fuse JEEP COMPASS 2012 1.G User Guide

Flashers.............................. 380
Hazard Warning ..................... 380
Turn Signal .................... 88,197,444
Flooded Engine Starting ................... 295
Fluid Capacities ......................... 445
Fluid Leaks ............................. 88
Fluid Level Checks Automatic Transmission ................ 430
Power Steering ...................... 309
Fluid, Brake ........................... 447
Fluids ................................ 446
Fluids, Lubricants and Genuine Parts .......... 446
Fog Lights ....................... 149,208,443
Folding Rear Seat ........................ 144
Folding Rear Seat (Sedan) .................. 144
Four Wheel Drive ....................... 307
Systems ........................... 307
Four Wheel Drive Operation ................ 307
Freeing A Stuck Vehicle ................... 396 Fuel
.............................. 357,446
Adding ........................... 361
Additives .......................... 359
Capacity ........................... 445
Clean Air .......................... 357
Ethanol ........................... 358
Filler Cap (Gas Cap) .................. 361
Gasoline ........................... 357
Gauge ............................ 196
Light ............................. 197
Materials Added ..................... 359
Methanol .......................... 358
Octane Rating ....................... 357
Requirements ....................... 357
Tank Capacity ....................... 445
Fuel System Caution ..................... 362
Fueling ............................... 361
Fuses ................................ 438
10
INDEX 481

HomeLink® (Garage Door Opener) Transmitter... 160
Hood Release .......................... 146
Ignition ............................... 12
Key ............................... 12
Ignition Key Removal ..................... 12
Immobilizer (Sentry Key) ................... 15
Infant Restraint .......................... 76
Information Center, Vehicle ................. 211
Inside Rearview Mirror .................... 94
Instrument Cluster ....................... 196
Instrument Panel and Controls .............. 194
Instrument Panel Cover ................... 436
Instrument Panel Lens Cleaning ............. 437
Integrated Power Module (Fuses) ............ 438
Interior Appearance Care .................. 435
Intermittent Wipers (Delay Wipers) ........... 154
Introduction ............................. 4 Jack Location
........................... 383
Jack Operation ....................... 382,384
Jacking Instructions ...................... 384
Jump Starting .......................... 392
Key-In Reminder ......................... 14
Key, Programming ........................ 16
Key, Replacement ........................ 16
Key, Sentry (Immobilizer) ................... 15
Keyless Entry System (Sedan) ................ 20
Keys ................................. 12
Knee Bolster ............................ 61
Lane Change and Turn Signals .............. 444
Lap/Shoulder Belts ....................... 43
Latches ................................ 88
Hood ............................. 146
Lead Free Gasoline ...................... 357
Leaks, Fluid ............................ 88
10
INDEX 483

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENTSpecial design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained personnel.
The following must be observed during installation.
The positive power connection should be made directly to
the battery and fused as close to the battery as possible. The
negative power connection should be made to body sheet
metal adjacent to the negative battery connection. This
connection should not be fused.
Antennas for two-way radios should be mounted on the roof
or the rear area of the vehicle. Care should be used in
mounting antennas with magnet bases. Magnets may affect
the accuracy or operation of the compass on vehicles so
equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use only
fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to ensure
a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interference
between the communications equipment and the vehicle’s
electronic systems.