wheel bolt torque JEEP XJ 1995 Service And Manual PDF

SPARE TIRE/WHEEL HOLDDOWN AND FLOOR
BRACKETSÐXJ
REMOVAL
(1) Remove the spare tire and wheel (Fig. 3).
(2) Remove the floor bracket retaining screws.
(3) Remove the holddown bolt from the holddown
bracket (Fig. 4 and 5).
(4) Remove the trim panel from the quarter panel.
If necessary, refer to the removal procedure.
(5) Remove the retaining screws and the holddown
bracket from the quarter panel.
INSTALLATION
(1) Position the holddown bracket on the quarter
panel and install the retaining screws. Tighten the
screws to 8 Nzm (71 in-lbs) torque.
(2) Install the quarter trim panel. If necessary, re-
fer to the installation procedure.
(3) Install the holddown bolt in the holddown
bracket.
The length of the holddown bolt is different
for P195 and P225 tires.
(4) Position the floor bracket on the trim panel and
install the retaining screws. Tighten the screws to 1
Nzm (11 in-lbs) torque.
(5) Install the spare tire and wheel.
Fig. 3 Interior Spare Tire/Wheel Holddown and Floor Brackets
Fig. 2 Jack Retainer BracketFig. 4 Spare Tire/Wheel Holddown Bolt and Bracket
(LHD)
23 - 98 INTERIOR COMPONENTSÐXJJ

BODY SIDE STEP MOLDINGÐYJ
REMOVAL/INSTALLATION
The body side moldings are attached to the step
supports and to the body side panels (Fig. 20).
(1) It is necessary to loosen the fender flare retain-
ing screws (Fig. 18 and 19) before removing the lower
body and step moldings.
(2) Remove the retaining bolts and the lower body
molding from the support bracket and cowl side
panel (Fig. 20).
(3) Remove the retaining bolts/screws, the applique
and the side step molding from the cowl side panel/
rocker panel (Fig. 20).
(4) If necessary, remove the retaining bolt/screws
and the support bracket and side step support plat-
form from the cowl side panel/rocker panel (Fig. 21).
INSTALLATION
(1) If removed, install the support bracket and side
step support platform on the cowl side panel/rocker
panel. Install and tighten the support bracket retain-
ing bolt to 11 Nzm (96 in-lbs) torque. Install and
tighten the support platform retaining screws to 41
Nzm (30 ft-lbs) torque.
(2) Install the side step molding and applique on
the cowl side panel/rocker panel. Install and tighten
the molding retaining bolts to 11 Nzm (96 in-lbs)
torque. Install and tighten the applique retaining
screws to 41 Nzm (30 ft-lbs) torque.(3) Install the lower body molding on the support
bracket and cowl side panel with the retaining bolts.
Tighten the molding retaining bolts to 11 Nzm (96 in-
lbs) torque.
(4) Tighten the fender flare retaining screws to 11
Nzm (96 in-lbs) torque.
WHEELHOUSE SPLASH LINERSÐYJ
REMOVAL
(1) Remove the liner attaching screws (Fig. 22).
(2) Remove the rivets that attach the liner to the
wheelhouse (Fig. 22).
(3) Remove the rivets that attach the liner rear
splash shield to the rear crossmember.
(4) Remove the liner from the wheelhouse.
(5) Remove the rivets that attach the rear splash
shield to the wheelhouse liner.
INSTALLATION
(1) Attach the rear splash shield to the wheelhouse
liner with rivets.
(2) Position the liner in the wheelhouse.
(3) Install the screws and rivets to attach the liner
to the wheelhouse.
(4) Install the rivets to attach the rear splash
shield to the crossmember.
FENDER SPLASH APRONSÐYJ
REMOVAL
(1) Remove the splash apron attaching screws (Fig.
22).
(2) Remove the aprons from the fender well (Fig.
22).
INSTALLATION
(1) Position the aprons in the fender well (Fig. 22).
(2) Install the screws to attach the splash aprons
to the fender well.
Fig. 20 Side Step Support Platform and Molding/
Applique
Fig. 21 Side Step Support Platform and Support
Bracket
JEXTERIOR COMPONENTSÐYJ 23 - 115

channel. Close the rear window curtain zippers and
attach the side snap-on retainers.
(16) Attach all the top cover snap-on retainers to
the upper side retainers located above both doors. As
necessary, slide the mating half of the snap-on re-
tainers so that they will align with the snap-on re-
tainers on the top cover. Tuck the edge of the top
cover inside the side retainer.
(17) Install the door windows by inserting the re-
tainers into the door grommets. Attach the snap-on
retainers located along the bottom edge of the win-
dow to the door retainer.
SPORT BARÐYJ
REMOVAL
(1) Disconnect sound bar. Refer to Group 8F, Audio
Systems for removal and installation procedures.
(2) Remove the screws that attach the sport bar
base plates to the floor and wheelhouse panels (Fig.
1).
(3) Remove the retaining screws and bolts, and re-
move the side bars from the windshield frame and
the sport bar (Fig. 1 and 2).
(4) Carefully lift the sport bar upward and remove
it from the vehicle.
(5) If necessary, remove the pads and covers from
the sport bar.
INSTALLATION
(1) Clean the base plate contact surface areas on
the floor and wheelhouse panels.
(2) Apply epoxy chromate primer to the attaching
screw hole edges for protection against corrosion.
(3) Position the sport bar base plates on the floor
and wheelhouse panels with the screw holes aligned.
To prevent water seepage, apply 3M Drip-
Chek Sealant (or an equivalent product) to the
underside of all the screw heads before instal-
lation.(4) Apply sealant to the underside of each base
plate attaching screw head. Install and tighten the
screws to 42 Nzm (31 ft. lbs.) torque.
(5) Position the side bars at the windshield frame.
Tighten the screws to 32 Nzm (24 ft. lbs.) torque.and
at the sport bar. Install screws and bolts in the wind-
shield frame and the sport bar. Tighten the screws to
32 Nzm (53 ft. lbs.) torque.
(6) Position the side bars at the sport bar. Install
the bolts in the sport bar. Tighten the screws to 71
Nzm (53 ft. lbs.) torque.
(7) Install sound bar.
Fig. 20 Engaging Spreader Bar Lock
Fig. 1 Sport Bar
Fig. 2 Sport Bar-To-Side Bar Bolt
23 - 132 EXTERIOR COMPONENTSÐYJJ

BELT TENSIONERÐXJ MODELS WITH
RIGHT HAND DRIVE, AUTOMATIC........7-42
BELT TENSIONÐEXCEPT RIGHT HAND
DRIVE (RHD).........................7-38
BELT TENSIONÐEXCEPT RIGHT HAND
DRIVE (RHD) MODELS.................7-45
BELT TENSIONÐRIGHT HAND DRIVE
(RHD)..............................7-38
BELT/BUCKLEÐXJ, FRONT SHOULDER . . . 23-90
BELT/BUCKLEÐXJ, REAR SHOULDER/
LAP ...............................23-91
BELTLINE SEALÐYJ.................23-142
BELTS, ENGINE ACCESSORY DRIVE.......7-38
BELTSÐYJ, FRONT SHOULDER........23-154
BELTSÐYJ, REAR SHOULDER.........23-154
BENCH BLEEDING, MASTER CYLINDER....5-21
BENCH, GEAR ADJUSTMENTS ON.......19-44
BENCH SEATÐYJ, REAR..............23-153
BEZELÐXJ, INSTRUMENT CLUSTER.....23-80
BEZELÐYJ, INSTRUMENT CLUSTER....23-151
BIN REMOVE/INSTALL, SUNGLASSES
STORAGE...........................8C-7
BLADE REMOVE/INSTALL, WINDSHIELD
WIPER.............................8K-17
BLEEDING, MASTER CYLINDER BENCH....5-21
BLEEDING RECOMMENDATIONS, BRAKE . . . 5-10
BLEEDING (WITH ABS BRAKES), BRAKE . . . 5-11
BLEEDING (WITH STANDARD BRAKES),
BRAKE..............................5-11
BLEEDINGÐBRAKELINES AND HOSES,
BRAKE FLUIDÐBRAKE.................5-10
BLOCK, CYLINDER................9-49,9-91
BLOCK HEATER, ENGINE................7-44
BLOCKSÐTWO-DOOR VEHICLES, FRONT
DOOR SPACER......................23-53
BLOWER MOTOR; AIR CONDITIONING/
HEATER (XJ)......................8W-42-1
BLOWER MOTOR; AIR CONDITIONING/
HEATER (XJ-RHD)..................8W-42-1
BLOWER MOTOR; HEATING AND AIR
CONDITIONING......................24-17
BLOWER MOTOR, A/C.................24-35
BLOWER MOTOR, A/C-HEATER; AIR
CONDITIONING/HEATER (YJ).........8W-42-2
BLOWER MOTOR (HEATING)...........24-33
BLOWER MOTOR RESISTORS
REPLACEMENT......................24-31
BLOWER MOTOR SWITCH.............24-16
BLOWER MOTOR/AIR DOOR MOTOR
SWITCH REPLACEMENT...............24-32
BLOWER MOTOR/FAN REPLACEMENT....24-24
BODY ASSEMBLY AND ADJUSTMENT,
VALVE ............................21-153
BODY CHECK BALL DIMENSIONS, AW-4
VALVE ............................21-341
BODY CODE LETTERS, JEEP..............5-2
BODY LUBRICANT SPECIFICATIONS.......0-33
BODY OVERHAUL, TRANSMISSION
VALVE ............................21-250
BODY REMOVAL, TRANSMISSION VALVE . 21-186
BODY REMOVAL, VALVE..............21-104
BODY SERVICE INFORMATION, GENERAL . . 23-1
BODY SERVICE, VALVE...............21-104
BODY SIDE MOLDING/CLADDINGÐXJ....23-20
BODY SIDE STEP MOLDINGÐYJ.......23-115
BODY SOLENOIDS, TRANSMISSION
VALVE ............................21-184
BODY STRIPES/DECALSÐXJ...........23-21
BODY STRIPES/DECALSÐYJ..........23-116
BODY, THROTTLE...............14-33,14-64
BOLT IDENTIFICATION..............Intro.-14
BOLT STRENGTH..................Intro.-15
BOOSTER CHECK VALVE TEST, POWER.....5-9
BOOSTER INSTALLATION (XJ WITH
ABS), POWER BRAKE..................5-27
BOOSTER INSTALLATION (XJ WITHOUT
ABS), POWER BRAKE..................5-30
BOOSTER INSTALLATION (YJ), POWER
BRAKE..............................5-30
BOOSTER, MASTER CYLINDER/POWER
BRAKE
..............................5-34
BOOSTER OPERATION, POWER BRAKE
....5-23
BOOSTER REMOVAL (XJ WITH ABS),
POWER BRAKE
.......................5-24
BOOSTER REMOVAL (XJ WITHOUT ABS),
POWER BRAKE
.......................5-29
BOOSTER REMOVAL (YJ), POWER
BRAKE
..............................5-30BOOSTER TEST, MASTER CYLINDER/
POWER..............................5-8
BOOSTER VACUUM TEST, POWER.........5-9
BOOSTERÐBRAKE PEDALÐ
BRAKELIGHT SWITCH, POWER BRAKE....5-22
BORES, HONING CYLINDER..............9-2
BOX LAMP, GLOVE; INTERIOR LIGHTING
(XJ).............................8W-44-1
BOX LAMP, GLOVE; INTERIOR LIGHTING
(XJ-RHD).........................8W-44-1
BOXÐYJ, GLOVE...................23-152
BRACKET REPLACEMENTÐXJ, INTERIOR
REARVIEW MIRROR SUPPORT..........23-68
BRACKETÐYJ, REARVIEW MIRROR
RETAINING........................23-144
BRACKETSÐXJ, SPARE TIRE/WHEEL
HOLDDOWN AND FLOOR..............23-98
BRAKE ADJUSTMENT, DRUM............5-57
BRAKE BLEEDING RECOMMENDATIONS....5-10
BRAKE BLEEDING (WITH ABS BRAKES)....5-11
BRAKE BLEEDING (WITH STANDARD
BRAKES)............................5-11
BRAKE BOOSTER INSTALLATION (XJ
WITH ABS), POWER...................5-27
BRAKE BOOSTER INSTALLATION (XJ
WITHOUT ABS), POWER................5-30
BRAKE BOOSTER INSTALLATION (YJ),
POWER.............................5-30
BRAKE BOOSTER, MASTER CYLINDER/
POWER.............................5-34
BRAKE BOOSTER OPERATION, POWER....5-23
BRAKE BOOSTER REMOVAL (XJ WITH
ABS), POWER........................5-24
BRAKE BOOSTER REMOVAL (XJ
WITHOUT ABS), POWER................5-29
BRAKE BOOSTER REMOVAL (YJ),
POWER.............................5-30
BRAKE BOOSTERÐBRAKE PEDALÐ
BRAKELIGHT SWITCH, POWER...........5-22
BRAKE CABLE TENSIONER ADJUSTMENT
(XJ/YJ), PARKING.....................5-69
BRAKE CABLE TENSIONER
REPLACEMENT (XJ), PARKING...........5-66
BRAKE CHECK, PRELIMINARY............5-4
BRAKE COMPONENTS...................5-1
BRAKE DIAGNOSIS, ABS.................5-3
BRAKE DIAGNOSIS, SERVICE.............5-4
BRAKE DRUM REFINISHING.............5-58
BRAKE FLUID CONTAMINATION.......5-10,5-7
BRAKE FLUID LEVEL...................5-10
BRAKE FLUID, RECOMMENDED..........5-10
BRAKE FLUID/LUBRICANTS/CLEANING
SOLVENTS............................5-2
BRAKE FLUIDÐBRAKE BLEEDINGÐ
BRAKELINES AND HOSES...............5-10
BRAKE FRONT CABLE REPLACEMENT
(YJ), PARKING........................5-67
BRAKE HANDLE COVERÐXJ, PARKING . . . 23-94
BRAKE LEVER INSTALLATION (XJ WITH
FULL CONSOLE), PARKING..............5-64
BRAKE LEVER INSTALLATION (XJ WITH
MINI CONSOLE), PARKING..............5-63
BRAKE LEVER INSTALLATION (XJ
WITHOUT CONSOLE), PARKING..........5-65
BRAKE LEVER REMOVAL (XJ WITH FULL
CONSOLE), PARKING..................5-63
BRAKE LEVER REMOVAL (XJ WITH MINI
CONSOLE), PARKING..................5-62
BRAKE LEVER REMOVAL (XJ WITHOUT
CONSOLE), PARKING
..................5-64
BRAKE MALFUNCTIONS, DIAGNOSING
PARKING
.............................5-8
BRAKE NOISE
.........................5-7
BRAKE OPERATION, PARKING
...........5-60
BRAKE OVERHAUL, SECOND
..........21-241
BRAKE PACK REQUIREMENTS, AW-4
CLUTCH
...........................21-341
BRAKE PEDAL BUSHINGS, CLUTCH
.......0-22
BRAKE PEDAL INSTALLATION
............5-31
BRAKE PEDAL INSTALLATION (YJ),
PARKING
............................5-66
BRAKE PEDAL REMOVAL
...............5-31
BRAKE PEDAL REMOVAL (YJ), PARKING
. . . 5-66
BRAKE PEDAL TRAVEL SENSOR;
ANTI-LOCK BRAKES (YJ)
............8W-32-1
BRAKE PISTON AND TRANSMISSION
CASE OVERHAUL, FIRST-REVERSE
......21-247BRAKE REAR CABLE REPLACEMENT
(XJ), PARKING........................5-67
BRAKE REAR CABLE REPLACEMENT
(YJ), PARKING........................5-68
BRAKE ROTOR REFINISHING, DISC.......5-53
BRAKE ROTOR RUNOUT, DISC...........5-52
BRAKE ROTOR THICKNESS, DISC........5-52
BRAKE SAFETY PRECAUTIONS............5-2
BRAKE SWITCH......................14-59
BRAKE SWITCH INPUT; ANTI-LOCK
BRAKES (XJ)......................8W-32-2
BRAKE SWITCH INPUT; ANTI-LOCK
BRAKES (XJ-RHD).................8W-32-2
BRAKE SWITCH INPUT; ANTI-LOCK
BRAKES (YJ)......................8W-32-2
BRAKE SWITCH INPUT; FUEL/IGNITION
(XJ).............................8W-30-5
BRAKE SWITCH INPUT; FUEL/IGNITION
(YJ).............................8W-30-5
BRAKE SWITCH INPUT; FUEL/IGNITION
(XJ-RHD).........................8W-30-5
BRAKE SWITCH, PARKING..............5-68
BRAKE SWITCHÐPCM INPUT..........14-22
BRAKE SYSTEM, POWER...............0-30
BRAKE TORQUE SPECIFICATIONS.........5-70
BRAKE WARNING LAMP; INSTRUMENT
CLUSTER (XJ).....................8W-40-2
BRAKE WARNING LAMP; INSTRUMENT
CLUSTER (XJ-RHD)................8W-40-2
BRAKE WARNING LAMP; INSTRUMENT
CLUSTER (YJ)......................8W-40-2
BRAKE WARNING LIGHTS................5-1
BRAKELIGHT SWITCH ADJUSTMENT......5-32
BRAKELIGHT SWITCH INSTALLATION......5-32
BRAKELIGHT SWITCH REMOVAL.........5-32
BRAKELINE CHARTS...................5-12
BRAKELINES AND HOSES...............5-12
BRAKELINING, CONTAMINATED...........5-7
BRAKELINING MATERIAL................5-1
BRAKES (ABS), ANTILOCK...............5-1
BRAKES, DISC........................5-45
BRAKES DO NOT HOLD AFTER DRIVING
THROUGH DEEP WATER PUDDLES........5-7
BRAKES, DRUM......................5-55
BRAKES, PARKING....................5-60
BRAKESHOE INSTALLATION, DISC........5-47
BRAKESHOE INSTALLATION, DRUM.......5-55
BRAKESHOE REMOVAL, DISC............5-46
BRAKESHOE REMOVAL, DRUM...........5-55
BRAKING MODE, ABS OPERATION IN
ANTILOCK...........................5-36
BRAKING MODE, ABS OPERATION IN
NORMAL............................5-35
BREAK-IN, ENGINE....................0-15
BRUSH GUARDÐXJ...................23-3
BUCKET SEAT CUSHION AND COVERÐ
XJ ................................23-81
BUCKET SEAT PLATFORMÐXJ..........23-82
BUCKET SEATBACK COVER AND
FRAMEÐXJ.........................23-81
BUCKET SEATSÐXJ, FRONT............23-81
BUCKET SEATSÐYJ.................23-153
BULB APPLICATIONÐXJ VEHICLES......8L-18
BULB APPLICATIONÐYJ VEHICLES......8L-32
BULB REMOVE/INSTALL, READING/
COURTESY LAMP.....................8C-8
BULB REPLACEMENTÐXJ, BACK-UP/
REAR TURN SIGNAL/TAIL LAMP.........8L-12
BULB REPLACEMENTÐXJ, FRONT
PARK/TURN SIGNAL LAMP..............8L-9
BULB REPLACEMENTÐXJ, HEADLAMP....8L-7
BULB REPLACEMENTÐXJ, SIDE
MARKER LAMP......................8L-10
BULB REPLACEMENTÐXJ, UNDERHOOD
LAMP..............................8L-13
BULB REPLACEMENTÐYJ, BACK-UP/
REAR TURN SIGNAL/TAIL LAMP.........8L-28
BULB REPLACEMENTÐYJ, FRONT
PARK/TURN SIGNAL LAMP.............8L-25
BULB REPLACEMENTÐYJ, HEADLAMP . . . 8L-23
BULB REPLACEMENTÐYJ, SIDE
MARKER LAMP
......................8L-25
BULB REPLACEMENTÐYJ, UNDERHOOD
LAMP
..............................8L-29
BULB REPLACEMENTÐYJ VEHICLES,
HARDTOP DOME/CARGO LAMP
.........8L-31
BUMPER, FRONT
.................13-16,13-5
BUMPER, REAR
..................13-16,13-8
JINDEX 3
Description Group-Page Description Group-Page Description Group-Page

SPLICE INDEX; SPLICE INFORMATION
(YJ).............................8W-70-1
SPLICE LOCATIONS; SPLICE LOCATIONS
(XJ).............................8W-95-1
SPLICE LOCATIONS; SPLICE LOCATIONS
(YJ).............................8W-95-1
SPLICE LOCATIONS; WIRING DIAGRAMS
(XJ)...............................8W-1
SPLICE LOCATIONS; WIRING DIAGRAMS
(XJ-RHD)...........................8W-1
SPLICE LOCATIONS; WIRING DIAGRAMS
(YJ)...............................8W-1
SPORT BARÐYJ....................23-132
SPRING AND SHOCK ABSORBER
DIAGNOSIS........................3-3,3-6
SPRING AND SHOCK DIAGNOSIS; FRONT
SUSPENSION AND AXLE............2-13,2-15
SPRING AND SHOCK DIAGNOSIS; REAR
SUSPENSION AND AXLES.............3-3,3-6
SPRING, COIL........................2-14
SPRING EYE BUSHING REPLACEMENT,
LEAF; FRONT SUSPENSION AND AXLE.....2-17
SPRING EYE BUSHING REPLACEMENT,
LEAF; REAR SUSPENSION AND AXLES . . 3-5,3-7
SPRING IDENTIFICATION, AW-4 VALVE . . . 21-343
SPRING, LEAF; FRONT SUSPENSION
AND AXLE...........................2-16
SPRING, LEAF; REAR SUSPENSION AND
AXLES............................3-4,3-7
SPRING REPLACEMENT, VALVE STEM
SEAL...............................9-65
SPRINGS, ACCUMULATOR PISTONS....21-189
SPRINGS AND OIL SEALS, VALVE........9-23
SPRINGS, VALVES AND VALVE.......9-27,9-69
SPROCKETS, TIMING CHAIN.........9-31,9-73
STABILIZER BAR; FRONT SUSPENSION
AND AXLE.......................2-11,2-15
STABILIZER BAR; REAR SUSPENSION
AND AXLES...........................3-5
STALL TEST, CONVERTER..............21-74
STALL TEST, TORQUE CONVERTER.....21-178
STANDARD SERVICE PROCEDURES........9-1
STANDARD WIPERS................8W-53-1
STARTER AND SOLENOID TESTING
SPECIFICATIONS, 2.5L................8A-23
STARTER AND SOLENOID TESTING
SPECIFICATIONS, 4.0L................8A-23
STARTER AND STARTER RELAY..........8B-4
STARTER MOTOR RELAY TEST..........14-51
STARTER NOISE DIAGNOSIS...........8A-16
STARTER NOISE DIAGNOSIS, 2.5L.......8A-16
STARTER RELAY CONNECTIONS.........8A-15
STARTER RELAY REMOVE/INSTALL.......8B-6
STARTER RELAY, STARTER..............8B-4
STARTER REMOVE/INSTALLÐ2.5L........8B-4
STARTER REMOVE/INSTALLÐ4.0L........8B-5
STARTER SPECIFICATIONS..............8B-8
STARTING PROCEDURE, JUMP............0-9
STARTING SYSTEM; BATTERY/
STARTING/CHARGING SYSTEMS
DIAGNOSTICS.......................8A-11
STARTING SYSTEM; STARTING SYSTEM
(XJ).............................8W-21-1
STARTING SYSTEM; STARTING SYSTEM
(XJ-RHD).........................8W-21-1
STARTING SYSTEM; STARTING SYSTEM
(YJ)
.............................8W-21-1
STARTING SYSTEM COLD CRANKING
SPECIFICATIONS, 2.5L
................8A-23
STARTING SYSTEM COLD CRANKING
SPECIFICATIONS, 4.0L
................8A-23
STARTING SYSTEM DIAGNOSIS
.........8A-12
STARTING SYSTEM SPECIFICATIONS
.....8A-23
STARTING, TOWING AND HOISTING,
JUMP
................................0-9
STATEMENTÐGAS ENGINES, FUEL
USAGE
..............................0-19
STATIONARY GLASS
.................23-144
STATIONARY GLASS WATER LEAK
DETECTION AND REPAIRÐXJ
..........23-76
STATIONARY GLASS WATER LEAK
DETECTION AND REPAIRÐYJ
.........23-150
STATIONARY WINDOW GLASS
..........23-66
STATIONARY WINDOW GLASSÐXJ,
REAR DOOR
........................23-46
STATOR CLUTCH INSPECTION, TORQUE
CONVERTER
.......................21-199STEERING COLUMN GENERAL
SERVICEÐXJ.......................19-47
STEERING COLUMN, NON-TILT..........19-60
STEERING COLUMN, TILT..............19-66
STEERING COLUMNÐXJ..............19-78
STEERING COLUMNÐYJ.........19-58,19-78
STEERING DAMPER.............19-17,19-20
STEERING GEAR ADJUSTMENTS........19-24
STEERING GEAR, MANUAL;
LUBRICATION AND MAINTENANCE........0-30
STEERING GEAR, MANUAL; STEERING . . . 19-37,
19-78
STEERING GEAR, POWER..............19-78
STEERING GEAR, RECIRCULATING BALL
POWER............................19-21
STEERING GEAR REPLACEMENT . . . 19-23,19-45
STEERING GEAR SPECIFICATIONS,
MANUAL...........................19-46
STEERING GEAR SPECIFICATIONS,
POWER............................19-36
STEERING GEARS, RECIRCULATING-
BALL POWER.......................19-74
STEERING KNUCKLE AND BALL STUDS....2-32
STEERING LINKAGE...................0-28
STEERING LINKAGEÐXJ.........19-16,19-78
STEERING LINKAGEÐYJ.........19-19,19-78
STEERING PRESSURE SWITCH, POWER;
FUEL/IGNITION (XJ)................8W-30-5
STEERING PRESSURE SWITCH, POWER;
FUEL/IGNITION (YJ)..................8W-30-4
STEERING PRESSURE SWITCHÐ2.5L
ENGINE ONLY, POWER................14-63
STEERING PRESSURE SWITCHÐPCM
INPUT, POWER......................14-24
STEERING PUMP, POWER....19-11,19-74,19-78
STEERING PUMPÐINITIAL OPERATION,
POWER............................19-15
STEERING RHD......................19-74
STEERING SYSTEM COMPONENTS........19-1
STEERING SYSTEM DIAGNOSIS,
MANUAL...........................19-38
STEERING SYSTEM DIAGNOSIS, POWER . . 19-3,
19-4,19-5,19-6,19-7,19-8,19-9
STEERING SYSTEM DIAGNOSIS,
SUSPENSION..........................2-7
STEERING SYSTEM, POWER.............0-29
STEERING WHEEL...............19-49,19-58
STEM SEAL AND SPRING
REPLACEMENT, VALVE.................9-65
STEP MOLDINGÐYJ, BODY SIDE.......23-115
STOP LAMP (CHMSL)ÐXJ, CENTER
HIGH MOUNTED.....................8L-12
STOP LAMP (CHMSL)ÐYJ, CENTER
HIGH MOUNTED.....................8L-28
STOP LAMP RELAY; TRAILER TOW (XJ) . 8W-54-1
STOP LAMP RELAY; TRAILER TOW
(XJ-RHD).........................8W-54-1
STOP LAMP SWITCH..............8H-1,8H-6
STOP LAMPS AND CHMSL LAMPS;
REAR LIGHTING (XJ)...............8W-51-1
STOP LAMPS AND CHMSL LAMPS;
REAR LIGHTING (XJ-RHD)...........8W-51-1
STOP LAMPS AND CHMSL LAMPS;
REAR LIGHTING (YJ)...............8W-51-1
STORAGE BIN REMOVE/INSTALL,
SUNGLASSES........................8C-7
STORAGE, REMOTE GARAGE DOOR
OPENER............................8C-1
STORAGE, SUNGLASSES...............8C-1
STORAGEÐXJ, JACK.................23-97
STRAIGHTENING, FRAME..............13-13
STRAP, FUEL TANK SUPPORT............13-4
STRENGTH, BOLT..................Intro.-15
STRIKER AND BUMPERÐXJ, REAR
SEATBACK LATCH....................23-84
STRIKER REPLACEMENTÐXJ, HOOD
LATCH .............................23-11
STRIKER REPLACEMENTÐXJ, SAFETY
LATCH .............................23-11
STRIKERÐYJ, HALF-METAL DOOR
LATCH ............................23-135
STRIKERÐYJ, TAILGATE LATCH
........23-123
STRIPES/DECALSÐXJ, BODY
...........23-21
STRIPES/DECALSÐYJ, BODY
..........23-116
STRIPÐXJ, DOOR EDGE GUARD/EDGE
PROTECTOR
........................23-54
STUD REPLACEMENTÐXJ, LIFTGATE
SUPPORT ROD BALL
.................23-63STUDS, STEERING KNUCKLE AND BALL . . . 2-32
SUN GEAR AND NO. 1 ONE-WAY
CLUTCH OVERHAUL.................21-238
SUNGLASSES STORAGE................8C-1
SUNGLASSES STORAGE BIN REMOVE/
INSTALL............................8C-7
SUNVISORSÐXJ.....................23-93
SUNVISORSÐYJ....................23-155
SUPPLY TEST, VACUUM................8H-6
SUPPORT BRACKET REPLACEMENTÐXJ,
INTERIOR REARVIEW MIRROR..........23-68
SUPPORT CROSSMEMBERÐXJ,
RADIATOR...........................23-6
SUPPORT OVERHAUL, OVERDRIVE.....21-226
SUPPORT OVERHAUL, OVERRUNNING
CLUTCHÐLOW-REVERSE DRUMÐ
REAR.............................21-125
SUPPORT PLATE REPLACEMENT.........5-58
SUPPORT ROD BALL STUD
REPLACEMENTÐXJ, LIFTGATE..........23-63
SUPPORT ROD CYLINDER DISPOSALÐ
XJ, LIFTGATE........................23-63
SUPPORT ROD CYLINDERÐXJ,
LIFTGATE...........................23-62
SUPPORT STRAP, FUEL TANK............13-4
SUPPORTS, ENGINE...................0-21
SUPPRESSION, RADIO NOISE............8F-2
SURFACE TOUCH-UP, PAINTED.........23-158
SUSPENSION AND STEERING SYSTEM
DIAGNOSIS...........................2-7
SUSPENSION ARM, LOWER.............2-13
SUSPENSION ARM, UPPER.............2-12
SUSPENSION COMPONENTS.............3-1
SUSPENSION COMPONENTS, XJ FRONT . . . 2-49
SUSPENSION COMPONENTS, XJ REAR....3-51
SUSPENSION COMPONENTS, YJ FRONT . . . 2-49
SUSPENSION COMPONENTS, YJ REAR....3-51
SUSPENSION, FRONT...................2-1
SUSPENSION, XJ......................3-3
SUSPENSION, XJ FRONT...............2-11
SUSPENSION, YJ......................3-6
SUSPENSION, YJ FRONT...............2-15
SWITCH - XJ, MULTI-FUNCTION..........8J-4
SWITCH, ACCELERATION; ANTI-LOCK
BRAKES (XJ)......................8W-32-1
SWITCH, ACCELERATION; ANTI-LOCK
BRAKES (XJ-RHD).................8W-32-1
SWITCH, ACCELERATION; ANTI-LOCK
BRAKES (YJ)......................8W-32-1
SWITCH, ACCELERATION; BRAKES........5-35
SWITCH ADJUSTMENT, BRAKELIGHT......5-32
SWITCH AND KEY CYLINDER SERVICE,
IGNITION...........................8D-26
SWITCH AND PLUG LOCATIONS,
TRANSMISSION......................21-34
SWITCH, BLOWER MOTOR.............24-16
SWITCH, BRAKE.....................14-59
SWITCH CONTINUITY (LEFT POSITION),
POWER MIRROR......................8T-3
SWITCH CONTINUITY, POWER SEAT......8R-2
SWITCH CONTINUITY (RIGHT
POSITION), POWER MIRROR............8T-3
SWITCH CONTINUITY TESTS, IGNITION . . . 8D-30
SWITCH, DEFOGGER..............8N-1,8N-3
SWITCH, DRIVER'S DOOR JAMB.....8U-1,8U-2
SWITCH, DRIVER'S SEAT BELT......8U-1,8U-3
SWITCH, EXTENDED IDLE...........8W-30-5
SWITCH, FIN SENSING CYCLING
CLUTCH.......................24-15,24-31
SWITCH, FOUR-WHEEL DRIVE (4WD);
INSTRUMENT CLUSTER (XJ-RHD).....8W-40-2
SWITCH, FOUR-WHEEL DRIVE (4WD);
TRANSMISSION CONTROLS (XJ-RHD) . . 8W-31-1
SWITCH, HORN.......................8G-1
SWITCH, IGNITION; BRAKES.............5-35
SWITCH, IGNITION; FUEL/IGNITION (XJ) . 8W-30-1
SWITCH, IGNITION; FUEL/IGNITION (YJ) . 8W-30-1
SWITCH, IGNITION; FUEL/IGNITION
(XJ-RHD).........................8W-30-1
SWITCH, IGNITION KEY-IN
..........8U-1,8U-2
SWITCH INPUT, BRAKE; ANTI-LOCK
BRAKES (XJ)
......................8W-32-2
SWITCH INPUT, BRAKE; ANTI-LOCK
BRAKES (XJ-RHD)
.................8W-32-2
SWITCH INPUT, BRAKE; ANTI-LOCK
BRAKES (YJ)
......................8W-32-2
SWITCH INPUT, BRAKE; FUEL/IGNITION
(XJ)
.............................8W-30-5
JINDEX 27
Description Group-Page Description Group-Page Description Group-Page