lumbar support JEEP GRAND CHEROKEE 2017 WK2 / 4.G User Guide

Power Adjustment Front
Some models may be equipped with eight-
way power driver and front passenger seats.
The power seat switches are located on the
outboard side of the seat. There are two
switches that control the movement of the
seat cushion and the seatback.
Forward/Rearward Power Front
Height Adjustment:Use the front or rear part of
the switch to modify the height and/or angle
of the seat cushion.
Forward/Backward Push the switch forward to
or backward to move the seat in the corre-
sponding direction.
Backrest Power Front
Angle Adjustment: Use the top part of the
switch to modify the angle of the seatback.
Power Lumbar — If Equipped
Vehicles equipped with power driver or pas-
senger seats may also be equipped with
power lumbar. The power lumbar switch is
located on the outboard side of the power
seat. Push the switch forward to increase the
lumbar support. Push the switch rearward to
decrease the lumbar support. Pushing up-
ward or downward on the switch will raise and
lower the position of the support.
Manual Adjustment Rear
Forward/Rearward Manual Rear
Either side of the rear seat can be lowered to
allow for extended cargo space and still main-
tain some rear seating room.
NOTE:
Be sure that the front seats are fully upright
and positioned forward. This will allow the
rear seatback to fold down easily.
Power Seat Switches
1 — Forward/Rearward Switch
2 — Backrest Switch
Power Lumbar Switch
25