ESP JAGUAR XF 2012 1.G Quick Start Guide

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
JaguarDrive control JaguarDrive control See page 3, items See page 3, items 17, 20 17, 20 and 21 and 21 and Parking aids Parking aids
Glovebox valet mode
Door mirrors and blind spot monitoring Door mirrors and blind spot monitoring
Driving aidsDriving aids
Winter mode, Dynamic mode and Dynamic Stability Control (DSC) allow the driver to more finely tune the vehicle driving characteristics to suit prevailing conditions.
Winter mode.1. Use in slippery road conditions. Selects 2nd gear for driving away, moderates engine response and modifies gear change strategy to ensure maximum possible traction is achieved.
Dynamic mode.2. Optimises vehicle systems to deliver a high performance driving experience. If Sport mode is now used with paddle gear selection, there is no automatic gear change, even if the rev limit is reached. Dynamic mode remains selected for six hours after the engine is switched off
DSC.3. The default condition at engine start is DSC on and is designed to control vehicle stability.
2
13
TracDSC is an alternative setting that optimises the DSC settings for maximum traction in difficult conditions. TracDSC enables a more involving and focused driving experience. To select TracDSC, press and release the button. Touch again to return to DSC. To turn DSC off, press for more than 10 seconds.
Message centre
The message centre displays the JaguarDrive Selector position, P, R, N, D or S, the manual mode gear selections 1 to 6 (or 1 to 8) and the JaguarDrive Control mode selection.
When TracDSC is selected, the DSC warning lamp will illuminate and the message centre will briefly display TRAC DSC.
When DSC OFF is selected, the DSC warning lamp will illuminate and the message centre will display DSC OFF until DSC is reinstated.
Driving mode settings
Refer to the Owner’s Handbook section, Stability control, for examples of JaguarDrive settings.
Blind spot monitoring
Each mirror displays amber icons to warn of overtaking vehicles in adjacent lanes. The monitored area extends approximately 20 ft (6 meters) behind your rear wheels and 8.2 ft (2.5 meters) to the sides.
It switches on automatically at speeds above 10mph (16km/h) while in a forward gear. An amber dot illuminates when speed is below the threshold.
Mirror dip when reversing
This feature can be used to improve lower side views while reversing. It can be enabled or disabled via the touch screen. From the Home screen, select Vehicle, then Veh.settings, then Parking.
To set a dip position:
• with the electric parking brake on, select reverse gear
• adjust the mirror position to view the lower rear kerb and vehicle.
Subsequently, each time reverse gear is selected, the set dip position will be automatically selected. The mirrors will return to their normal position when another gear is selected.
8 9
When Reverse is selected, the rear and front parking aids and rear view camera will activate.
The touch screen will display a vehicle graphic and indicate the approximate distance to any object detected. An audible alert will increase in frequency as the object is approached.
When moving forward into a space, activate the front sensors with the parking aid switch in the overhead panel. Alternatively, select R then Drive.
Audible alert volume can be adjusted via the touch screen. From the Home screen, select Set-up, then System, then Volume presets. Use the + or - softkeys alongside Parking aid to adjust volume.
Cancelling the parking aid screen
Touch the screen to return to the previous view.
Rear view camera
Activates when Reverse is selected. Guidance lines to aid reversing appear on the touch screen. The camera display has priority over the parking aid display. To view the parking aid display instead, or cancel the display at any time, touch the display.
The camera is deactivated when Drive is selected and vehicle speed exceeds 10 mph (16 km/h).
Note:Sensors may activate when water, snow or ice are detected on the surface of the sensors. Ensure that the sensors are cleaned regularly.
To open the glovebox, press the facia mounted switch.
Valet mode
The glovebox and luggage compartment can be security locked to deny access to a parking attendant. Before handing over your Jaguar Smart Key, remove the emergency key blade and keep it in a safe place.
To set your Personal Identification Number (PIN) :
• On the touch screen select Home menu.
• Now select Valet.
• Enter a your four digit PIN (personally chosen) and touch OK. Valet on is displayed as a confirmation.
To deselect valet mode
Access the Valet screen and enter your PIN. Now press OK. Valet off is displayed and the glovebox and luggage compartment are now accessible.
Insert the emergency key blade back into the Jaguar Smart Key.
JJM189640121.indd 8-9JJM189640121.indd 8-9JJM189640121.indd 8-921/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:41

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
NavigationTelephone
14
15
Touch screen navigation Touch screen navigation Bluetooth® phones phones See page 3, item See page 3, item 3
On initial activation, ensure that both the correct country and search area have been selected.
For more information refer to the Navigation section of the Owner’s Handbook.
Setting a destination
From the 1.Nav menu screen, select Destination entry.
Select 2.Address from the Destination entry screen and input the town name.
Once sufficient letters have been entered, touch 3.Listto display all the possible towns. Select the town.
Enter road name. Once sufficient letters have been 4.entered, touch List to display all the possible roads. Select the road.
Enter the house number (if known) then touch 5.OK to confirm. If the house number is not known, touch OK - the mid point of the road is then used as a destination.
Touch 6.Destination to begin calculation of the route options.`
There is now a choice to select 7.3 Routes, Change route or to Start navigation guidance.
Touch 8.3 Routes to display a choice of alternative routes. To use an alternative route, touch the respective box 1, 2 or 3 displayed on the right side of the map.
Touch 9.Go to commence guidance.
The selected route will be displayed and guidance will 10.begin. When your destination is reached, voice and visual confirmation is given.
If the map is moved away from your current location, the position icon will be replaced by a touch button near the top left of the screen. Touch to bring the current location map back into view.While navigation is operating, touch to repeat the last given navigation instruction.
Select Device to vehicle option when using a
iPhone®.
Nav
Cancelling guidance
To cancel guidance, select Nav menu on the map menu and then Cancel guidance.
Compatible Bluetooth® phones can communicate with ® phones can communicate with ®
the vehicle’s inbuilt telephone system. Connection must be made with ignition on or engine running.
Pairing and connecting using the touch screen
Up to 10 mobile phones can be paired. Ensure your
Bluetooth® phone is in ‘discoverable’ mode, sometimes ® phone is in ‘discoverable’ mode, sometimes ®
referred to as ‘find me’ mode. See your operating instructions for more information.
From the Home menu1., select Phone.
A menu will appear. Select 2.Search new.
Select 3.Vehicle to device option.
Indentify your phone from the list and select 4.Pair and connect option.
When prompted, enter the PIN code into your phone. 5.See your operating instructions for more information.
Confirmation of connection will be displayed before 6.switching to the Digit Dial screen.
Changing a connected phone
To change from the currently connected phone to another that has already been paired, follow the steps below:
1. From the Home menu,select Phone.
2. A menu will appear. Select Change phone.
3. Select your phone from the displayed list.
4. Confirmation of connection will be displayed before switching to the Digit Dial screen.
Downloading phonebook entries
When a phone with phonebook download capability is paired and docked, its phonebook directory will automatically download to the vehicle system.
The vehicle phonebook will be updated each time a mobile phone is docked to the system.
Jaguar Bluetooth® Connectivity® Connectivity®
For the latest compatibility information, refer to the Ownership section of the Jaguar website at www.jaguar.com
Bluetooth® selection® selection®
When the starter is turned on, the vehicle searches for up to 10 previously connected phones, starting with the most recent connection.
Telephone echo
If echo is experienced when using the phone, reduce the audio system volume during the call.
Calls via the touch screen
Making a call
1. With a paired and active phone, select Phone from
the Home menu.
2. From the Digit dial screen, enter the number using
the on-screen keypad.
3. Touch icon on the screen to make the call.
4. To end a call touch .
Calls via the steering wheel controls
Volume control. Turn to increase/decrease call 1. volume.
Scroll control. Turn to scroll up/down lists of calls or 2. phone book entries.
Phone/Voice control. Press and release to send, 3. accept or end a call. If Voice control is not fitted, in addition to the above, press and release to access last 10 dialed list; press and hold to access the phonebook search view.
2
3
1
5GVVKPIU
&GNGVG
2JQPGDQQM
&KIKVFKCNName
01234567890_
2JQPG
123
456
789
0#$% &'(
)*+ ,-. /01
2345 6789 :;<
.CUV
%JCPIG2JQPG

JCPFUGV 7UG
'OGTIGPE['OGTIGPE['OGTIOGTIGPE[E[

0CX
&WPOQTG4QCF)25
5GVOGOQT[
RQKPV&GUVKPCVKQP 5GVKPVGTGUV 2QKPVQH
0CXOGPW
MOMO
%CPEGN
DTQYUG
OQFG


JJM189640121.indd 14-15JJM189640121.indd 14-15JJM189640121.indd 14-1521/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:4721/03/2011 13:48:47

JAGUAR XF JAGUAR XF JAGUAR XF
Part No. JJM 18 96 40 121 © Jaguar Cars Limited16
Gas station information
Gas filler location
Gas filler flap opening
The fuel filler flap can be opened only when the vehicle is unlocked. Press the fuel filler flap firmly approximately 1.4 in (35mm) from the rear edge and release.
Gas cap
Twist the cap counter-clockwise to release.
A hook is provided on the flap hinge to hold the cap while refuelling. After refuelling, tighten the cap until it clicks three times.
Fuel specification
The correct fuel specification for your vehicle is shown on the inside of the gas filler flap.
A small arrow on the gas gauge indicates which side the gas filler is located.
Incorrect fuelling
Do not use E85 fuels (85% Ethanol content). Equipment necessary for the use of fuels containing more than 10% Ethanol is not fitted to this vehicle. If E85 fuels are used serious engine and fuel system damage will occur.
Avoid using fuel containing Methanol. If it is unavoidable, do not use a fuel with more than 10% Methanol content. The fuel must contain co-solvents and corrosion inhibitors. Fuel system damage and engine performance problems can occur when Methanol is used.
No responsibility is accepted for damage caused by using incorrect fuels.
If the vehicle is filled with the wrong type of fuel:
•DO NOT start the engine!
•Call for qualified assistance!
Hood release
The hood release is located in the left hand front footwell.
Tire pressure label location
Tire pressures are shown on a label attached to the driver’s side centre doorpost.
FrontBack
Normal Driving
Laden/
High Speed