instrument panel JEEP CHEROKEE OVERLAND 2014 User Guide

4
UNDERSTANDING YOUR INSTRUMENT PANEL 287

4
UNDERSTANDING YOUR INSTRUMENT PANEL 291

4
UNDERSTANDING YOUR INSTRUMENT PANEL 299

4
UNDERSTANDING YOUR INSTRUMENT PANEL 301

4
UNDERSTANDING YOUR INSTRUMENT PANEL 303

4
UNDERSTANDING YOUR INSTRUMENT PANEL 305

4
UNDERSTANDING YOUR INSTRUMENT PANEL 369

4
UNDERSTANDING YOUR INSTRUMENT PANEL 377

The system requires that the engine be running for all
changes. When lowering the vehicle all of the doors,
including the liftgate, must be closed. If a door is opened
at any time while the vehicle is lowering the change will
not be completed until the open door(s) is closed.
The Quadra-Lift™ air suspension system uses a lifting
and lowering pattern which keeps the headlights from
incorrectly shining into oncoming traffic. When raising
the vehicle, the rear of the vehicle will move up first and
then the front. When lowering the vehicle, the front will
move down first and then the rear.
After the engine is turned off, it may be noticed that the
air suspension system operates briefly, this is normal. The
system is correcting the position of the vehicle to ensure
a proper appearance.To assist with changing a spare tire, the Quadra-Lift™ air
suspension system has a feature which allows the auto-
matic leveling to be disabled. Refer to “Electronic Vehicle
Information Center (EVIC)” in “Understanding Your
Instrument Panel” for further information.
NOTE:
If equipped with a touch screen radio all
enabling/disabling of air suspension features must be
done through the radio. Refer to “Uconnect® Access
Settings” in “Understanding Your Instrument Panel” for
further information.