battery JEEP COMPASS 2017 2.G Owner's Guide

To turn confirmation prompts on or off using Voice Com-
mand:
1. Push the Phone
button to begin.
2. After the “Ready” prompt and the following beep, say:•“Setup Confirmations Prompts On”
• “Setup Confirmations Prompts Off”
Phone And Network Status Indicators
If available on the radio and/or on a premium display such
as the instrument panel cluster, and supported by your
mobile phone, the Uconnect Phone will provide notifica-
tion to inform you of your phone and network status when
you are attempting to make a phone call using Uconnect
Phone. The status is given for roaming, network signal
strength, phone battery strength, etc.
Dialing Using The Mobile Phone Keypad
You can dial a phone number with your mobile phone
keypad and still use the Uconnect Phone (while dialing via
the mobile phone keypad, the user must exercise caution
and take precautionary safety measures). By dialing a
number with your paired Bluetooth mobile phone, the audio will be played through your vehicles audio system.
The Uconnect Phone will work the same as if you dial the
number using Voice Command.
NOTE:
Certain brands of mobile phones do not send the
dial ring to the Uconnect Phone to play it on the vehicle
audio system, so you will not hear it. Under this situation,
after successfully dialing a number the user may feel that
the call did not go through even though the call is in
progress. Once your call is answered, you will hear the
audio.
Mute/Un-Mute (Mute ON/OFF)
When you mute the Uconnect Phone, you will still be able
to hear the conversation coming from the other party, but
the other party will not be able to hear you. To mute the
Uconnect Phone:
• Push the Voice Command
button.
•Following the beep, say “Mute.”
To un-mute the Uconnect Phone:
• Push the Voice Command
button.
•Following the beep, say “Mute off.”
384 MULTIMEDIA

Gear Ranges........................ .206, 211
Special Additives .....................301, 303
Axle Fluid ...............................342
Battery ..................................114
Charging System Light .....................114
Belts, Seat ............................... .192
Body Mechanism Lubrication ..................292
B-Pillar Location .......................... .309
Brake Assist System ........................ .132
Brake Fluid ...............................342
Brake, Parking ............................ .200
Brakes ................................. .332
Brake System ..........................299, 332
Master Cylinder ........................ .299
Parking ...............................200
Warning Light ...........................112
Brake/Transmission Interlock ..................205
Bulb Replacement ..........................245
Bulbs, Light .......................... .194, 245
Calibration, Compass ........................108
Camera, Rear ............................ .219
Capacities, Antifreeze (Engine Coolant) ...........339
Capacities, Fluid .......................... .339Caps, Filler
Fuel ................................. .221
Oil (Engine) ..................... .284, 285, 288
Power Steering ..........................215
Radiator (Coolant Pressure) .................297
Carbon Monoxide Warning ................191, 338
Cargo Area Cover ...........................75
Cargo Area Features .........................75
Cargo Compartment .........................75
Light ..................................75
Luggage Carrier ..........................92
Cargo Light ...............................75
Cargo Load Floor ...........................76
Cargo Tie-Downs ...........................77
Car Washes ...............................326
Cellular Phone ........................ .371, 401
Center High

Mounted Stop Light ...............247
Certification Label ..........................222
Chains, Tire ............................. .323
Changing A Flat Tire .....................251, 305
Check Engine Light (Malfunction Indicator Light). . . .127
Checking Your Vehicle For Safety ...............191
Checks, Safety ............................ .191
Child Restraint ............................174
12
INDEX 413

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.