navigation is selected after the ignition is turned on, a caution screen is displayed. Touch Agree.
Note: At the first time of accessing the caution screen, set the required language.
Setting a destination
Select Destination entry.
Select Address and enter address details using the keyboard. As each part of the address is refined, touch OK or List to display all the streets and towns that are available for selection. If the house number is not known, press OK, the mid-point of the road is then used as the destination.
When the address entry fields are complete, press OK to move to the map screen.
Start guidance
The map screen will display the selected destination.Touch GO to start route calculation. Touch Review route if you want to take an alternative route.
Touch Go to start guidance.
Review route
There will be a choice of 3 routes or Change route. 3 routes will display 3 different route options on the map. Select Route 1, 2 or 3 by touching the respective box displayed on the right side of the map and then select GO.

Bluetooth® wireless technology devices See page 2, items 7 and 43
Connection must be made with ignition on or engine running.
Use the following procedure in conjunction with your phone manufacturer’s instructions.
Pairing and connecting using your phone
NOTE: The process of pairing and connecting a phone to the vehicle will vary depending on the type of phone used.
1. Switch the ignition on and make sure the touch screen is active.
2. From the Home menu, select Phone.
3. If no phone is connected, select Search new, otherwise select Change phone and then select Search new.
4. Select Device to vehicle option.
NOTE: The vehicle’s Bluetooth wireless technology system is discoverable for only 3 minutes.
5. Using your phone, search for Bluetooth wireless technology devices. On some phones, this is referred to as new paired device. See your phone’s operating instructions for further information.
6. When the vehicle’s system is discovered, begin the pairing process and follow the on-screen instructions.
7. When requested, enter a PIN of your choice into your phone and the vehicle system. Select OK.
8. When your phone is paired and connected, a confirmation message will be displayed.
NOTE: Some phones require the pairing to be set as ‘authorised’ or ‘trusted’ in order to automatically connect. Please refer to your phone’s operating instructions for further information.
Downloading phonebook entries
When a phone with phonebook download capability is paired and docked, its phonebook directory can be automatically downloaded to the vehicle system.
See PHONEBOOK in the Owner’s Handbook for more information.
Bluetooth Connectivity
Compatible Bluetooth wireless technology devices can communicate with the vehicle’s in-built telephone system. For the latest compatibility information, refer to the Owners Section at www.jaguarusa.com.
Calls via the steering wheel controls
1. Press to answer an incoming call. Press and release to make a call. Press and hold to display Phonebook.
2. Press to move up a displayed list. While in a call, press to increase volume.
3. Press to move down a displayed list. While in a call, press to decrease volume.
4. Press to go to Last 10 list of dialled, received and missed calls.
5. Press to move through the Last 10 list. After the last item the list will exit.
Nav menu: 1 of 2
Return to
mapMore...DetourCancel
guidance
Destination
entry Previous
destinationRoute voice guidance
17:40
DestinationPreviousdt iti
P+
12354
89
7
6
10
Display POI
POI
Nav
2
4
3
1
5
Operating notes
• Phone reception is dependent on the phone and network signal. Performance may be improved by changing your phone’s settings (e.g. turning off 3G).
• If echo is experienced when using the phone, reduce the audio system volume during the call.
JJM189635142.indd 14-153/19/2013 12:21:56 PM