light JEEP RENEGADE 2016 1.G Manual PDF

Forward Collision Indicator Light — If Equipped
Yellow Telltale
LightWhat It Means
Forward Collision Indicator Light
This telltale will turn on warn you of a possible collision with the vehicle in front of you.
Forward Collision Warning Off Indicator Light — If Equipped
Yellow Telltale
LightWhat It Means
Forward Collision Off Indicator Light
This light indicates the Forward Collision Warning is off.
5
GETTING TO KNOW YOUR INSTRUMENT CLUSTER 209

Loose Fuel Filler Cap Indicator Light — If Equipped
Yellow Telltale
LightWhat It Means
Loose Fuel Filler Cap Indicator Light
This light will illuminate when fuel filler cap is loose. Properly close the filler cap to disen-
gage the light. If the light does not turn off, please see your authorized dealer.
Audio System Failure Light — If Equipped
Yellow Telltale
LightWhat It Means
Audio System Failure Light
The telltale illuminates to report a failure of the Audio System.
Contact your authorized dealership as soon as possible.
210 GETTING TO KNOW YOUR INSTRUMENT CLUSTER

Green Telltale Indicator Lights
Turn Signal Indicator Lights
Green Telltale
LightWhat It Means
Turn Signal Indicator Lights
The instrument cluster arrow will flash independently for the LEFT or RIGHT turn signal as
selected, as well as the exterior turn signal lamp(s) (front and rear) as selected when the mul-
tifunction lever is moved down (LEFT) or up (RIGHT).
Park/Headlight ON Indicator Light
Green Telltale
LightWhat It Means
Park/Headlight ON Indicator Light
This indicator will illuminate when the park lights or headlights are turned on.
5
GETTING TO KNOW YOUR INSTRUMENT CLUSTER 211

Front Fog Indicator Light — If Equipped
Green Telltale
LightWhat It Means
Front Fog Indicator Light
This indicator will illuminate when the front fog lights are on.
Cruise Control Engaged Indicator Light
Green Telltale
LightWhat It Means
Cruise Control Engaged Indicator Light
This light will turn on when the cruise control has been engaged.
212 GETTING TO KNOW YOUR INSTRUMENT CLUSTER

Blue Telltale Indicator Light
High Beam Indicator Light
Blue Telltale
LightWhat It Means
High Beam Indicator Light
This indicator shows that the high beam headlights are on. Push the multifunction control
lever away from you to switch the headlights to high beam. Pull the lever toward you to
switch the headlights back to low beam.
5
GETTING TO KNOW YOUR INSTRUMENT CLUSTER 213

White Telltale Indicator Light
Electronic Speed Control ON Indicator Light
White Telltale
LightWhat It Means
Electronic Speed Control ON Indicator Light
This light will turn on when the electronic speed control is ON.
Cruise Control Cancelled Light
White Telltale
LightWhat It Means
Cruise Control Cancelled Light
This light will turn on when the cruise control has been cancelled by the driver. Refer to
“Electronic Speed Control” in “Understanding The Features Of Your Vehicle” for further in-
formation.
214 GETTING TO KNOW YOUR INSTRUMENT CLUSTER

ONBOARD DIAGNOSTIC SYSTEM (OBD II)
Your vehicle is equipped with a sophisticated onboard
diagnostic system called OBD II. This system monitors
the performance of the emissions, engine, and automatic
transmission control systems. When these systems are
operating properly, your vehicle will provide excellent
performance and fuel economy, as well as engine emis-
sions well within current government regulations.
If any of these systems require service, the OBD II system
will turn on the “Malfunction Indicator Light (MIL).” It
will also store diagnostic codes and other information to
assist your service technician in making repairs. Al-
though your vehicle will usually be drivable and not
need towing, see your authorized dealer for service as
soon as possible.
CAUTION!
•Prolonged driving with the MIL on could cause
further damage to the emission control system. It
could also affect fuel economy and driveability.
The vehicle must be serviced before any emissions
tests can be performed.
•If the MIL is flashing, while the engine is running,
severe catalytic converter damage and power loss
will soon occur. Immediate service is required.
Onboard Diagnostic System (OBD II)
Cybersecurity
Your vehicle is required to have an Onboard Diagnostic
system (OBD II) and a connection port to allow access to
information related to the performance of your emissions
controls. Authorized service technicians may need to
access this information to assist with the diagnosis and
service of your vehicle and emissions system.
5
GETTING TO KNOW YOUR INSTRUMENT CLUSTER 215

•Zone (4A)
– Title (Centered)
– Browsing Arrows (Left)
– Title Number (Right)
•Zone (4B)
– Title (Centered)
•Zone (4C)
– Title (Centered)
– Browsing Arrows (Left)
– Title Number (Right)
•Zone (5)
– Trip and Fuel Label (Left)
– Trip and Fuel Units (Left)
– Trip and Fuel Value (Right)
– Trip and Fuel Progress Bar (Centered)
– Text (Left)•Zone (6)
– Red Telltale Lights
•Zone (7)
– White Telltale Lights
•Zone (8)
– Odometer Digits (Left)
– Odometer Unit (Right)
– Cruise Control Speed Set (Center)
– Speed Buzzer (Right)
•Zone (9)
– Yellow Telltale Lights
218 GETTING TO KNOW YOUR INSTRUMENT CLUSTER

Speedometer
Push and release the UP or DOWN arrow button until
“Speedometer” is highlighted in the EVIC. Push the OK
button to change the speedometer scale from MPH
to km/h (km/h to MPH).
Vehicle Info
Push and release the UP or DOWN arrow button until
Vehicle Infois highlighted in the EVIC/DID. Push and
release the RIGHT arrow button and Coolant Temp will
be displayed. Push the RIGHT or LEFT arrow button to
scroll through the following information displays:
•Tire Pressure
View the information relating to the TPMS system (if
equipped).
•Coolant Temperature
View the engine coolant temperature.•Oil Temperature
View the engine oil temperature.
•Battery Voltage
View the voltage value (state of charge) of the battery.
•Service
View the service status message(s).
Driver Assist
This menu item allows you to change the settings (No-
tice LaneSenseandIntensity LaneSense) relating to the
LaneSense system (if equipped).
•Notice LaneSense
By selecting this function, you can select thereadiness
of LaneSense, choosing between the optionsNear,Me-
dium,orFar.
224 GETTING TO KNOW YOUR INSTRUMENT CLUSTER

Vehicles With Multi-Functional Display Reconfigu-
rable
The background color of the display varies according to
the priorities of the failure:
•Failed Messages with low priority
Displays in yellow
•Failed Messages with high priority
Displays in red
Screen Setup
This menu item allows you to change the position of the
information on the display.
Display Gears (Vehicles With Reconfigurable Multi-
Functional Display And Automatic Transmission)
By selecting this item, you can select the display mode,
the particulars relating to the automatic transmission,
and choose between the following options:•Single digit
The right side of the display will show the letter concern-
ing the automatic transmission shift lever (P,N,R or D)
position. After approximately two seconds, the letter will
be displayed in a central position.
•Full PNRD
(Default): The right side of the display the letters PNRD,
the position assumed by the shift lever will be high-
lighted in the display. During the operation in sequential
mode (AutoStick), in place of the letter D, the gear will
be will be displayed.
In The Upper-Left/Top Right
The information relating to the following can be dis-
played:
•External temperature
•Compass (If Equipped)
5
GETTING TO KNOW YOUR INSTRUMENT CLUSTER 227