CD player JEEP WRANGLER 2004 TJ / 2.G Owners Manual

UNDERSTANDING YOUR INSTRUMENT PANEL
CONTENTS
mInstrument Panel And Interior Controls......114
mInstrument Cluster.....................115
mInstrument Cluster Description............116
mElectronic Digital Clock.................120
NClock Setting Procedure.................121
mRadio General Information...............121
NRadio Broadcast Signals.................121
NTwo Types Of Signals..................121
NElectrical Disturbances..................121
NAM Reception.......................121
NFM Reception........................121
mSales Code RADÐAM & FM Stereo Radio
With Graphic Equalizer, Cassette Tape Player
With CD Player
.......................122
NRadio Security Code...................122
NOperating Instructions - Radio Mode.......122
NPower Switch, Volume Control............123
NSeek Button (Radio Mode)...............123
NTuning.............................123
NBalance............................123
NFade..............................123
NTone Control........................123
NAM/FM-Tape/CD/CD-C................123
4

NTo Set The Radio Push-Button Memory......123
NOperating Instructions - RDS Mode........124
NTime Button.........................124
NTA (Traffic Announcement) Button.........125
NPTY (Program Type) Button..............125
NAF LOC (Alternative Frequencies And Local
Frequencies) Button....................126
NOperating Instructions - Tape Mode........126
NChanging Tape Direction................127
NSeek Button.........................127
NFast Forward (FF).....................127
NRewind (RW)........................127
NTape EjectD.........................127
NMetal Tape Selection (70s)..............127
NPinch Roller Release...................128
NDolby Noise Reduction.................128NOperation Instructions Ð CD Player........128
NInserting The Compact Disc..............128
NSeek Button.........................128
NEJT CD (Eject) Button..................129
NFF/Tune/RW Button...................129
NProgram Button 4 (Random Play)..........129
NCD/CDÐC/Tape Button................129
NTime Button.........................129
mSales Code RBBÐAM/FM Stereo Radio
With Cassette Tape Player And CD Changer
Capability
...........................130
NOperating Instructions..................130
NPower Button........................130
NElectronic Volume Control...............130
NSeek..............................130
NTune ..............................131
110 UNDERSTANDING YOUR INSTRUMENT PANEL

NTo Set The Push-Button Memory..........131
NBalance............................131
NFade..............................131
NBass And Treble Tone Control............131
NAM/FM Selection.....................132
NMode Button........................132
NCassette Player Features................132
NCD Changer Control Capability Ð
If Equipped.........................133
NRadio Display Messages................134
mSales Code RBKÐAM/ FM Stereo Radio
With CD Player And CD Changer Controls
...135
NRadio Operation......................135
NCD Player Operation...................137
NCD Changer Control Capability Ð
If Equipped.........................138
NRadio Display Messages................140
mSales Code RBT/RBYÐAM Stereo & FM Stereo
Radio With Graphic Equalizer, Cassette Tape
Player And CD Player
..................140
NOperating Instructions - Radio Mode.......140
NPower Switch, Volume Control............140
NSeek (Radio Mode)....................141
NTune ..............................141
NBalance............................141
NFade..............................141
NTone Control........................141
NAM/FM Selection.....................141
NTo Set The Radio Push-Button Memory......141
NTime ..............................142
NOperating Instructions - Tape Mode........142
N(¹D)...............................142
NTape ..............................142
UNDERSTANDING YOUR INSTRUMENT PANEL 111
4

NSeek..............................142
NFast Forward (FF).....................143
NRewind (RW)........................143
NEJTTape ...........................143
NMetal Tape Selection (70s)..............143
NPinch Roller Release...................143
NDolby Noise Reduction.................143
NOperation Instructions Ð CD Player........144
NInserting The Compact Disc..............144
NSeek..............................144
NEJTCD ............................144
NFF/Tune/RW........................144
NRND (Random Play)...................144
NCD/CD-C..........................145
NTime ..............................145mSatellite Radio Ð If Equipped.............145
NSystem Activation.....................145
NElectronic Serial Number/Sirius Identification
Number (ENS/SID)....................145
NSelecting Satellite Mode In RBB And
RBK Radios.........................146
NSelecting Satellite Mode In RBP, RBU,
RAZ, And RBQ Radios.................146
NSelecting a Channel....................146
NStoring And Selecting Pre-Set Channels......147
NUsing The PTY (Program Type) Button
(If Equipped)........................147
NPTY Button9Scan9.....................147
NPTY Button9Seek9.....................147
NSatellite Antenna......................147
NReception Quality.....................147
112 UNDERSTANDING YOUR INSTRUMENT PANEL

mCassette Tape And Player Maintenance......148
mCD/DVD Disc Maintenance..............149
mRadio Operation And Cellular Phones.......149
mClimate Controls......................149
NHeater Only Ð If Equipped..............150NAir Conditioning Ð If Equipped..........151
NOperating Tips.......................154
mRear Window Features Ð Hard Top Only....154
NRear Window Defogger.................154
NRear Window Wiper/Washer.............155
UNDERSTANDING YOUR INSTRUMENT PANEL 113
4

SALES CODE RADÐAM & FM STEREO RADIO
WITH GRAPHIC EQUALIZER, CASSETTE TAPE
PLAYER WITH CD PLAYER
Radio Security Code
This radio is equipped with an anti-theft feature which
requires that a four digit code number be entered when-
ever the power supply is interrupted (such as a discon-
nected battery). The four digit code can be found on the
last page of this manual. Please remove this page from
the manual and store it in a safe place outside of the
vehicle.To enter the code, turn the key to the ON or ACC position
and press the ON/VOL control. The word CODE will
appear on the display. Enter your four digit code by
pressing the appropriate preset buttons in sequence. Your
radio is now ready for basic operation.
If an invalid code is entered into the radio, the radio will
allow two more attempts. After a third attempt of enter-
ing an invalid code, the radio will go into a lockup mode.
This is to prevent continuous attempts at entering the
wrong code until the right code is found.
Once a radio is in this lockup mode, it must be in a state
where battery is applied for approximately 30 minutes.
During this time, if the radio is on, the display will show
ªWAITº. After approximately 30 minutes, (radio on)
radio will display ªCODEº thereby again querying the
operator for the 4 digit anti-theft code.
Operating Instructions - Radio Mode
NOTE:
Power to operate the radio is supplied through
the ignition switch. It must be in the ON or ACC position
to operate the radio.
122 UNDERSTANDING YOUR INSTRUMENT PANEL

²Oldies
²Other M
²Phone In
²Pop M
²Religion
²Rock M
²Science
²Social
²Sport
²Travel
²Varied
²Weather
By pressing the SEEK button when the PTY icon is
displayed, the radio will be tuned to the next frequency
station with the same selected PTY name. The PTY
function only operates when in the FM mode.If a preset button is activated while in the PTY (Program
Type) mode, the PTY mode will be exited and the radio
will tune to the preset station.
AF LOC (Alternative Frequencies and Local
Frequencies) Button
Pressing the AF LOC button will toggle the radio display
as follows: LOC ON »» AF OFF »» LOC OFF. The radio
display will indicate when the LOC and AF are activated.
AF will automatically tune to another frequency of the
same national program when the signal quality of the
currently tuned frequency becomes poor.
LOC limits AF to only tune to another station within the
same region code to ensure the program remains local.
Operating Instructions - Tape Mode
Insert the cassette with the exposed tape side toward the
right and the mechanical action of the player will gently
pull the cassette into the play position.
126 UNDERSTANDING YOUR INSTRUMENT PANEL

NOTE:When subjected to extremely cold temperatures,
the tape mechanism may require a few minutes to warm
up for proper operation. Sometimes poor playback may
be experienced due to a defective cassette tape. Clean and
demagnetize the tape heads at least twice a year.
Changing Tape Direction
Press the top of the PTY button to change tape play
direction. The display will confirm the selected tape play
direction. The time is always displayed.
Seek Button
Press the SEEK button up for the next selection on the
tape and down to return to the beginning of the current
selection.
Press the SEEK button up or down to move the track
number to skip forward or backward 1 to 7 selections.
Press the SEEK button once to move 1 selection, twice to
move 2 selections, etc. the display will show the total
number of times the SEEK button was pushed. The SEEK
function will be cancelled by pressing either the FF/RW
or FM/MW/LW button.
Fast Forward (FF)
Press the FF button up momentarily to advance the tape
in the direction that it is playing. The tape will advance
until the button is pressed again or the end of the tape is
reached. At the end of the tape, the tape will play in the
opposite direction.
Rewind (RW)
Press the RW button down momentarily to reverse the
tape direction. The tape will reverse until the button is
pressed again or until the end of the tape is reached. At
the end of the tape, the tape will play in the opposite
direction.
Tape EjectD
Press the Eject Tape button and the cassette will disen-
gage and eject from the radio.
Metal Tape Selection (70s)
If a standard 70  (metal) tape is inserted into the player,
the player will automatically select the correct equaliza-
tion.
UNDERSTANDING YOUR INSTRUMENT PANEL 127
4

Pinch Roller Release
If ignition power or the radio ON/OFF switch are turned
off, the pinch roller will automatically retract to protect
the tape from any damage. When power is restored to the
tape player, the pinch roller will automatically reengage
and the tape will resume play.
Dolby Noise Reduction
The Dolby Noise Reduction System* is on when-
ever the tape player is on, but may be switched
on/off.
To turn the Dolby Noise reduction System on/off: Press
the Dolby NR button (button 2) after you insert the tape.
The NR light in the display will go off when the Dolby
System is off.
* ºDolbyº noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation. Dolby
and the double-D symbol are trademarks of Dolby Labo-
ratories Licensing Corporation.
Operation Instructions Ð CD Player
NOTE:
The ignition switch must be in the ON or ACC
position and the volume control ON before the CD player
will operate.
Inserting The Compact Disc
You may either insert or eject a disc with the radio OFF.
If you insert a disc with the ignition ON and the radio
OFF, the time of day will be displayed.
If the volume control is ON, the unit will switch from
radio to CD mode and begin to play when you insert the
disc. The display will show the track number and index
time in minutes and seconds. Play will begin at the start
of track 1.
Seek Button
Press the top of the SEEK button for the next selection on
the CD. Press the bottom of the button to return to the
beginning of the current selection, or return to the
beginning of the previous selection if the CD is within the
first 10 seconds of the current selection.
128 UNDERSTANDING YOUR INSTRUMENT PANEL

EJT CD (Eject) Button
Press the EJT CD button and the disc will unload and
move to the entrance for easy removal. The unit will
switch to the radio mode. If you do not remove the disc
within 15 seconds, it will be reloaded, and the display
will remain unchanged in whatever mode it is in.
FF/TUNE/RW Button
Press FF (Fast Forward) and the CD player will begin to
fast forward until FF is released. The RW ( Reverse)
button works in a similar manner.
Program Button 4 (Random Play)
Press this button while the CD is playing to activate
Random Play. This feature plays the selections on the
compact disc in random order to provide an interesting
change of pace.Press the SEEK button to move to the next randomly
selected track.
Press button 4 a second time to stop Random Play.
CD/CDÐC/Tape Button
Press this button to select between CD player, Remote CD
changer, and Tape player.
Time Button
Press this button to change the display from elapsed CD
playing time to time of day.
UNDERSTANDING YOUR INSTRUMENT PANEL 129
4