light JAGUAR X TYPE 2002 1.G Owners Manual

X-type Jaguar
Unclip the Bluetooth wiring at the floor and now the
entire centre console can be lifted up and out of the car.
The Bluetooth module is fastened
to the side of the centre bin by
velcro:
Now remove the ashtray by undoing the two
Phillips screws at the bottom and lift it out
carefully until you can reach behind it and unclip
the wiring (2 connectors) for the cigar lighter The
orange cable and connector in the picture (note
tea still not drunk).
Remove the trim finisher by easing forward to reveal the
two retaining bolts at the bottom of the CD player

X-type Jaguar
With a small flat blade screwdriver gently
ease forward and up the trim around the
hazard light switch at the top of the screen
revealing the two torque retaining bolts for
the entertainment unit.
Undo all four bolts and ease the whole
entertainment unit forward until you can see and
access the connectors for the hazard lights and
heated seat switches – unclip and ease unit forward
until access is possible to the main cable feeds to it.
TIP Cover the gear stick with a soft cloth to prevent
accidental damage to your screen
0
Unclip the aerial connector, two large connectors and
the fibre optic cables.
The unit should now be free and you can lift it away
to store safely until needed.
Now it’s time to make the new connections
for the ACM and decide where you will
position the box itself – I put it flat on top of
the foam padding at the rear of the void
which was clear of both the ashtray and the
entertainment unit when fitted.