vin JEEP WRANGLER 1995 Manual Online

Fig. 13 Oil Strainer And Check Valve Installation
Fig. 1 Removing/Installing Upper Body Plate And
Gaskets
Fig. 2 Check Ball And Strainer Location/
Identification
21 - 256 AW-4 TRANSMISSION OVERHAULJ

Fig. 4 Removing/Installing Throttle ValveFig. 6 Removing/Installing 3-4 Shift Valve
Fig. 5 Throttle Valve Adjusting Ring Location (If Equipped)
JAW-4 TRANSMISSION OVERHAUL 21 - 257

Fig. 8 Removing/Installing Converter Clutch Relay
Valve
Fig. 9 Relay Valve Components
21 - 258 AW-4 TRANSMISSION OVERHAULJ

Fig. 11 Removing/Installing Cut-Back Valve
Fig. 12 Removing/Installing 2-3 Shift Valve
Fig. 13 Removing/Installing Low Coast Modulator
Valve
JAW-4 TRANSMISSION OVERHAUL 21 - 259

Fig. 6 Oil Pump And Pickup Tube Removal
Fig. 7 Removing Oil Screen And Pickup Tube
Fig. 8 Pickup Tube O-Ring Location
Fig. 9 Mode Spring Removal
21 - 290 NP231 TRANSFER CASEJ

Fig. 11 Removing Mainshaft, Mode Fork And Shift
Rail
Fig. 12 Removing Mode Fork And Rail From Sleeve
Fig. 13 Hub Snap Ring And Spacer Removal
Fig. 14 Removing Sleeve From Hub
JNP231 TRANSFER CASE 21 - 291

Fig. 16 Drive Sprocket Removal/Installation
Fig. 17 Disengaging Range Fork
Fig. 18 Range Fork And Hub Removal/Installation
Fig. 19 Shift Sector Removal/Installation
Fig. 20 Removing/Installing Sector Shaft Bushing
And O-Ring
21 - 292 NP231 TRANSFER CASEJ

Fig. 22 Front Bearing Retainer Bolt Locations
Fig. 23 Removing Front Bearing Retainer
Fig. 24 Removing Input Gear Snap Ring
Fig. 25 Removing Input And Low Range Gear
Assembly
JNP231 TRANSFER CASE 21 - 293

Fig. 26 Removing Low Range Gear Snap Ring
Fig. 27 Input And Low Range Gear Components
Fig. 28 Low Range Annulus Gear Location
21 - 294 NP231 TRANSFER CASEJ

Fig. 30 Removing/Installing Front Output Shaft
Bearing Snap Ring
Fig. 31 Installing Front Output Shaft Front Bearing
In Case
Fig. 32 Front Output Shaft Rear Bearing Removal
Fig. 33 Front Output Shaft Rear Bearing Installation
JNP231 TRANSFER CASE 21 - 295