steering wheel adjustment JAGUAR F TYPE 2015 1.G Quick Start Guide

2
DRIVER CONTROLSVEHICLE ACCESS
1. Central locking/unlocking.
2.
Seat adjustment.
3

.
Dr
iving position memory.
4.

T
rip computer.
5.

T
urn signals and headlamp control.
6.

Gearshift do
wn.
7.

Phone
.
8.

Instr
ument panel, Message center and warning

lamps.
9.

Heated steer
ing wheel.
10.
Gearshift up

.
11.
Wiper/w

ashers.
12.
Home men

u.
13.
Climate men

u.
14.
T

ouch screen on/off or Parking aid.
15.
T

ouch screen Setup or Rear camera.
16.
A

udio/video mode selection.
17.
Phone men

u.
18.
A

udio/video menu.
19.
Na

vigation menu.
20.
Climate control.
21.
P

ower socket.
22.
Gear selector

.
23.
A

udio/video system on/off.
24.
Activ

e exhaust.
25.
Con

vertible roof switch. 26. Intelligent stop/star
t.
27.
Deplo

yable rear spoiler switch.
28.
Electr

ic parking brake.
29.
Stability control.
30.
Dr

iving mode.
31.
ST

OP/START.
32.
Heated rear screen.
33.
Heated windshield.
34.
Windshield maxim

um defrost.
35.
Hazard w

arning lamps on/off.
36.
Climate control recirculation.
37.
Air conditioning on/off

.
38.
Climate control A

UTO mode.
39.
Cr

uise control or Automatic speed limiter.
40.
Hor

n.
41.
Steer

ing wheel adjuster.
42.
A

udio/video mode selection.
43.
A

udio/video and phone controls.
44.
Instr

ument illumination.
45.
F

og lamps on/off.
46.
T

runk/tailgate release.
47.
Exter

ior mirror controls.
48.
Windo

w controls.
Note: Steering wheel design may differ.
Smart key
Press once to lock the vehicle and arm the alarm.
To also close any open windows, press and hold
for 3 seconds (Global closing).
Multi-point entry - press once to disarm the
alarm, unlock all of the doors and the trunk.
Single-point entry - press once to disarm
the alarm and unlock the driver’s door. A second press
unlocks the passenger door and the trunk.
Press and hold to open the windows (Global opening).
The door handles will be presented for opening.
To change between entry modes, with the vehicle
unlocked, press the lock and unlock buttons
simultaneously for 3 seconds. The hazard warning lamps
will flash twice to confirm the change .
Press once to switch the headlamps on for up to
120 seconds. Press again to switch off.
Press to open only the trunk/powered tailgate.
The rest of the security system remains active. Press and hold for 3 seconds to
activate/cancel the panic alarm.
Smart key detection
The Smart key may not be detected if it is placed in
a metal container, or if it is shielded by a device with
a back lit LCD screen, (e.g., laptop, smartphone,
etc.).
Loose coins in the same pocket as the Smart key
can also act as a shield. Keep the Smart key clear
of possible shielding when attempting Keyless entry
or Keyless starting.
Powered tailgate See page 2, item 46
To open:
1. With transmission P selected, press the external
tailgate release.
2. Press the internal tailgate release.
Alternatively, use the Smart key.
The powered tailgate will continue to open to the set
height.
To close:
3. Press and release.
If an obstruction is detected during closing, the tailgate
will stop and then reverse direction slightly. An audible
warning will indicate a mislock.

COMFORT ADJUSTMENTS
4
STARTING AND DRIVING
Setting the driving position See page 2, items 2, 3, 41 and 48
Driver’s seat
Set the seat position using the following controls.
1.
Seatbac
k angle.
2.

Lumbar suppor
t.
3.

Memor
y preset buttons 1, 2 and 3.
4.

Memor
y set button.
5.

Seat f
orwards and backwards, cushion height and

cushion angle

.
6.

Side bolsters inflate and deflate
.
7.

With the v
ehicle stationary, adjust tilt and reach of the

steer

ing wheel to your ideal driving position.
8.

Press the left or r
ight mirror selector. Use the mirror

adjuster to set the mirror positions

.
Storing the driving position to memory
When the driver’s seat, steering wheel and door mirrors
are adjusted to the required position, the settings can be
stored.
Press the memory set button to activate the memory
store function. The button will illuminate to indicate that
the memory store function is active.
Within 5 seconds, press button 1, 2 or 3 to store the
current driving position.
A stored memory position can now be recalled with
a press of the appropriate button. The driver’s seat,
steering wheel and mirrors will move to their preset
positions.
Time limit
Memory buttons must be pressed within 5 seconds
of pressing the memory set button, otherwise the
memory store function will cancel.
Engine start/stop See page 2, item 31
Ignition on:
• With the Smart key inside the vehicle, press the START/STOP button to switch on the ignition. A
second press will switch off the ignition.
Engine start
• The transmission must be in the P or N position.
• With the brake pedal pressed, press and release the START/STOP button to start the engine.
Engine stop
• With transmission P selected and the EPB applied,
press to stop the engine and switch off the ignition.
Transmission See page 2, item 22
1. Press the brake pedal before and while the selector is
moved from the P position.
2. The selector release button must be pressed when
moving from P or N.
3. Move the selector backwards to D or forwards to N or
forwards again to R . An LED on top of the selector will
illuminate to indicate current gear selection.
4. To select S mode when in D, move the selector to the
left. The selector can now be moved forwards to move
up a gear and backwards to move down a gear. To
return to fully automatic mode, move the selector
back to D.
5. To select Park , simply press the P switch on top of
the selector. This can be done while in any gear
selection. The vehicle must be stationary when P
is selected.
If the engine is switched off with any other gear still
selected, the transmission will automatically return to P.
Towing the vehicle
If the engine is switched off with N selected, automatic
selection of P is delayed for 10 minutes. This allows
enough time for the vehicle to be conveyed through
an automatic car wash. DO NOT use this feature
to enable towing of the vehicle. Refer to Vehicle
recovery in the Owner’s Handbook.
Convertible roof See page 2, item 25
To operate the convertible roof, the ignition must be on
and road speed must be below 30 mph (50 km/h).
1.

T
o open the roof, press and hold down the front of the



switch.
2.

A w
arning will sound, the windows will open and the

roof will star

t to move. The warning will sound again

when the roof is fully open.
3

.
No
w release the switch.
Closing is the reverse of this procedure. Pull up the front
of the switch until the roof is fully closed and latched.