length JAGUAR X TYPE 2004 1.G EGR Cleaning Manual

X-type Jaguar
EGR Intercooler Hose
Is located on the driver’s side at the front of the engine near to the radiator, this rubber hose
connects the EGR valve with the intercooler and is held in place at either end by a threaded
Jubillee clip. This hose is a notorious weak spot on the X-type, as it often splits causing engine
management and usability problems. (If it does split you will hear it make a loud sucking noise
when the engine is running).
The hose is made of 5mm thick reinforced rubber and is similar in appearance to other hoses
typically found as part of a vehicle’s engine cooling system, although in this case the hose only
has gases (not liquids) passing through it.
Outer Dimensions:
Length 280mm


Diameter 60mm Thickness 5mm
There are two offset bends in the pipe:
Inner Dimensions:
Diameter 55mm Thickness 5mm