load KIA CADENZA 2020 Navigation System Quick Reference Guide

6-15
Accepting an incoming call
over Bluetooth
The system screen alerts you when you receive a call while
connected using Bluetooth.
Perform any of the following methods:
000eTouch Accept on the screen.
000eOn the steering wheel, press the Call button.
Dialing with voice recognition
When you connect your mobile device to the system via
Bluetooth, contacts from the device are downloaded to the
system, and you can choose to call them using voice recognition.
 A
To call using voice recognition, there must be contacts stored
on the system.
1 Perform any of the following methods:
000eOn the All Menus screen, touch Phone.
000eOn the steering wheel, press the Call button.
2 On the Bluetooth Call screen, touch .
3 When a guiding beep is heard, say the name of
the contact to make a phone call.
The system dials the selected contact.
 A
In case of the dial pad screen, touch say the phone
number to make a call.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010017000e00120016>


ß
1



ß
1


6-16
Using functions during a call
During a call, the following screen appears.
Touch to use the available options.
b
c
d
ef
ah
g
a a Returns to the previous step.
b b Can turn off the microphone so that the other party cannot
hear you.
c c Can adjust the microphone volume.
d d Displays or hides the dial pad screen.
e e Used to switch the call to the mobile phone. This option may
not be available in some phone models.
f f Used to end a call.
g g Activate the lock mode to protect personal data. The data
downloaded from the mobile phone stays hidden while this
mode is on.

6-17
Switching to another call
You can receive another incoming call while in a call. This option
is available only when the connected mobile phone supports the
call hold function. The original call is put on hold.
To switch between two calls, use either option.
000eTouch Switch.
000eTouch a displayed phone number.
 A
This option may not be available in some phone models.
h h The list of menu items appears.
000ePrivacy Mode: Activate the lock mode to protect personal
data. The data downloaded from the mobile phone stays
hidden while this mode is on (if equipped).
000eSplit Screen: Can turn on or off the split screen mode.
 A
If you set the microphone volume too high, the other party
may have a diffi culty understanding you due to noise or
echoing, depending on their mobile phone and surroundings.
Setting the volume to 30 or lower is recommended.
 A
When the caller is in the contact list, the caller’s name and
phone number of the caller are displayed. Otherwise, only the
phone number appears.
 A
During a call with a Bluetooth connection, you cannot switch
to another screen such as Radio/Media mode.
 A
Depending on the phone model, the call volume of the other
party may diff er.
 A
Depending on the phone model, the telephone number may
not appear.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010017000e00120018>


ß
1



ß
1


6-18
Checking a new message
When a message is received, the new message notifi cation
window appears.
To check the message, touch View.
cd
a
e
b
a a View caller details.
b b Activate the lock mode to protect personal data. The data
downloaded from the mobile phone stays hidden while this
mode is on.
c c Can see the message details.
d d Reads out the message through the speakers in the vehicle.
e e Used to close the notifi cation window.
 A
The message notifi cation window does not appear when the
privacy mode is enabled or the message notifi cation is turned
off .
Checking a new message over
Bluetooth
After connecting a mobile phone via Bluetooth, you can check
the received messages through the system screen and listen to
voice messages converted from the text messages. This option is
available when a mobile phone is connected via Bluetooth. You
can also send the brief reply message registered in the system.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010017000e00120019>


ß
1



ß
1


6-19
Checking a new message from the list
1 Perform any of the following methods:
000eOn the All Menus screen, touch Phone.
000eOn the steering wheel, press the Call button.
2 On the Bluetooth Call screen, touch .
3 Select a message from the list.
4 Check the message.
b
a
e
g
cd
f
a a Returns to the previous step.
b b Reads out the message through the speakers in the
vehicle.
c c Used to select a message registered in the system for
sending a brief reply message.
d d Used to make a call to a message sender.
e e Used to move to the previous or next message.
Bluetooth message screen
b
a
d
e
c
a a Returns to the previous step.
b b View the list of received messages.
c c Find and connect other Bluetooth devices.
d d Can text a message by using the voice recognition.
> See “Sending a text by using the voice recognition.”
e e The list of menu items appears.
000eMessage Settings: Displays the message settings screen
(if equipped).
000ePrivacy Mode: Activate the lock mode to protect personal
data. The data downloaded from the mobile phone stays
hidden while this mode is on.
000eChange Device: Find and connect other Bluetooth
devices.
000eBluetooth Settings: Can change the Bluetooth settings.
000eUser's Manual on Web (QR Code): Displays the QR code
that provides access to the online user manual for the
system.
000eSplit Screen: Can turn on or off the split screen mode.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010017000e0012001a>


ß
1



ß
1


6-20
Sending a text by using the voice
recognition
When you connect your mobile device to the system via
Bluetooth, contacts from the device are downloaded to the
system so you can text a message to a contact by using the voice
recognition.
 A
To call using voice recognition, there must be contacts stored
on the system.
 A
It is available only when the UVO service is active.
1 Perform any of the following methods:
000eOn the All Menus screen, touch Phone.
000eOn the steering wheel, press the Call button.
2 On the bluetooth message screen, touch .
3 When a guiding beep is heard, say the message.
The system sends the text to the selected contact.
f f Can text a message by using the voice recognition.
> See “Sending a text by using the voice recognition.”
g g The list of menu items appears.
000eMessage Settings: Displays the message settings
screen (if equipped).
000eBluetooth Settings: Can change the Bluetooth
settings (if equipped).
000eSplit Screen: Can turn on or off the split screen mode.
 A
The auto-reply messaging may not be available depending on
the smartphone model.
 A
To edit or delete a message, pull over the vehicle at a
safe place and access the messaging function on your
smartphone. You cannot edit or delete a message from the
system.
 A
When an iPhone is connected to the system, there are some
restrictions when receiving messages as follows:
000dOnly the sender name appears when the sender
information is saved.
000dWhen the sender information is not saved, only the phone
number appears.
000dYou cannot use the auto-reply message function.
000dWhen the incoming message notifi cation or lock-screen
view option is off , messages cannot be received.
 A
The message reader function may not be supported
depending on the system language.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010017000e00130011>


ß
1



ß
1


7-7
Navigation commands
Command Function
Find Address>You can search for a designated POI
name or address.
For example, say "Find Kia dealerships"
or "Find Kia dealerships in Seattle."
Find Address in
You can search for a location with its
address in a designated state. Say an
address in order of the house number,
street, and city.
Find You can search for a designated
category of POIs nearby.
> See “POI
names.”
Frequently Visited
PointsYou can select a location from the list of
your frequently visited points. Say the
number of the location you want.
Address Book Access the address book screen.
Command Function
Send Message
to
You can send a text message to that
contact more directly.
This command is available only if UVO is
activated.
Change Bluetooth
DeviceYou can search for and connect another
Bluetooth device.
 A
To use call commands, your mobile phone must be connected
to the system via Bluetooth and your contacts must be
downloaded.
> See “Connecting a Bluetooth device.”
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010018000e0018>


ß
1



ß
1


10-9
System status indicator icons
You can see the system status by checking the status indicator
icons at the top right of the system screen.
Diff erent status indicator icons appear when each function is
performed. The meanings of the icons are as follows:
Mute/memo recording
Navigation sound muted
Radio/Media sound muted
All sound outputs muted
Recording a voice memo
Bluetooth/call
Connecting a phone via Bluetooth
Connecting an audio device via Bluetooth
Connecting a phone and an audio device via Bluetooth
Making a call via a Bluetooth phone
Bluetooth phone’s microphone off
Downloading the contact and list of recent calls from
the connected Bluetooth phone
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f0045004300010001000100120011000e001a>


ß
1



ß
1


10-11
Bluetooth
QWhich functions can I use via Bluetooth?
AYou can use the hands-free call function with a mobile
phone connected. You can also play music after
connecting an audio device such as MP3 player or mobile
phone.
> See “Making a call via Bluetooth.“, “Listening to music
via Bluetooth.”
QHow can I register a Bluetooth device?
AOn the All Menus screen, touch Setup >
Device
Connections >
Bluetooth >
Bluetooth Connections >

Add New. From the Bluetooth device to be connected,
search for the vehicle system and register it. Use the
Bluetooth device to enter or approve the authentication
number displayed on the system. Then the device is
added to the list of Bluetooth devices in the system and
automatically connected to the system.
> See “Connecting
a Bluetooth device.”
FAQ
Navigation
QHow can I update the map?
AYou can download the latest map data to a USB device
and use the device to update the map.
> See “Updating the
system software and map.”
QGuidance is made by bypassing the route or the speed
camera alerts are late.
ASelect another route after setting the route options.
On the map screen, touch Menu >
Route >
Route
Options to change the settings and resume navigation.
> See “Changing the route search criteria.”
When the system is not updated, update the software
and map and then perform search again.
> See “Updating
the system software and map.”
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f0045004300010001000100120011000e00120012>


ß
1



ß
1


10-12
Broadcast reception
QI turned on the radio while driving but I heard no sound
but noise.
ADepending on the location, obstacles may cause
reception to deteriorate.
Radio reception rate may also drop when an on-glass
antenna is mounted on the rear window and the window
is tinted with metallic window fi lms.
QI bought a new mobile phone and want to replace my old
phone with the new one to connect the system. How can
I register the new phone to the system?
AAn additional device can be registered in the same way
as in registration of a new device. You can register up
to 6 devices in the list of Bluetooth devices. To delete a
previously registered device, touch Delete Devices from
the list of Bluetooth devices, select the device to delete,
and then touch Delete.
> See “Deleting a registered device.”
QHow can I access the list of contacts while using a
Bluetooth phone?
AApprove access to the contacts when connecting your
mobile phone to the system via Bluetooth. The list of
contacts on the phone is downloaded to the system. To
see the downloaded list of contacts, press the Call button
on the steering wheel and touch
on the call screen.
You can search for a contact and make a call to the
contact, or add the contact to the favorites.
> See “Dialing
from the contacts.”
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f0045004300010001000100120011000e00120013>


ß
1



ß
1