turn signal KIA CADENZA 2020 Navigation System Quick Reference Guide

9-9
Door (if equipped)
You can confi gure the operation environment for the trunk and
doors.
Auto Lock (if equipped)
You can set the time to automatically lock all doors.
Auto Unlock (if equipped)
You can set the time to automatically unlock all doors.
Ambient Light (if equipped)
You can set the brightness and color of the ambient light.
000eBrightness: Can set the brightness of the ambient light.
000eColor: Can change the color of the ambient light. You can
select or directly enter the desired color.
One Touch Turn Signal (if equipped)
You can set the number of turn signal lamp fl ashes when the
lamp lever is operated.
Headlight Delay (if equipped)
You can set to turn off the taillights and headlights in 15 seconds
after turning off the vehicle to ensure visibility.
High Beam Assist (if equipped)
You can set to automatically control the high beam when an
oncoming vehicle is approaching to decrease the high beam
glare.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e001a>


ß
1



ß
1


10-6
Phone projection
Symptom Possible cause Solution
The phone projection function
is not performed when a
smartphone is connected using
a USB cable.Phone projection is not
supported.
Visit the website to check whether your smartphone supports the
phone projection.
000eAndroid Auto: https://support.google.com/androidauto
000eApple CarPlay: http://www.apple.com/ios/carplay
The function is inactive.
000eOn the All Menus screen, touch Setup >
Device Connections,
select the function to use, and then turn on the phone projection
option.
000eMake sure that the phone projection is not disabled in the
application settings or block-out settings on your smartphone.
Smartphone is encountered with
poor operation or malfunction. 000eCheck that the smartphone battery level is not too low.
Recognition may not work properly when the battery level is too
low.
000eThe phone projection may not work properly when the signal
strength is weak.
000eWhen the smartphone is locked, fi rst unlock it.
000eInitialize the smartphone and connect the device again.
A black screen appears when
the phone projection is
activated or in use.The smartphone malfunctions.
000eRemove the USB cable from the smartphone and connect the
device again.
000eInitialize the smartphone and connect the device again.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f0045004300010001000100120011000e0017>


ß
1



ß
1