sat nav JEEP WRANGLER 2015 JK / 3.G User Guide

Taking A Detour
To take a detour you must be navigating a route.
• Press the “back arrow” icon button on the touchscreen multiple times to return to
the Main Navigation menu.
• Press the “Detour” button on the touchscreen.
NOTE:
If the route you are currently taking is the only reasonable option, the device might
not calculate a detour.
Acquiring Satellites
The GPS Satellite strength bars indicate the strength of your satellite reception.
• Acquiring satellite signals can take a few minutes. When at least one of the bars
is green, your device has acquired satellite signals.
•You may experience delays receiving satellite signals when in areas with an ob-
structed view to the sky, such as garages, tunnels, or large cities with tall buildings.
ELECTRONICS
68

Navigation
• Your navigation system receives GPS
signals from up to 16 satellites to dis-
play the position of your vehicle. Map
and database information is supplied
through a hard disk drive.
• Push the NAV button on the faceplate
to access the Navigation system and
the NAV – Main Menu.
Changing The Navigation Guidance Prompt Volume
1. From the Navigation Map screen, push the MENU button on the faceplate then
press the “NAV Settings” button on the touchscreen. Next select "Guidance
Prompts."
2. Select and adjust the navigation guidance prompt volume using the left and right
arrows.
3.Press the “SAMPLE VOL” button on
the touchscreen to listen to the current
volume setting.
4.Once satisfied with the volume, press
the “SAVE” button on the touchscreen
to save the settings. Press the “CAN-
CEL” button on the touchscreen to exit
the menu without saving the settings.
NOTE:
For your own safety and the safety of others, it is not possible to use certain features
while the vehicle is in motion.
Navigating A Route
Navigation Prompt Volume
ELECTRONICS
77