phone KIA CADENZA 2020 Navigation System Quick Reference Guide
[x] Cancel search | Manufacturer: KIA, Model Year: 2020, Model line: CADENZA, Model: KIA CADENZA 2020Pages: 243, PDF Size: 10.41 MB
Page 135 of 243
6-17
Switching to another call
You can receive another incoming call while in a call. This option
is available only when the connected mobile phone supports the
call hold function. The original call is put on hold.
To switch between two calls, use either option.
000eTouch Switch.
000eTouch a displayed phone number.
A
This option may not be available in some phone models.
h h The list of menu items appears.
000ePrivacy Mode: Activate the lock mode to protect personal
data. The data downloaded from the mobile phone stays
hidden while this mode is on (if equipped).
000eSplit Screen: Can turn on or off the split screen mode.
A
If you set the microphone volume too high, the other party
may have a diffi culty understanding you due to noise or
echoing, depending on their mobile phone and surroundings.
Setting the volume to 30 or lower is recommended.
A
When the caller is in the contact list, the caller’s name and
phone number of the caller are displayed. Otherwise, only the
phone number appears.
A
During a call with a Bluetooth connection, you cannot switch
to another screen such as Radio/Media mode.
A
Depending on the phone model, the call volume of the other
party may diff er.
A
Depending on the phone model, the telephone number may
not appear.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010017000e00120018> ß
1 ß
1
Page 136 of 243
6-18
Checking a new message
When a message is received, the new message notifi cation
window appears.
To check the message, touch View.
cd
a
e
b
a a View caller details.
b b Activate the lock mode to protect personal data. The data
downloaded from the mobile phone stays hidden while this
mode is on.
c c Can see the message details.
d d Reads out the message through the speakers in the vehicle.
e e Used to close the notifi cation window.
A
The message notifi cation window does not appear when the
privacy mode is enabled or the message notifi cation is turned
off .
Checking a new message over
Bluetooth
After connecting a mobile phone via Bluetooth, you can check
the received messages through the system screen and listen to
voice messages converted from the text messages. This option is
available when a mobile phone is connected via Bluetooth. You
can also send the brief reply message registered in the system.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010017000e00120019> ß
1 ß
1
Page 137 of 243
6-19
Checking a new message from the list
1 Perform any of the following methods:
000eOn the All Menus screen, touch Phone.
000eOn the steering wheel, press the Call button.
2 On the Bluetooth Call screen, touch .
3 Select a message from the list.
4 Check the message.
b
a
e
g
cd
f
a a Returns to the previous step.
b b Reads out the message through the speakers in the
vehicle.
c c Used to select a message registered in the system for
sending a brief reply message.
d d Used to make a call to a message sender.
e e Used to move to the previous or next message.
Bluetooth message screen
b
a
d
e
c
a a Returns to the previous step.
b b View the list of received messages.
c c Find and connect other Bluetooth devices.
d d Can text a message by using the voice recognition.
> See “Sending a text by using the voice recognition.”
e e The list of menu items appears.
000eMessage Settings: Displays the message settings screen
(if equipped).
000ePrivacy Mode: Activate the lock mode to protect personal
data. The data downloaded from the mobile phone stays
hidden while this mode is on.
000eChange Device: Find and connect other Bluetooth
devices.
000eBluetooth Settings: Can change the Bluetooth settings.
000eUser's Manual on Web (QR Code): Displays the QR code
that provides access to the online user manual for the
system.
000eSplit Screen: Can turn on or off the split screen mode.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010017000e0012001a> ß
1 ß
1
Page 138 of 243
6-20
Sending a text by using the voice
recognition
When you connect your mobile device to the system via
Bluetooth, contacts from the device are downloaded to the
system so you can text a message to a contact by using the voice
recognition.
A
To call using voice recognition, there must be contacts stored
on the system.
A
It is available only when the UVO service is active.
1 Perform any of the following methods:
000eOn the All Menus screen, touch Phone.
000eOn the steering wheel, press the Call button.
2 On the bluetooth message screen, touch .
3 When a guiding beep is heard, say the message.
The system sends the text to the selected contact.
f f Can text a message by using the voice recognition.
> See “Sending a text by using the voice recognition.”
g g The list of menu items appears.
000eMessage Settings: Displays the message settings
screen (if equipped).
000eBluetooth Settings: Can change the Bluetooth
settings (if equipped).
000eSplit Screen: Can turn on or off the split screen mode.
A
The auto-reply messaging may not be available depending on
the smartphone model.
A
To edit or delete a message, pull over the vehicle at a
safe place and access the messaging function on your
smartphone. You cannot edit or delete a message from the
system.
A
When an iPhone is connected to the system, there are some
restrictions when receiving messages as follows:
000dOnly the sender name appears when the sender
information is saved.
000dWhen the sender information is not saved, only the phone
number appears.
000dYou cannot use the auto-reply message function.
000dWhen the incoming message notifi cation or lock-screen
view option is off , messages cannot be received.
A
The message reader function may not be supported
depending on the system language.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010017000e00130011> ß
1 ß
1
Page 140 of 243
7-2
Voice recognition
With the voice recognition function, you can access various
functions of the infotainment system without manipulating the
screen or buttons. This function prevents driver distraction and
dangerous situations.
Use voice commands to access various functions easily.
A
The system can recognize the specifi ed voice commands.
> See “Available voice commands” or the voice recognition help.
A
Note the following for accurate delivery of command when
saying it.
000dPronounce a command accurately and naturally like a
conversation.
000dKeep the correct posture and say commands toward the
direction of the microphone.
A
Voice recognition is automatically ended when:
000dYou make or receive a call.
000dA media source is connected or disconnected.
000dThe front or rear cameras operate (if equipped).
000dThe [RADIO] or [MEDIA] button is pressed to perform
another function.
000dRerouting or other unexpected action is made due to
deviation from the route during guidance. A
Voice recognition may not work properly when:
000dThe sunroof or windows are open so the wind is strong.
000dThe fan speed of the air conditioner or heater is high (level
3 or below is recommended).
000dThe vehicle is passing through a tunnel.
000dThe vehicle is driving on an unpaved road and its noise and
vibration are loud.
000dNoise is loud due to a heavy rain or storm.Using the voice recognition
1 On the steering wheel, press the Voice
Recognition button.
Voice recognition starts along with voice guidance.
A
To skip the voice guidance, press the Voice Recognition
button on the steering wheel.
2 When a beep sound is heard, say a command to
perform (e.g. navigation, music, call).
> See “Available
voice commands” or the voice recognition help.
The recognized command appears in text at the top of the
screen and the corresponding function is performed.
A
When an additional command is required to perform, the
commands that can be followed in the next step appear
on the screen. Say a command or touch a command.
A
When there are several similar commands, say a
command number to perform.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010018000e0013> ß
1 ß
1
Page 141 of 243
7-3
Voice recognition screen
ba
de
f
c
a a According to voice recognition, the icons for voice recognition,
voice guidance, and command process appear.
b b The recognized voice command appears in text.
c c Shows the representative voice command.
d d Ends the voice recognition.
e e Displays the voice recognition help.
f f The list of menu items appears.
000eSplit Screen: Can turn on or off the split screen mode.
3 To end the voice recognition, perform one of the
following methods:
000eIn standby mode for voice recognition, say "Exit"
000eOn the voice recognition screen, touch Exit.
000eOn the steering wheel, press and hold the Voice
Recognition button.
A
When the Voice Recognition button is pressed in standby
mode for voice recognition, the standby time is extended.
A
When the voice recognition is not available, press the
Voice Recognition button on the steering wheel and use
the voice recognition on your smartphone via phone
projection.
> See “Using the phone projection function.”
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010018000e0014> ß
1 ß
1
Page 144 of 243
7-6
Command Function
Call
OtherThe system dials a phone number
saved as other than "Mobile", "Work", or
"Home" for that contact.
Dial Number You can make a call. Say a phone
number to begin a call.
Dial
phone number.
Send Message You can send a text message to one
of your mobile phone's contacts. Say
a contact's name and then enter the
message content by following the
guidance.
This command is available only if UVO is
activated.
Send Message to
specifi c contact. Enter the message
content by following the guidance.
This command is available only if UVO is
activated. Available voice commands
Call commands
Command Function
Call You can make a call to one of your
mobile phone's contacts. Say a contact's
name to begin a call.
Call
that contact. If the contact has multiple
phone numbers, select a phone number.
Call
MobileThe system dials the phone number
saved as "Mobile" for that contact.
Call
WorkThe system dials the phone number
saved as "Work" for that contact.
Call
HomeThe system dials the phone number
saved as "Home" for that contact.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010018000e0017> ß
1 ß
1
Page 145 of 243
7-7
Navigation commands
Command Function
Find
name or address.
For example, say "Find Kia dealerships"
or "Find Kia dealerships in Seattle."
Find Address in
address in a designated state. Say an
address in order of the house number,
street, and city.
Find
category of POIs nearby.
> See “POI
names.”
Frequently Visited
PointsYou can select a location from the list of
your frequently visited points. Say the
number of the location you want.
Address Book Access the address book screen.
Command Function
Send Message
to
contact more directly.
This command is available only if UVO is
activated.
Change Bluetooth
DeviceYou can search for and connect another
Bluetooth device.
A
To use call commands, your mobile phone must be connected
to the system via Bluetooth and your contacts must be
downloaded.
> See “Connecting a Bluetooth device.”
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010018000e0018> ß
1 ß
1
Page 148 of 243
7-10
Radio commands
Command Function
FM <87.5 to 107.9> Turn on the FM radio with that
frequency.
AM <530 to 1710> Turn on the AM radio with that
frequency.
SiriusXM <0 to 999> Turn on the SiriusXM radio with that
channel number.
Other commands
Command Function
Help Move to the help screen.
Line <1 to 4>* Select an item with the designated
number on a list. Simple numbers, such
as "One" or "Two," can be recognized.
Yes* Accept a notifi cation asking for your
confi rmation in an exceptional situation.
Command Function
No* Deny a notifi cation asking for your
confi rmation in an exceptional situation.
Next* If there are more than fi ve items on a list,
scroll to the next page.
Previous* If you scroll to the next page of a list,
scroll back to the previous page.
Manual Input* When using the Dial Number command,
open the keypad to enter a phone
number manually.
Go Back* Returns to the previous step.
Exit End voice recognition.
* These commands are available only in certain situations.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010018000e00120011> ß
1 ß
1
Page 158 of 243
7-20
a a Returns to the previous step.
b b Displays the list of recorded voice memos.
c c Starts or pauses the recording.
d d Stops recording.
e e The list of menu items appears.
000eDelete: Can delete a voice memo.
000eSave to USB Device: Can record a voice memo to a USB
storage device. You can delete voice memos in the USB
storage devices formatted in FAT16/32.
000eStorage Information: Can see the fi le size of recorded
voice memos.
000eUser's Manual on Web (QR Code): Displays the QR code
that provides access to the online user manual for the
system.
000eSplit Screen: Can turn on or off the split screen mode.
Voice Memo
You can use the microphone on the vehicle to record and play
voice memos.
Using the voice memos
On the All Menus screen, touch Voice Memo.
Voice memo screen
ae
cdb
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010018000e00130011> ß
1 ß
1