navigation system JEEP RENEGADE 2016 1.G Owners Manual

Vehicles Equipped With Multifunctional Display
Reconfigurable:
Menu itemsDisplay(you can select
only the itemsSee PhoneandSee Navigation,Secu-
rity,andSafety & Assistance(onlyVolume Alertsis
selectable) are present.
All other entries are displayed and selected on the
display of the Uconnect system.
“Display”
By selecting theDisplay,you can access the following
settings:
•Language: allows you to select the language in which
to display the information/warnings.
•Phone Repetition:allows you to view, on the instru-
ment cluster display, the information relating to Phone
mode displayed on the display of the Uconnect sys-
tem.•NAV Turn By Turn:allows you to view, on the
instrument cluster display, information relating to the
navigation mode.
Units Of Measure
By selecting the itemUnits of measure,you can select
the unit of measure to use for displaying various magni-
tudes.
Possible options are:
•US
•Metric
•Custom
5
GETTING TO KNOW YOUR INSTRUMENT CLUSTER 229

button on the touchscreen. Press the “On” or “Off”
button on the touchscreen to turn the Touchscreen Beep
ON or OFF.
Units
•Units
When in this display, you may select to have the Elec-
tronic Vehicle Information System (EVIC) or Driver In-
formation Display (DID), odometer, and navigation sys-
tem (if equipped) changed between US and Metric units
of measure. Press “US,” “Metric” or “Custom.”
•Custom
When “Custom” is selected, you may select each unit of
measure independently displayed in the DID, and navi-
gation system. The following selectable units of measure
are listed below:
Distance— Select from: “MI” or “KM.”Fuel Consumption— Select from: “MPG” (US), “MPG”
(UK), L/100 km, or km/L.
Tire Pressure— Select from: “psi”, “kPa”, or “bar.”
Temperature— Select from: “°F” or “°C.”Voice
After pressing the “Voice” button on the touchscreen the
following settings will be available:
•Voice Response Length
When in this display, you may change the Voice Re-
sponse Length settings. To change the Voice Response
Length, press the “Voice Response Length” button on the
touchscreen and select from “Brief” or “Detailed.”
•Show Command List
When in this display, you may change the Show Com-
mand List settings. To change the Show Command List
626 MULTIMEDIA

5. You can interrupt the help message or system prompts
by pushing the VR or Phone button and saying a Voice
Command from current category.Basic Voice Commands
The basic Voice Commands below can be given at any
point while using your Uconnect system.
Push the VR button
. After the beep, say
•Cancelto stop a current voice session.
•Helpto hear a list of suggested Voice Commands.
•Repeatto listen to the system prompts again.
Uconnect Voice Command Buttons1 — Push To Initiate Or To Answer A Phone Call, Send Or Re-
ceive A Text
2 — Push To Begin Radio, Navigation, Or Media functions
3 — Push To End Call 648 MULTIMEDIA

Navigation (6.5AN)
The Uconnect navigation feature helps you save time and
become more productive when you know exactly how to
get to where you want to go.
1. To enter a destination, push the VR button
. After
the beep, say:
•For the 6.5AN Uconnect System, say:“Navigate to
800 Chrysler Drive Auburn Hills, Michigan.”
2. Then follow the system prompts.
TIP:To start a POI search, push the VR button
. After
the beep, say: “Find nearestcoffee shop.”Uconnect 6.5AN Navigation
656 MULTIMEDIA