roof KIA CADENZA 2020 Navigation System Quick Reference Guide
[x] Cancel search | Manufacturer: KIA, Model Year: 2020, Model line: CADENZA, Model: KIA CADENZA 2020Pages: 243, PDF Size: 10.41 MB
Page 87 of 243

5-5 000dThe vehicle is driving in a rugged mountain area or on a
steep curve road.
000dThe vehicle is entering a public road after making a turn
through the turntable in an underground parking lot or
multi-story parking lot.
000dThe vehicle stops and starts repeatedly or moves slowly in
front of an intersection.
000dThe system reboots after the vehicle battery has been
recharged or replaced.
000dThe vehicle is driving on a slippery road due to heavy snow,
etc.
000dThe tires have been replaced recently or spare tires (or
studless tires) are used.
000dImproper-sized tires are used or the pressure of each tire is
diff erent.
000dThe replaced tire is worn out or the studless tires have been
used for over two seasons.
000dA roof carrier is installed on the vehicle.
000dOn a highway. continued driving causes the system to
perform map matching or apply the updated GPS data.
Page 140 of 243

7-2
Voice recognition
With the voice recognition function, you can access various
functions of the infotainment system without manipulating the
screen or buttons. This function prevents driver distraction and
dangerous situations.
Use voice commands to access various functions easily.
A
The system can recognize the specifi ed voice commands.
> See “Available voice commands” or the voice recognition help.
A
Note the following for accurate delivery of command when
saying it.
000dPronounce a command accurately and naturally like a
conversation.
000dKeep the correct posture and say commands toward the
direction of the microphone.
A
Voice recognition is automatically ended when:
000dYou make or receive a call.
000dA media source is connected or disconnected.
000dThe front or rear cameras operate (if equipped).
000dThe [RADIO] or [MEDIA] button is pressed to perform
another function.
000dRerouting or other unexpected action is made due to
deviation from the route during guidance. A
Voice recognition may not work properly when:
000dThe sunroof or windows are open so the wind is strong.
000dThe fan speed of the air conditioner or heater is high (level
3 or below is recommended).
000dThe vehicle is passing through a tunnel.
000dThe vehicle is driving on an unpaved road and its noise and
vibration are loud.
000dNoise is loud due to a heavy rain or storm.Using the voice recognition
1 On the steering wheel, press the Voice
Recognition button.
Voice recognition starts along with voice guidance.
A
To skip the voice guidance, press the Voice Recognition
button on the steering wheel.
2 When a beep sound is heard, say a command to
perform (e.g. navigation, music, call).
> See “Available
voice commands” or the voice recognition help.
The recognized command appears in text at the top of the
screen and the corresponding function is performed.
A
When an additional command is required to perform, the
commands that can be followed in the next step appear
on the screen. Say a command or touch a command.
A
When there are several similar commands, say a
command number to perform.
, @ / " ' , @ : ( 1 &